How to completely reboot Xiaomi Redmi 9A: all ways to reset and restore

Xiaomi Redmi 9A is a popular budget model with a MediaTek Helio G25 processor and basic MIUI firmware. However, even such a simple device can start to slow down, freeze or refuse to turn on. In 90% of cases, a full reboot solves the problem - from a regular restart to a hard reset via Recovery Mode.

In this article, you’ll find 5 proven ways to reboot, including emergency techniques for a hung screen, black display or infinite boot.We’ll break down how to reset to factory settings without losing data (if possible), how to log in to Fastboot and when to use it. EDL-All instructions are adapted specifically for Redmi. 9A with regard to its hardware features.

1.Soft reboot: Standard restart

If the phone is responsive to touch, but it's unstable (apps fly out, interfaces are down), start with a software restart. This method is secure and doesn't delete user data.

How to do this:

• 📱 Press and hold the Power button (located on the right) for 3-5 seconds.
• 🔄 In the menu that appears, select Reboot (or Restart in English firmware).
• ⏳ Wait until the process is complete (usually takes 20 to 40 seconds).

If the screen is unresponsive to presses, but the phone vibrates when holding the power button, try a forced reboot: Hold Power + Volume Up 10-15 seconds until the device restarts.

⚠️ Warning: Forced restart interrupts all background processes. If the system was being updated at the time of the reboot, it can damage the firmware and cause the phone to be refashioned through the phone. EDL.

2.Hard reset via Recovery Mode

When Redmi 9A It doesn't turn on, downloads to the Mi logo or reboots cyclically, and resets through Recovery will help, which removes all data from internal memory (photos, contacts, apps), but saves files to the user's memory. SD-map (if it is installed).

Step-by-step:

1. Turn off the phone (hold power for 10+ seconds if it freezes).
2. Press the Power + Volume combination and hold for 8-12 seconds until the Mi logo appears.
3. Release the buttons – the Recovery Mode menu will open (in English or Chinese).
4. Use volume buttons for navigation and power to select Wipe Data → Wipe All Data.
5. Confirm the action by choosing Confirm.
6. After reset, select Reboot → Reboot to System.

Make sure the battery is charged at least 30 times%|Extract. SIM-map SD-map (optional)|Remember your Mi Account details (if you were tied in)|Prepare a backup of important files (if the phone is still switched on)

-->

It takes 3-5 minutes. After you reboot, you'll need to reconfigure your phone, like after you bought it. If the reset didn't work, go to the Fastboot method.

3.Reboot via Fastboot (for power users)

Fastboot is an engineering mode that allows you to reflash your phone without fully booting your system. It's useful if the Redmi 9A:

• 🔄 Fixed with the Mi logo;
• 🖥️ No download beyond the animation download;
• 🔧 Requires flashing after a failed update.

To work, you will need a computer with installed Xiaomi drivers and the Mi Flash Tool utility (you can download on the official website).

Instructions:

1. Turn off the phone.
2. Press Power + Volume down for 10-15 seconds until the image of a rabbit in a hat appears.
3. Connect your phone to your PC through USB-cable (preferably original).
4. Open the Command Prompt (Windows) or Terminal (Mac/Linux) and type:

fastboot devices

If the device is determined (the serial number will appear), reset:

fastboot erase userdata


fastboot erase cache




fastboot reboot

⚠️ Attention: fastboot erase commands will completely clear the user data partition. If you plan to reflash your phone, download the correct firmware version for Redmi first. 9A (codename dandelion from the site MIUI Download.

Soft restart via menu | Hard reset via Recovery|Fastboot teams | Never rebooted forced-->

Emergency reboot with black screen

If the Redmi 9A screen is not showing signs of life (no backlights, vibrations, sounds), but the phone is charging (the indicator burns when charging), try the “hot reboot” method:

• 🔌 Connect the phone to the charger (preferably the original one on the phone) 10W).
• 🕒 Wait 15-20 minutes – sometimes a discharged battery blocks the switch on.
• 🔄 Keep your food on. + Volume up. + Reduce volume at the same time 20-30 seconds.
• ⚡ If you see a vibration or logo, release the buttons.

If this method does not work, the problem may be:

• 🔋 Fully discharged battery (you need to leave on charging 1-2 hours);
• 🔌 Faulty cable or power supply;
• 🛠️ Hardware malfunction (requires diagnosis in the service center).

5. Reboot through EDL-regime (extreme case)

EDL (Emergency Download Mode) is an emergency firmware mode that is used when a phone has turned into a "brick" (not included, not defined by Fastboot). For Redmi 9A, logging into EDL requires:

• 🖥️ Computers with Qualcomm 9008 drivers installed;
• 🔧 Special cable or Test Point closure on board;
• 📄 Official firmware in.tgz format for dandelion;
• 🔑 Authorized Mi Account (to unlock the bootloader).

Step-by-step:

1. Download the firmware for Redmi 9A from the Xiaomi Firmware Updater website.
2. Unpack the archive and install the Qualcomm 9008 driver (instructions are in the archive with firmware).
3. Turn off your phone and connect it to your PC by holding down Power + Volume Up buttons (or close Test Point if you use a cable).
4. Device Manager should have a device QHSUSB_BULK qualcomm HS-USB QDLoader 9008.
5. Launch the Mi Flash Tool, select the unpacked firmware and press Flash.

💡

If after reset via Recovery, the phone requires you to enter a password from your Mi Account, and you do not remember it, use the official unlock service: account.xiaomi.com. Attempts to bypass protection through third-party programs can lead to blocking IMEI!

6. Frequent mistakes and how to avoid them

When rebooting the Redmi 9A, users often face typical problems:

• 🔄 "Loaded Load: The phone is constantly rebooted on the Mi logo. Solution: Reset via Recovery or reflash through Fastboot.
• 🔒 "Forgot the password from the Mi Account": After the reset requires authorization. Solution: restore access through the official website or contact support.
• 📵 "Phone not defined in Fastboot": Problem with drivers or cable.Solution: install drivers manually through Device Manager or try another one USB-port.
• 🔋 "Battery expires during firmware: Phone can turn into a brick Solution: charge the battery to at least 50% before any manipulation.

⚠️ Note: If you use unofficial firmware (such as LineageOS or Pixel Experience), rebooting through Recovery may result in data loss in the partition. /data. Always make a backup copy through TWRP (if established).

💡

Before any reboot, check the battery power - if it's below 20%, connect the phone to charge for 30 to 60 minutes.Discharge during reset or firmware can damage system files!

FAQ: Answers to Frequent Questions