How to reboot Xiaomi Redmi 7A: all the ways from simple to complex

Xiaomi Redmi 7A is one of the most popular budget smartphones of the brand, but even it is not immune to freezes, slow operation or the need for an emergency reboot. Unlike the flagship models, the Redmi 7A does not have a hardware reset button, and an incorrect reboot can lead to data loss or exacerbate the problem. In this article, we will discuss all possible ways of rebooting, from a standard restart to a forced reset via Recovery Mode and ADB, and explain when to apply.

The Redmi 7A is powered by a Qualcomm Snapdragon 439 chip with 2GB of RAM, which sometimes causes the MIUI interface to “hang up.” If your phone stops responding to touch, doesn’t turn off in the usual way, or is stuck on the Xiaomi logo, don’t panic. In 90% of cases, the problem can be solved without contacting the service center. The main thing is to choose the right method of rebooting depending on the situation.

1. Standard reboot (soft restart)

This is the safest and most recommended way if the phone responds to touches or buttons. Soft reboot doesn't delete data or reset settings - it just restarts the system, closing all background processes.

• 📱 The smartphone started to slow down or warm up
• 🔄 Changes should be made after the update MIUI
• 🎮 Applications are flying out or not opening
• 📶 Network problems (not catching) Wi-Fi/mobile)

To perform a soft reboot:

1. Press and hold the power button (located on the right end of the body) for 2-3 seconds.
2. In the menu that appears, select Reboot (or Restart if the interface language is English).
3. Confirm the action if the system requests.

If the screen doesn't respond to touch, but the power button is working, try holding it for 10 to 15 seconds, and that will force the device to turn it off.

💡

If the problem recurs after the reboot, check the free space in memory (Settings → About Phone → Storage). Redmi 7A requires a minimum of 1.5-2 GB of free space for stable operation.

2. Forced reset (hard reset)

If the Redmi 7A is completely frozen (it does not respond to the power button, the screen is black or stuck on the logo), a forced reboot will be required. This method simulates battery extraction, which resets all current processes. On the Xiaomi Redmi 7A, you can not remove the battery without disassembling the body, so the forced restart is performed by a combination of buttons.

Instructions:

1. Hold the power button + volume button at the same time.
2. Keep them clamped for 10-20 seconds until the screen goes out (or the Xiaomi logo appears).
3. Release the buttons and wait for the phone to turn on.

If the device doesn’t turn on after that, try plugging it into a 15-30 minute charge – the battery may have run out of power to a critical level.

3.Reboot via Recovery Mode

Recovery Mode is a service mode that allows you to reset, clear the cache or reflash the device. Redmi 7A has stock MIUI Recovery installed by default, but if you have installed custom (such as TWRP), the interface and options available may differ.

To get into Recovery:

1. Turn off the phone (if it doesn’t respond, use the forced reboot from the previous section).
2. Press the power button + volume button.
3. Hold them until the Mi logo and the Recovery menu appear.

In the Recovery menu you will see the following options (navigation is done by volume buttons, the choice is by power button):

To reboot, select Reboot. → Reboot to System. If you want to reset, select Wipe Data, but note that this will delete all photos, contacts, and apps (except those on the app). SD-map).

4.Reboot via ADB (for advanced users)

If you have access to a computer and USB debugging enabled, you can reboot Redmi 7A via the command line using ADB (Android Debug Bridge).This method is useful if the screen is unresponsive, but the phone is determined by the PC.

Step-by-step:

1. Install ADB and Fastboot Tools on your computer.
2. Get Redmi on board. 7A PC-only USB-cable (preferably original).
3. Open the command line (Win + R → enter cmd → Enter).
4. Enter the command to check the connection: adb devices If the device is determined (serial number will appear), enter: adb reboot

If adb devices don’t show your phone, check:

• 🔌 Cable and port USB (Try another cable or port)
• 🔧 Is the phone on debugging enabled? USB (Settings → The phone. → Version. MIUI → 7 times to tap according to the version → return to Settings → Additionally. → For developers → Debugging by USB)
• 💻 On the PC installed drivers for Xiaomi (you can download on the official website)

Install ADB PC-only|Enable debugging on USB phone-on|Use the original cable|Check the connection of the adb device team-->

5.Reboot when getting stuck on Xiaomi logo

If the Redmi 7A is stuck on the Mi or Xiaomi logo and doesn’t load any further, it could be caused by:

• 🔄 Failed update MIUI
• 🛠️ Damage to system files
• 🔋 Critical battery discharge during the upgrade
• 📱 Incompatible firmware (if you put a customized firmware)

In this case, one of the following ways will help:

1. Hard reboot: Hold the power button for 20 to 30 seconds until the screen goes out. Then turn on the phone.
2. Clean the cache with Recovery: Go to Recovery Mode (power button + volume up). Select Wipe & Reset → Wipe Cache. Confirm the action and restart.
3. Fastboot Flashing (if the first two methods didn’t work): Download the official firmware for Redmi 7A from Xiaomi. Unpack the archive and connect the phone to your PC in Fastboot mode (power button + volume down).

💡

If the phone is stuck on the logo after an over-the-air (OTA) update, never interrupt the process! wait at least 30 minutes - sometimes the system takes a long time to optimize applications after an update.

6. Frequent mistakes and how to avoid them

A wrong reboot can make the problem worse, and here are the typical Redmi 7A users mistakes and how to avoid them:

⚠️ Note: If you run Wipe Data in Recovery but have not backed up before, all data (photos, contacts, messages) will be permanently deleted. 7A no slot for second SIM-cards instead of microSD, so reserve your data to an external drive or to the Mi Cloud cloud.

Other common mistakes:

• 🔋 Reboot at low battery charge (less than 20%) This can lead to a boot cycle.Always charge your phone to 50% or higher before manipulation.
• 🔌 Using a non-original cable when connecting to a PC ADB/Fastboot. This can cause data transmission errors.
• 📥 If the process is interrupted, the phone can turn into a brick).
• 🔄 Frequent forced restarts, which wears out the flash memory and can cause it to fail.

If after all the manipulations Redmi 7A does not turn on or load with errors, it is possible the problem in the hardware (for example, damaged motherboard or battery).

7. Prevention of hangings: how to avoid problems

To make Redmi 7A less likely to require a forced reboot, follow these tips:

• 🧹 Clean the cache once every 1-2 months through Settings → Warehouse → Cleanup.
• 🔄 Update. MIUI regularly, but not via mobile Internet (better over Wi-Fi to avoid communication interruption).
• 🚫 Do not install apps from unknown sources – they may contain viruses that cause hangings.
• 🔋 Avoid battery drains. Optimal level is 20% to 80%.
• 📱 Don't overload multitasking. 7A With 2 GB of RAM, it is better to keep no more than 3-4 applications open.

If the phone starts to brake, try rolling back the MIUI update (if the problem appeared after the update) or resetting to factory settings via Settings → Additional → Reset. Before resetting, remember to make a backup!

- The scale of window animation → No animation

- The scale of the transition animation → Without animation

- Duration of the animator → No animation.-->

FAQ: Answers to Frequent Questions