Introduction: When to Reset and How It Differs from Reset
Xiaomi Redmi Note 7 is one of the most popular budget devices of the brand, but even it sometimes starts to โglutโ: brake, overheat or not respond to touch. 80% of the time, the problem solves the banal reboot, but not all users know how to do it correctly. It is important to understand: soft reboot (through the menu) and hard restart (buttons) are different procedures with different consequences for the system.
In this article, we will discuss all possible ways to reboot the Redmi Note 7, including emergency methods for a โhangโ phone, as well as typical errors that can turn a routine operation into a serious problem. MIUI Different versions โ it depends on what menu items are available to you.
If your device doesn't respond to the press, don't worry: 95% of the time, it can be "reanimated" without losing data, and the key is to avoid making common mistakes, which we'll discuss below.
Method 1: Standard Reboot through the Menu
The safest and most recommended method is a soft reboot via the MIUI interface, which is suitable if the smartphone responds to touch, but works unstable (for example, brakes or overheats), this method does not affect user data and settings.
Instructions:
- ๐ฑ Unlock the screen and open Settings (cog icon).
- ๐ Scroll down and select About Phone.
- ๐ In the upper right corner, click on three dots and select Reboot.
- โ Confirm the action by pressing OK.
Alternative path (if the item is not in About phone):
- ๐ง Press the power button for 2-3 seconds.
- ๐ In the menu that appears, select Reboot (or Restart).
โ๏ธ Preparations for reset
โ ๏ธ Warning: If the phone brakes again after rebooting, check the space in the memory (Settings) โ When you fill up more than 90%, the system starts to hangยป.
Method 2: Hard button reboot (when getting stuck)
If the Redmi Note 7 is completely frozen (no touch, black screen, endless boot), a forced restart will be required, a technique that simulates battery extraction but does not reset settings, but improper execution can damage the file system.
Step-by-step:
- ๐ Hold the power button and increase volume at the same time.
- โฑ๏ธ Keep them clamped for at least 10-15 seconds (even if the screen goes out after 5 seconds).
- ๐ฑ Release the buttons when the Redmi logo appears on the screen.
If the phone doesn't respond:
- ๐ Connect it to charging for 5-10 minutes, then try again.
- ๐ Try to clamping the power. + Reduce volume (sometimes triggered by custom firmware).
What to do if the buttons donโt work?
โ ๏ธ Warning: Don't confuse a hard reboot with a Recovery login! If after holding the buttons you see a menu with items in English - it's Recovery Mode, not a reboot. โ Reboot to System.
Method 3: Reboot with Recovery Mode
If the smartphone is turned on but not loaded beyond the Mi logo, rebooting through Recovery will help, which is also useful if you want to reset the cache without losing data. Importantly, on some MIUI firmware, menu items may differ.
How to log in to Recovery:
- ๐ Turn off the phone (hold the power button 10)+ seconds).
- ๐ง Hold the power. + Increase the volume before the appearance of the Mi logo.
- ๐ฑ Release the buttons when the menu appears in English.
Further action:
- ๐ Choose Reboot. โ Reboot to System (Reboot to Normal Mode).
- ๐งน If your phone is slowing down, choose Wipe & Reset. โ Wipe Cache (cleaning the cache).
- โ ๏ธ Donโt choose Wipe Data โ itโs a complete reset!
| Item | Action. | Effects of consequences |
|---|---|---|
| Reboot to System | Reboot to OS | Safe, the data is not affected |
| Wipe Cache | Clearing the cache | It can speed up the work, the data will be saved |
| Wipe Data | Reset to factory | Deletes all data, only as a last resort. |
| Connect with MiAssistant | Connection to PC | Need to run through the Mi Flash Tool |
๐ก
If the Recovery menu is in Chinese, use the volume buttons for navigation and the power button for selection.
Method 4: Reboot via Fastboot (for experienced)
The Fastboot method is suitable if the phone does not boot even in Recovery, but responds to a PC connection.This method requires installed Xiaomi drivers and the Mi Flash Tool or ADB program.
Instructions:
- ๐ Connect your phone to the PC via USB.
- ๐ง Hold the power. + volume reduction by 10 seconds.
- ๐ฅ๏ธ On the screen will appear a hare in a hat-eared โ this is the mode Fastboot.
- ๐ Open the command line on the PC and enter:
fastboot rebootIf you need to re-flash the phone, use:
fastboot flash all [name file firmware].zipโ ๏ธ Warning: The wrong commands in Fastboot can brick your phone! If you're not sure, contact the service center. Also make sure the firmware is right for the Redmi Note 7 (codenamed lavender).
Method 5: Automatically Reboot on Schedule
Few people know, but MIUI has a built-in automatic reboot on schedule, which is useful if the phone brakes after a long run (for example, at night), the feature is available on MIUI firmware 12 and later.
How to set up:
- โ๏ธ Open the Settings. โ Additionally.
- โฐ Select Automatic Reboot.
- โ Turn on the slider and set a time (for example, 3:00 a.m).
- ๐ Choose the days of the week (recommended 1-2 times a week).
Advantages of the method:
- โฑ๏ธ It does not require manual control.
- ๐ Clears the cache and releases RAM.
- ๐ฑ Extends the โresponsivenessโ of the system.
โ ๏ธ Warning: If the phone is discharged to 0% during the scheduled reboot, the feature will not work. Also make sure that important files are not downloaded at this time (for example, application updates).
Common Mistakes and How to Avoid Them
Even a simple operation like a reboot can go wrong, and here are the most common mistakes Redmi Note 7 users make and the consequences:
- If you take out the battery (on non-disruptive models) or turn off the power during the reboot, you can damage the system files, and the phone can get stuck in the Mi logo.
- Button confusion. Power clamping + volume down leads to Fastboot, not Recovery. It's easy for a beginner to accidentally erase the data.
- Ignoring charge: Rebooting at a battery level below 5% can cause the loader to completely discharge and crash.
- Use of informal firmware: On custom ROMs (like LineageOS), standard button combinations may not work.
How to minimize the risks:
- ๐ Always check the charge level before restarting.
- ๐ Remember or write down button combinations for your model.
- ๐ง If the phone is warranty, avoid Fastboot and Recovery โ better contact the service.
๐ก
If the phone doesn't turn on for more than 5 minutes after rebooting, that's a cause for concern. Try plugging it into another charger or PC.