Xiaomi Redmi 6 is frozen – how to restart correctly and not break your phone

Xiaomi Redmi 6 is a reliable device, but even it sometimes fails: the screen suddenly stops responding to touch, apps freeze, and buttons don't work. If your Redmi 6 freezes, don't panic: in 90% of cases, the problem can be solved without going to the service center, the main thing is to act carefully and choose the right method of rebooting depending on the symptoms.

In this article, we’ll look at all possible scenarios, from soft reboot (when the phone responds to buttons) to hard reset (if the screen is completely dead), and how to avoid data loss and what to do if the Redmi 6 doesn’t turn on after the reboot, all instructions are tailored specifically for this model with regard to its hardware features, such as a fixed battery and button location.

Before you start, check that maybe the problem is not with the freeze, but with the battery running out. Connect your phone to charge for 10 to 15 minutes β€” sometimes enough to make the screen come alive. If the charging indicator is not on, go to the methods below.

1.Soft reboot: if the screen reacts but the phone brakes

If the Xiaomi Redmi 6 is slow but still responsive to touching or pressing buttons, try a soft reboot.

  • πŸ“± Appendix "hangs" and does not close.
  • 🐒 The phone is slowing down, but the buttons are working.
  • πŸ”„ You need to update the system without losing files.

For this:

  1. Press the power button (it is located on the right end of the body) for 10-15 seconds.
  2. Wait for the menu with the options to Turn Off, Reboot and Emergency mode.
  3. Select Reboot and confirm the action.

If the menu doesn't appear, but the screen goes out, release the button and press it again for 5 seconds. The phone has to reboot automatically. This method works in 70% of cases of light getting stuck.

πŸ’‘

If the phone brakes again after rebooting, check the free space in memory. For stable operation of Redmi 6 you need at least 1-1.5 GB of free space.

Forced reset: if the screen does not respond

When the Xiaomi Redmi 6 is completely frozen β€” no touch response, no buttons working, and the screen is frozen in one image β€” a forced reset is required, a technique that simulates battery extraction but does not erase data (unless it goes into Recovery mode).

Warning: don't confuse forced reboot with factory reset! The latter will delete all your files. Here we just reboot the device.

Instructions:

  1. Press the Power button and the Volume Up button (top key on the left end).
  2. Hold them for 15-20 seconds until the screen goes out and the Xiaomi logo appears.
  3. Release the buttons and the phone will start loading normally.

If Redmi 6 freezes again, repeat the procedure, but hold the buttons for up to 30 seconds. Sometimes it takes 2-3 attempts.

Check battery power (plug it for 10 minutes) |Try another button combination (Power + Volume Down) |Leave your phone on charge for 1 hour, then try again |If the screen remains black, go to the Recovery method

-->

3.Reboot via Recovery Mode: If the phone doesn't turn on

If the Xiaomi Redmi 6 doesn't even respond to a forced reboot, you'll have to use Recovery mode. It's a service menu that allows you to reboot your device at a low level. Importantly, there's a Wipe Data option here that will delete all your data without recovery. Don't choose it unless you're planning to reset your phone!

How to get to Recovery:

  1. Turn off the phone (if it's not turned off). If it doesn't respond, remove and re-insert the battery (if it's removable) or hold the power for 30 seconds.
  2. Press Power + Volume Up and hold until the Mi logo appears.
  3. Release the buttons when you see the Recovery menu (black screen with yellow text in English).

In the Recovery menu, use the volume buttons for navigation and the Power button for selection. You need the option Reboot β†’ Reboot to System. If the phone is stuck in this menu, select Reboot and wait for the reboot.

What if there is no Reboot item in Recovery?
In some versions of Redmi 6, the Recovery menu may look different. If you don't see Reboot, select Power Off, then turn on the phone in the usual way. If that doesn't work, try connecting the phone to your PC and using the Mi Flash Tool (skills required).

4.Reboot via ADB: for advanced users

If you have access to a computer and have previously enabled USB debugging on Redmi 6, you can reboot your phone via ADB (Android Debug Bridge), which is suitable if the screen is responsive but the phone is not rebooted in the standard ways.

