Xiaomi’s smartphones are known for their performance, but even flagship models like the Mi 6 can experience software failures.Rebooting the system periodically is a normal procedure that helps clear RAM and eliminate accumulated errors in the operation of applications. For Mi 6 owners, this process may be required when the interface freezes or the device needs to be completely cleaned.
There are several ways to restore the device, from a standard shutdown to a hard reset. The choice of the specific method depends on whether the touch screen responds to touch and whether the settings menu is available. In this article, we will discuss all the options for your device in detail.
Standard restart through the system menu
The safest and most correct way to restart the Xiaomi Mi 6 is to use the standard features of the MIUI operating system. This method does not pose a risk to the safety of your personal data and is recommended by the manufacturer for regular use. If the phone responds to pressing, just press and hold the power button on the side of the device.
Once the context menu appears on the screen, select the Reboot option (or Reboot).The system will request confirmation of the action to avoid accidentally turning off. Press OK, and the phone will begin the standard process of turning off and on.
💡
Before any reboot, make sure that the battery is at least 15-20% so that the device can complete the system processes.
In some versions of MIUI firmware, when you hold the power button for a long time, the voice assistant can start. In this case, you need to change the settings: go to Settings → Additional Settings → Buttons → Power button and select the action of the Off menu. Now a long press will call the desired menu.
Forced reset when getting stuck
When the screen goes out but the device doesn’t respond to touch, or when the interface freezes completely, it requires a hard reboot. For the Xiaomi Mi 6, the key combination remains classic for Android devices. You need to simultaneously press the power button and the volume button (top swing).
Hold both buttons for a while. 10-15 The screen may not be lighting up at this point, but you should feel a slight vibration. Once the device vibrates and the Mi logo appears, the buttons can be released. This method simulates the removal of the battery by forcibly cutting off the power of the motherboard.
Why can the phone freeze?
If the first time didn't work, repeat the procedure, but hold the buttons a little longer, up to 20 seconds. Sometimes the system takes longer to react, especially if the background processes have blocked the CPU core. Don't be afraid to press the buttons tightly - the Mi 6 button mechanism is designed for thousands of clicks.
☑️ Algorithm of actions when hanging
Reboot with Recovery Mode
Recovery Mode is a special diagnostic partition of the firmware, available even in critical errors of the operating system boot. To get into it on the Xiaomi Mi 6, turn off the phone completely. Then simultaneously press the power button and the volume button.
When the logo appears, release the power button, but keep the volume down until the main Recovery menu appears. Navigation is done with volume buttons (up/down), and selection is with the power button. Select Reboot and then Reboot to System for a normal reboot.
⚠️ Note: Do not select Wipe Data from the Recovery menu if your goal was simply to reboot.
Recovery is important when the touch screen is down, but the system responds to physical buttons, allowing you to restart even when the display is broken, as long as you can approximate vibration and sound signals (if they are on).
Full reset to factory settings (Hard Reset)
If a normal reboot doesn’t fix the problems, a complete reset may be required.This is a radical measure that returns the Xiaomi Mi 6 to the “out of the box” state. SIM-card and memory card, if it is installed so as not to damage their data.
Enter Recovery mode (as described above). Select a language (usually available in English and Chinese). Then select Wipe Data → Wipe All Data. The system will alert you to the irreversibility of the process. Confirm the action by selecting Confirm.
After the cleaning process is complete, which can take a few minutes, select Reboot → Reboot to System. The first run after the reset will last longer than usual, as the system creates new configuration files.
Comparison of reset methods
Different recovery methods have their own characteristics, risks and applications, and understanding the differences between them will help avoid losing important data. Below is a table comparing the main ways to reboot the Mi 6.
| Method | Data security | When to use | Risks. |
|---|---|---|---|
| System menu | 100% saved | Planned reboot, installation of updates | No. |
| Hard Reset (buttons) | 100% saved | Total freeze, sensor failure. | Minimum (file damage when power failure occurs) |
| Recovery Reboot | 100% saved | OS loading error, cyclic rebut | No. |
| Wipe Data (Reset) | All deleted. | Critical software errors, phone sales | Complete loss of photos, contacts, applications |
As you can see from the table, only the first method is suitable for daily use. The rest are emergency tools. Using Wipe Data without prior backup in the Mi Cloud or on your computer will lead to irretrievable loss of information.
Frequent problems after reboot and their solution
After the reboot, the Xiaomi Mi 6 may take some time to optimize the applications. If the phone hangs on the logo for a long time (more than 10-15 minutes), it may be damaged system partition or not enough free memory to start properly.
If you have a password too simple error or you need to enter a Mi Account after a reset, Anti-Theft protection works. You will need to enter the username and password from the Mi Account that was associated with the device before the reset. Without this data, you will not be able to unlock the phone.
Also worth checking is the status of the power button, which on older models can cause the button to stick inside the case, causing spontaneous reboots, requiring repairs at the service center.
Failure prevention and optimization
To avoid emergency reboots, keep an eye on the system. Clean the app cache regularly through the built-in Security app. Remove unused programs that may conflict with the current version of MIUI.
Do not install applications from unknown sources. Third-party launchers and system modifications often cause instability in the Mi 6. Use only proven software from the official Google Play store or GetApps.
⚠️ Note: Do not use third-party memory accelerators and cleaners. MIUI independently manage RAM more efficiently than any external utilities.
Regular firmware updates to the latest available version also improve stability, but with the Mi 6, support for official updates has already stopped, so it’s important not to experiment with custom repositories without proper preparation.