Xiaomi Redmi 6 smartphones are known for their reliability, but even the most stable devices sometimes require forced intervention in the operation of the operating system. Users often face situations when the interface stops responding to touch, applications freeze or the screen goes out and does not turn on in the usual way.
The correct reboot of Xiaomi Redmi 6 helps to clear RAM, stop background processes that consume resources, and eliminate software failures. There are several methods of restoring health, from a classic soft restart to a complete reset, it is important to understand the difference between them, so as not to lose personal data or aggravate the situation with the software.
In this article, we will discuss in detail all the available ways to resuscitate your device, how to act if the touch screen is completely no longer responsive, and what combinations of buttons will help bring the gadget back to life, and we will discuss the nuances of working with Recovery mode and preventing the loss of important files.
Standard restart through the system menu
The safest and most common method that works in regular situations where the touch screen responds to clicks is that it doesn't lose data and closes all running applications correctly, and you first need to unlock the device and find the Settings icon on your desktop or in the application menu.
Inside the settings menu, you'll need to scroll down to the bottom of the list. There's the About phone item, but in modern versions of the MIUI shell, the off button is often left out separately or in the top of the curtain menu. If you're using a standard interface, press and hold the physical on button on the side of the device.
After holding the button for 1-2 seconds, a system menu with several options will appear on the display, usually "Stop", "Reset" and sometimes "Flight Mode". You need to select the option to Reboot, the system will complete all processes and start again.
If the screen doesn't respond to a single tap, try pressing and holding the power button for longer -- about 10 seconds -- in some versions of the firmware, this causes a forced reboot without the selection menu appearing, which is normal behavior for Android devices when the interface freezes.
⚠️ Note: If after selecting the "Reset" option, the screen goes out, but the device does not turn on again during the 2-3 The problem may be a system file or a battery that is dead.
Forced button reset (Hard Reset buttons)
When the touch layer fails completely and the call menu fails, the only option is to use physical control buttons, a technique often called hard reboot, although technically a battery-removal simulation, which is safe for user data because it does not affect internal memory.
To do this, you need to find a power button on the Xiaomi Redmi 6, depending on the regional version of the device, it can be on the right or have a built-in fingerprint scanner, and you need to press this button and hold it without letting go.
The retention time can range from 10 to 20 seconds, at which point the screen can flash, vibrate or display the Mi logo. The key is to keep the button on until you feel the vibration or see the manufacturer's logo. This is a signal that the power cycle has been interrupted and restarted.
Sometimes a combination of buttons is required. If single power retention doesn't work, try pressing the volume button down and the power button at the same time. Hold them together for about 15 seconds, a combination often used to exit deep sleep or freeze at the core level of the system.
💡
If the phone is in a case, remove it before attempting a forced reboot.The case may interfere with tight button pressing, and the procedure will not work the first time.
Using Recovery Mode for Resetting
Recovery mode is a special diagnostic interface built into the device's memory regardless of the main operating system, allowing you to perform deep settings, clear the cache or completely reset, and you can only get here when the smartphone is off.
To enter this mode on Redmi 6, turn the device off completely first. If it doesn't turn off, use the forced reboot method described above, and wait until the screen goes out. Once the screen is out, immediately press the power button and the volume button "Up" at the same time.
Hold both buttons until the Mi logo appears, followed by a menu with black background and English text. Navigation is done with volume buttons (up/down), and the choice is confirmed by the power button. You need the Wipe Data item for a full reset or Reboot for a normal reboot.
⚠️ Note: Selecting Wipe All Data from the Recovery menu will result in the complete removal of all photos, contacts and apps. Use this option only if a standard reboot is not possible.
If you just want to reboot your phone through this menu, select Reboot, then Reboot to System.This command will force the main Android operating system to run, bypassing possible bootloader-level locks.
What to do if the Recovery menu is in Chinese?
Reboot via computer and ADB
For advanced users who have USB debugging enabled on their smartphone, there is a method of rebooting via a computer, a professional way to control the device even with a partially broken sensor, and this will require an ADB driver installed on a PC.
Connect your smartphone to your computer through the original USB-Open the command line on your computer and type in a command to check the connection. If the device is identified, you will see its serial number.
adb rebootThis command sends a signal to Xiaomi to safely shut down and restart, and if the system is completely getting stuck and does not respond to ADB commands, you can try the command to switch to Recovery mode:
adb reboot recoveryThis method is particularly useful when the buttons on the body are physically damaged or crashed, and allows you to initiate a reboot in a software way that is sometimes more effective than mechanical action.
Comparison of reset methods
Different situations require different approaches to restore the gadget. Below is a table that will help you quickly choose the right method depending on the current state of your Redmi 6.
| Method | Data security | When to use | Difficulty |
|---|---|---|---|
| Through the menu | 100% | Planned reboot, installation of updates | Low. |
| Holding the button (10 seconds) | 100% | The screen is dead, the sensor is not working. | Low. |
| ADB team | 100% | The buttons are damaged, you need a remote reboot. | Tall. |
| Recovery (Wipe) | 0% (Total removal) | Critical system failure, forgotten password | Medium |
As you can see from the table, physical buttons are enough for most household problems, and more sophisticated methods should only be used if you have the appropriate skills and understanding of the risks.
💡
The most versatile way for Redmi 6 is to hold the power button for 15 seconds, and it works in 95% of the freezes.
Frequent problems and their solution
Sometimes users find that the phone, after trying to restart, enters an infinite loop (bootloop), the screen lights up, the logo appears, and the process repeats itself, which may indicate a corrupt system file or a conflict of a newly installed application.
In this situation, try to boot into Safe Mode, and to do this, when you turn on, when the Mi logo appears, quickly press and hold the volume button "Down." If the phone turns on, it means that the problem is in third-party software. Delete the recently installed programs.
- 🔋 Battery discharge: If the phone doesn't respond to buttons, put it on charge at 30-40 Lithium-ion batteries in older models can go into deep discharge, blocking the possibility of turning on.
- 🌡️ Overheating: If the device's body is hot, the system can block the onset to protect components.Let the phone cool off when off.
- 💾 Overflowing memory: Lack of space for system files also causes cyclical reboots. Try logging in to Recovery and clearing the cache if this option is available in your version.
If none of these methods works and the phone continues to behave in an unstable way, you may need to flash the device through the computer using the Mi Flash utility.
☑️ Checklist before resetting settings
Failure prevention and optimization
To avoid the frequent need for a forced reboot, certain rules of operation of the Xiaomi Redmi 6 should be followed. Regular memory cleaning and removal of unused applications reduce the load on the processor.
Use the built-in Security app, which is preinstalled in the MIUI shell. Cleanup helps to delete temporary files that may accumulate and slow down the system, and it is also recommended not to install applications from unknown sources.
- 🔄 Software Update: Follow system updates in the Settings menu → About the phone. Developers often release patches that fix memory errors.
- 🚫 Disabling animations: In the menu for developers, you can reduce the scale of animation, which will visually speed up the interface on budget models.
- 📵 Background Control: Periodically close applications running in the background through the menu of recent tasks.
Keeping these simple rules in mind will make your device more comfortable and live longer, and remember that a regular, scheduled reboot once a week is a good habit for any Android smartphone.
⚠️ Warning: Do not use third-party memory cleaners, which often contain ads and consume resources themselves, making the situation worse.