How to Reboot Xiaomi Mi TV: From Simple Reboot to Complete Reset

Xiaomi Mi TVs TV They work on Android. TV proprietary MIUI for TV, This makes them vulnerable to smart device problems like hanging ups, app errors and system failures. Rebooting is the first step of diagnosis, but not all users know how to do it correctly, especially if the screen is not responding to the remote or stuck on the logo.

In this article, we will discuss all the ways of rebooting, from soft reboot to forced reset via the service menu. Separately, we will focus on hidden button combinations for models of 2020-2026, which are not described in the official documentation of Xiaomi. If your TV does not turn on after an update or shows a black screen, here you will find a solution.

⚠️ Warning: Forced reboot through the power button on the case can damage the file system if the TV is writing data to the internal drive at this time. Use this method only when the remote and touch buttons are completely inoperable.

First, try the safest way to do this, which is to reboot software through menus, and if the TV responds to commands, it will prevent you from losing user data and settings.

1. Software reboot via the settings menu

This is the standard method that is suitable for all Xiaomi Mi models. TV, including Mi TV 4A, Mi TV 5 Pro and Redmi Smart TV. It is secure and does not affect installed apps or accounts.

To restart the TV through the menu:

1. Press the Settings button on the remote.
2. Go to the Device and Preferences section → On TV.
3. Select the Reboot option (on some models – System Restart).
4. Confirm the action by pressing OK.

⚠️ Attention: On TVs with firmware MIUI TV 3.0 and a newer path to reboot may be different: Settings → System system → Reboot. If you don't find a paragraph, update the software -- in older versions, the option is sometimes hidden.

Once confirmed, the TV will turn off and automatically turn on after 10 to 30 seconds, which helps with:

• 📱 Interface or remote hanging
• 🎮 Problems with launching applications (Netflix, YouTube)
• 🔊 Disappearance of sound when working image
• 📶 Loss of Wi-Fi or Bluetooth connection

2. Forced reboot of the power button

If your Xiaomi TV doesn’t respond to the remote or is stuck on the logo, use a physical power button.

• ⬛ On the back (models Mi) TV 4A/4S, Redmi Smart TV)
• ⬜ Side under the logo (models Mi) TV 5 Pro, Mi TV Q1/Q2)
• 🔘 On the lower frame (rarely, for example, Mi). TV 4X 55")

Instructions for forced reset:

1. Find the power button (usually it is recessed to avoid accidentally pressing).
2. Press and hold it for 10-15 seconds until the indicator goes out.
3. Release the button and wait 30 seconds.
4. Press the power button to turn on the TV.

🔹 Important: On Quick Start models, the TV may not turn off completely, but go to sleep mode. In this case, hold the button for 20-25 seconds until you hear a click of the relay (characteristic of Mi). TV 5X).

If after a forced reboot the TV turns on, but freezes again, the reason may be:

• 🛠️ Damaged firmware (requires flashing through the USB)
• 🔋 Faulty power supply (characteristic of 2018-2019 models)
• 💾 Overflowing memory (reset to factory settings needed)

3. Reboot via the service menu (for power users)

Hidden service menus allow low-level diagnostics and reboots, a method that is useful if the TV is on but not loading Android TV or constantly restart.

To enter the service menu:

1. Turn off the TV with a button on the remote.
2. Press sequentially: Menu → Input → Menu → Input (for Mi) TV 4A/4S) home → Back → Home → Back (for Mi) TV 5/Q1/Q2).
3. Hold on. OK 5 seconds until a menu with Factory Menu appears.

On the service menu:

• 🔄 Select Reboot System for a soft reboot.
• 🧹 Select Wipe Data to reset to factory settings (deletes all data!).
• 📊 Select System Info to check the firmware version and memory status.

⚠️ Note: Do not change the settings in the Panel Test sections or EEPROM — This can cause permanent damage to the matrix or motherboard, and the service menu is for diagnosis, not manual adjustment.

4. reset to factory settings (Hard Reset)

If the Xiaomi TV is constantly restarting, not turning on, or shows a "No Command" error, a complete reset may be required.

• 📺 All installed applications
• 🔐 Google and Mi accounts
• 🎛️ Custom settings for image and sound
• 📁 Local files (if you do not use an external drive)

Resetting methods:

1. Through the settings menu: Settings → Device and preferences → Reset → Reset to factory settings.
2. Through Service Menu: Log in to the instructions in Section 3 and select Wipe Data.
3. Recovery Mode: For Android models TV: Turn off the TV. Press and hold Volume.+ on the case, then briefly press the power button. Release Volume+, When the Xiaomi logo appears, select Wipe from the Recovery menu. data/factory reset using volume buttons and confirm with the power button.

