How to reboot Xiaomi Redmi Note 8T: all working methods

Xiaomi Redmi Note 8T is a popular smartphone with powerful hardware, but even it sometimes hangs or requires a forced reboot. The reasons are different, from the bugs of the MIUI firmware to hardware failures after a fall. In this article, we will discuss all possible ways to reboot, including emergency methods for a completely dead device.

It is important to understand the difference between soft reboot and hard reset: the former simply restarts the system without affecting user data, while the latter can lead to file loss, we will show you when to use it, and we will warn against the typical errors that turn the time glitch into a brick without the possibility of recovery.

1. Standard reboot via menu

If your smartphone reacts to touch, but is unstable (brakes, overheats, apps fly out), start with the safest method.

Open Settings → About Phone → Reboot (or Settings → Additional → Reboot in older versions of MIUI). Alternatively, hold the power button for 2-3 seconds until the menu with the option to Reboot appears. This method saves all data and does not affect the settings.

• ✅ Pros: safe, does not require technical knowledge, works at any level of charge.
• ⚠️ Cons: It won’t help if the screen doesn’t respond or the system is completely getting stuck.
• 🔄 When to use: for minor crashes, after installing updates or “heavy” applications.

⚠️ Warning: If the smartphone brakes again after rebooting, check the free space in memory (Settings) → Storage.Redmi Note 8T It starts to glitch when your memory is more than 90%.

2. Forced button reboot (Hard Reboot)

When the screen is unresponsive to touch and the smartphone is stuck, hardware reboot will help, a technique that simulates battery extraction (although the Redmi Note 8T does not removable).

Press the power button + increase volume for 10-15 seconds until the device vibrates and the Xiaomi logo appears. Release the buttons - the smartphone will reboot. If it does not work, try the power + volume reduction combination (on some firmware).

Press Power + Volume Up for 10+ seconds | Wait for vibration and MI| Release buttons after the boot screen appears |Do not press other buttons during the process-->

Important: Don't confuse forced reboot with factory reset! The first just restarts the system, and the second deletes all data. On the Redmi Note 8T, the reset is started via Recovery or in settings (Settings → Additional → Recovery and Reset).

3. Recovery Reboot in Recovery Mode

If the smartphone is powered on but not booted beyond the Xiaomi logo (bootloop), you will need a Recovery mode that allows you to reboot the device, reset settings or install the update manually.

To enter Recovery:

1. Turn off your smartphone (forced if it doesn’t react).
2. Press Power + Volume Up before the menu with Mi Bunny appears.
3. Use the volume buttons for navigation and the power button for selection.

From the menu, select Reboot → System for a normal reboot or Wipe & Reset for a reset (remove all data!).

⚠️ Attention: Recovery Redmi Note 8T The default is Chinese firmware (even on global models). If you see the characters, select the first item on the menu, which is Reboot).

4.Reboot via Fastboot (for advanced)

If the smartphone doesn’t boot even in Recovery, but reacts to a PC connection (vibrates or is defined as Qualcomm HS-USB QDLoader), you can try rebooting it via Fastboot mode.

You'll need:

• 🖥️ Computer with installed Xiaomi drivers (download from the official website).
• 🔌 Cable USB (preferably original).
• 🛠️ Utility. ADB/Fastboot (Installation instructions - here).

Steps:

1. Turn off your smartphone.
2. Press Power + Volume Down until the screen with Fastboot appears (Android robot and Fastboot mode).
3. Connect to your PC and type in the command line: fastboot reboot For a full reboot with cache clearing: fastboot reboot recovery

1. Change. USB-port (better to use) USB 2.0 on the back of the PC).

2. disable the driver signature in Windows (instructions are here).

3. Use another cable (cheap cables often don't transmit data).-->

5.Reboot when updating the firmware

Redmi Note 8T It may be suspended during installation OTA-Update (Installing update... or progress bar doesn’t move for more than 30 minutes) In this case, you can’t pull out the battery or force the smartphone to turn off, this will damage the system files.

Act on the algorithm:

1. Wait at least 1 hour – sometimes the update freezes by 99%.
2. If progress hasn't changed, press the Power + Volume Up for 20 seconds.The smartphone should reboot in Recovery.
3. In the recovery menu, select Reboot → System. If the system doesn't boot, run Wipe cache (doesn't delete data!).

💡

Never interrupt the update during the Verifying update stage... this can damage the boot partition (boot.img).If the smartphone does not turn on after such an interrupt, you will need a complete firmware reflash through Fastboot.

If the update starts again after the restart and hangs, then the firmware file is corrupted.

1. In the file manager, go to the folder /data/ota_package/.
2. Delete the file with the.zip extension.
3. Reboot your smartphone.

6. Hardware problems: when a reboot doesn't help

If none of the methods worked, the problem may be in the iron:

• 🔋 Battery discharge: Redmi Note 8T It doesn't turn on when you charge below 3%. Connect to charging for 15-20 minutes, then try rebooting.
• 💧 Moisture intrusion: If your smartphone has been in contact with water, don't turn it on - it can cause a short circuit.
• 🔌 Faulty power plume: If the smartphone vibrates when charging is connected, but the screen remains black, the problem is with the display plume or motherboard.

For diagnosis:

1. Connect your smartphone to your PC – if it’s defined as Qualcomm HS-USB QDLoader 9008, this is a sign of hardware breech (requires firmware through the EDL-regime).
2. Light a flashlight on the screen - if you see a dim image, the illumination is faulty.
3. Check if the smartphone warms up when charging, and if it doesn't, the power controller may malfunction.

⚠️ If you have been following the fall of Redmi Note 8T It's stopped turning on, but when you connect to the charger, it's running (the characteristic "picking" is heard), so don't try to reset it. It could be a dump. BGA-chip on the board – each new switching cycle exacerbates the damage.

FAQ: Frequent questions about the Redmi Note 8T reboot