How to Reboot Xiaomi Redmi Note: 5 Ways to Reset Yourself

The Xiaomi Redmi Note’s suspended smartphone is a problem that almost every user faces. The reasons can range from a banal app crash to a critical system freeze after a MIUI update. Most of the time, a simple reboot helps, but what if the screen doesn’t respond to touch and the power button doesn’t work? This article covers all possible scenarios, from a standard reboot to a forced reboot via ADB or Fastboot.

We're going to look at not only the basic methods (via menus or buttons), but also the advanced ones for cases where the phone is completely "burst," and we're going to focus on the Redmi Note 10/11/12 and older series (Note 8 Pro, Note 9T), where the algorithms may differ, and if your phone doesn't respond to clicks or is stuck on the Xiaomi logo, here's the solution.

Before you start, check the battery power.Rebooting at a charge level below 15% can cause the device to completely discharge and lock down due to deep discharge protection. USB-cable (original or certified) – you will need it for methods with a PC connection.

1. Standard reboot via menu

The safest way is to use the built-in MIUI features. It is suitable if the phone responds to touch, but works unstable (hangs, brakes, overheats).

Instructions:

• 📱 Open Settings (cog icon on the main screen).
• 🔧 Go to About Phone (in older versions – About the device).
• 🔄 Press Reboot (or Reboot the system).
• ⏳ Confirm the action if a request appears.

On some firmware, the path may be different. For example, in MIUI 14 for Redmi Note 12, the reboot button is hidden in Settings → Additional → Reboot and Shut down. If you don't find a point, search by settings (the magnifier in the upper right corner).

⚠️ Warning: If the phone freezes again after the restart, it may indicate damage to system files or application conflict.

2. Forced button reset (Hard Reset)

If the screen is unresponsive and the phone is stuck on the logo or black screen, hardware reboot will help, which works even when the system is completely locked, since it addresses the bootloader directly.

For most Redmi Note models (including Note 10 Pro, Note 11S, Note 12 Pro+) the algorithm is the same:

1. 🔋 Hold the power button. + Increase the volume simultaneously.
2. ⏳ Hold for 10-15 seconds until the screen goes out and vibration starts.
3. 📱 Release the buttons when the Xiaomi logo appears.

For older models (Note 7, Note 8) you may need to hold Power + Volume Down. If it doesn't work, try a combination with both volume buttons (Power + Volume + Volume + Volume-).

⚠️ Attention: Frequent use of forced reboot can damage the file system, especially if the process is interrupted during the recording phase.

Check the battery charge (minimum 20%)

Turn off all cables (charging, headphones)

Make sure the buttons don't stick.

Remember the retention time for your model-->

3. Restart in Safe Mode (Safe Mode)

If the phone turns on but slows down or reboots spontaneously, it may be a third-party app that is to blame. Safe mode only loads system services, allowing you to detect conflict.

How to start:

• 🔄 Turn off the phone (hold power until the menu appears).
• 📛 In the off menu, press and hold the "Switch off" (or "Switch off" power) item).
• 🛡️ Confirm the transition to Safe Mode (the inscription will appear on the screen).

In this mode:

• 🚫 All third-party applications will be disabled.
• 🔍 Check the stability of the work – if the lags have disappeared, one of the installed applications is to blame.
• 🗑️ Remove suspicious programs through Settings → Annexes.
• 🔄 Reboot your phone in the usual way to get out of safe mode.

If the problem persists in safe mode, this may indicate firmware damage or hardware failure (such as memory defect), in which case Recovery is recommended.

💡

If you can’t enter Safe Mode via the menu, try the Power + Volt combination when turned on (hold until the logo appears).

4.Reboot via Recovery Mode

Recovery is a service mode that allows you to reset, clear your cache, or install an update manually.It is useful if the phone boots up to the Xiaomi logo but gets stuck further.

How to log in to Recovery:

1. 🔋 Turn off your phone (forced if you don’t respond).
2. 🔧 Keep your food on. + Volt+ before the menu (usually 5-10 seconds).
3. 📱 In the menu, select the language (swipe or volume buttons).
4. 🔄 Choose Reboot. → Reboot to System for a regular reboot.

If you need to clear the cache (helps with lags after updating):

• 🧹 Choose Wipe & Reset → Wipe Cache.
• ✅ Confirm the action and wait for the completion.
• 🔄 Reboot the phone.

⚠️ Warning: Don't choose Wipe All Data without a backup! This will delete all data, including photos, contacts and apps.

5.Reboot via ADB (for power users)

If the phone turns on but the screen doesn’t work (for example, after a fall), you can reboot it through the phone. ADB (Android Debug Bridge This method requires pre-activation of Debugging by USB developer-setting.

Instructions:

1. 🖥️ Connect your phone to your PC through USB.
2. 📂 Open the command line (Windows) or the terminal (macOS/Linux) file ADB.
3. 🔍 Enter the command to check the connection: adb devices Must appear serial number of the device.
4. 🔄 Reboot: adb reboot For forced reboot (similar to Hard Reset): adb reboot bootloader

If ADB does not see the device:

• 🔌 Check the cable and port USB (try another).
• 🔄 Reinstall Xiaomi drivers on PC.
• 📋 Make sure the debugging is done USB included (Settings) → The phone. → Version. MIUI — Press 7 times, then return to Additional → For developers).

For models with a locked bootloader (Redmi Note on MIUI Global), it may be necessary to unlock through the Mi Unlock Tool.This is the official utility from Xiaomi, but the process takes up to 72 hours (due to security policy).

💡

ADB-Reboot is the only way to “reanimate” a phone with a broken screen if debugging is done USB was included in advance.

Black Screen: What to Do If Your Phone Doesn't React

If after all the manipulations the screen remains black, and the charging indicator does not burn, hardware problems are possible:

• 🔋 Discharged battery - connect to charging at 30+ minutes, then try to reset.
• 🔌 Display plume faulty – the screen may not turn on, but the phone will vibrate when pressed.
• 🔥 Overheating or short circuit – if the phone fell or got wet before.
• 🛠️ Damaged bootloader – requires flashing through Fastboot (you need a PC and unlocked bootloader).

For diagnosis:

1. 🔌 Connect your phone to charging – if the indicator lights up, the problem is in the display or plume.
2. 📞 Call your phone from another device – if the call comes, but the screen does not turn on, the display module is to blame.
3. 💻 Connect to a PC – if the computer makes a connection sound USB, The phone is partially operational.

If you suspect a hardware breakdown, don’t try to disassemble the phone yourself – Redmi Note models often use adhesive joints and brittle plumes.

FAQ: Frequent questions about Xiaomi reboot