🔹 Important: On Mi TVs TV Q2 2023 and a new reset via Recovery may require input PIN-Standard code is 1234 or 0000. If it does not fit, contact Xiaomi with the serial number (located on the back sticker).

💡

Before resetting, connect your TV to the internet via Ethernet, which will speed up reconfiguration and update installation after the reboot.

5.Reboot via ADB (for advanced users)

If you have experience with Android Debug Bridge (ADB), You can restart the Xiaomi Mi TV TV This is a useful method if the remote is lost and the TV is connected to the same network as the computer.

Instructions:

1. Install ADB Tools on your PC.
2. Put the debugging on. USB/Networks on TV: Go to Settings → About the TV. 7 Once you click on the build number until the notice "You're a developer" appears. → For developers and enable debugging over the network.
3. Connect to the TV on the TV. IP (You can find it in the settings. → Network: adb connect [IP_TV address]:5555
4. Reboot: Adb shell reboot For Forced Reboot: Adb shell reboot -p

If the TV doesn't respond to commands ADB, Try reconnecting:

adb kill-server


adb start-server




adb connect [IP_address

⚠️ Attention: Teams ADB They may not work on custom firmware TVs or modified bootloaders. TV 4A With firmware older than 2020, network debugging can be disabled at the kernel level.

6.Diagnosis after reboot: what to do next

After a successful reboot, check out:

• 🔄 Remote Remote (replace batteries if buttons react with a delay).
• 📶 Wi-Fi and Bluetooth Stability (Reconnect Devices).
• 🎵 Sound and image (run YouTube test video).
• 📦 Work of installed applications (update them through Google Play).

If problems persist:

• 🔄 Update the firmware: Settings → On TV. → Updating the system.
• 🧹 Clear the cache: Settings → Annexes → Select the application → Clear the cache.
• 🛠️ Check hardware components: Disable all external devices (configures, sound bars) and check ports HDMI.

🔹 Tip: If Xiaomi TV shows “No Signal” error on all inputs after reboot, reset settings HDMI-port:

1. Go to Settings. → Devices and preferences → HDMI CEC.
2. Turn off the control option. HDMI.
3. Turn off the TV, turn off the cables. HDMI, Then plug them in again.

💡

If the TV turns on after rebooting, but freezes again after 5-10 minutes, the reason is most likely overheating, USB-fan).

Frequent mistakes and their solutions

Let’s analyze the typical problems that arise when rebooting Xiaomi Mi TVs TV, and ways of eliminating them.

🔹 Important: On Mi models TV Q1/Q2 AMLogic S905 processor a frequent cause of spontaneous reboots is incompatibility of firmware with the Android version TV 11+. In this case, only a rollback to a stable version of the software will help (for example, MIUI TV 2.0.18).

7. Flashing the TV through USB (last resort)

If you want a Xiaomi Mi TV TV It's not turned on or constantly restarted, it may require manual flashing, and it's suitable for power users and requires a lot of work:

• 💻 Computer with Windows/Linux
• 🖥️ Empty. USB-flash-drive (FAT32, up to 16GB)
• 📁 Official firmware for your model (you can download it on the Xiaomi website)

Firmware instructions:

1. Download the firmware for your model (for example, mi_tv_q2_2023_v123.zip).
2. Unpack the archive and copy the update.zip file to the root of the flash drive.
3. Rename the file to mi_tv_update.zip (important for Mi models TV 5 newer).
4. Turn off the TV and insert the flash drive into the port USB 2.0 (usually marked as a Service).
5. Press and hold the Menu. + Volume+ on the body, then briefly press the power button.
6. Release the buttons when the update progress bar appears on the screen.

⚠️ Warning: Don't turn off the TV while you're firmware! It takes 5-15 minutes. If the light goes out and the screen is black, wait another 10 minutes -- maybe the app optimization is underway.

After successful firmware, the TV will restart and prompt the original setup. If the firmware fails (a red cross appears on the screen), repeat the process with another flash drive or check the integrity of the file. update.zip.

💡

Firmware through USB deletes all data, but restores performance even in cases where the TV does not respond to other methods of restarting.Always use official firmware - custom versions can lead to blocking the bootloader.

FAQ: Answers to Frequent Questions