Procedure:

  1. Connect Redmi 6 to your PC via USB-cable (original!).
  2. Open the command line (Windows) or the terminal (macOS/Linux).
  3. Enter the command: adb devices If the phone is determined (its serial number will appear), type: adb reboot

If the team doesn’t work, try:

adb shell reboot -p

This will force the device to turn off, after which it can be turned on by the power button.

Yeah, a lot |Tryed a couple of times |No, but I want to learn |No, and I don't plan |I don't know what it's-->

5 What to do if the phone does not turn on after restarting

If after all the manipulations Xiaomi Redmi 6 is not turned on (the screen remains black, no vibration or indication), the reasons may be as follows:

Symptoms.Possible causeDecision
The screen is black, but when charging the indicator is onBattery discharged or failure in the loaderLeave on charging 1-2 hours, then try to turn on
Vibration is there, but the screen is not on.Problems with the display or plumeConnect to your TV via HDMI (if supported) or contact the service
The phone is warming up, but it won't turn on.Short-circuit or firmware failureTry flashing through the Mi Flash Tool (PC required)
The charging indicator is not on.Failed battery or power controllerCheck the cable/charging or contact the service

If the phone is not showing signs of life, try a hardware reset:

  1. Plug in the charger for 30 minutes.
  2. Press the power + Volume increase for 30 seconds.
  3. If the Mi logo appears, release the buttons.

⚠️ Warning: If the phone still doesn't turn on after these actions, don't try to disassemble it yourself - this could damage the board.

6 How to avoid hanging out in the future

To Xiaomi Redmi 6 does not hang, follow the simple recommendations:

  • 🧹 Clean the app cache regularly: go to Settings β†’ Annexes β†’ Select the application β†’ Clear the cache.
  • πŸ”„ Update the firmware: Settings β†’ The phone. β†’ Updating the system.
  • πŸ“΄ Do not install applications from unknown sources – they may contain viruses.
  • πŸ”‹ Keep an eye on the charge level: Do not allow a discharge below 10%.
  • πŸ› οΈ Use original or certified chargers.

If your phone starts to freeze after installing a new app, uninstall it and check the system, and you should also turn off the autoload of unnecessary programs:

  1. Go to Settings β†’ Battery and Performance β†’ Autostart Management.
  2. Turn off auto-start for underutilized applications.

πŸ’‘

The most common reason Redmi 6 freezes is a lack of RAM, close the background apps and avoid multitasking with heavy programs (games, video editing).

7. Frequent questions about the Xiaomi Redmi 6 freezes

Why does Redmi 6 freeze when charging?
This can be due to: a faulty cable or adapter (try the original charging); battery overheating (turn off the phone from charging for 10 minutes, then try again); a failure in the power controller (requires diagnostics in the service); if the freeze occurs only when connected to a particular outlet, check it - perhaps the problem is voltage.
Can I reboot Redmi 6 without a power button?
Yes, but it's more complicated: If the screen is responding, activate Reboot via Settings β†’ System β†’ Reboot. If the screen is not responding, connect the phone to your PC and use ADB (see section 4). In extreme cases, wait for the battery to drain completely, then plug in the charge - the phone should turn on automatically. If the Power button is broken, contact the service to replace it.
After the reboot, photos and contacts were lost. How do you recover them?
If you haven't reset to factory settings, the data should stay in place. Check: DCIM folder (photos) and Contacts (contacts) through file manager. Cloud backups: Settings β†’ Xiaomi Account β†’ Cloud. Apps like Google Photos or Mi Cloud, if they've been set up. If the data is deleted, try recovery programs like DiskDigger or Recuva (root access required).
The phone hangs on the Xiaomi logo after the reboot.
This is a sign of a firmware failure. Try: Press Power + Volume Up for 20 seconds to log in to Recovery. Select Wipe Cache Partition (does not erase data!). Reboot your phone. If it doesn't work, you'll need to flash it through the Mi Flash Tool (instructions are available on the 4PDA or XDA Developers forums).
Can I reboot Redmi 6 via SMS or call?
No, it's not provided. The only way to "remote" it is to use ADB via PCs or special service commands (e.g. ##4636## for testing), but they don't guarantee a reboot when it's completely freeze-free. If the phone responds to SMS but doesn't turn on, try sending a command message to it (e.g. via services like Tasker), but that requires pre-setting.