When your smartphone suddenly stops responding to touch and refuses to turn on, it always catches you off guard, the screen may turn black, or the device may turn the MIUI logo endlessly, ignoring any control attempts, at which point most users panic, but most often the problem is solved by software methods without visiting the service center.
In this article, we will discuss in detail all possible ways of forced reboot for Xiaomi, Redmi and POCO devices. You will learn how to revive the gadget if it hangs dead, and what to do if standard methods do not help to bring the system back to life.
Before we go to radical measures, we should try the simplest and safest algorithm of actions, often the system simply goes into a deep sleep or faces a temporary conflict of processes that requires only external intervention to reset.
The method of forced reboot of the power button
The first and most effective way every owner should try is to hold the power button for a long time, and unlike a short press, this method initiates a hardware reset of the power controller, which is similar to removing the battery in older phones.
You have to hold the Power button and keep it on for a long time, and sometimes the system may not react immediately, so patience is a key factor in success here, and if the screen is gone, keep holding the button for a few seconds before the vibration or logo appears.
⚠️ Warning: If the phone is making a sound or vibrating during the long press process, but the screen remains black, try to increase the brightness or plug in the charger, as the battery may have run out of charge while getting stuck.
There are different modifications to this method depending on the specific model of your device, and some users note that simultaneously pressing the volume buttons increases the effect, especially on models with touch-sensitive control buttons.
💡
If the phone is in a case, be sure to remove it before the procedure. Thick silicone or leather cases can prevent the full press of the button, which will prevent the signal from passing on the motherboard.
Button combinations for different Xiaomi models
Xiaomi engineers have provided several options for keyboard shortcuts to enter recovery or diagnostic modes. If simple power retention didn’t help, it’s worth trying more complex combinations that work even when the display is off.
For devices with a separate power button and a volume rocker, the most effective is often a bunch of these two elements, you need to pinch them simultaneously and hold them until a specific menu or vibration appears.
- 🔘 Power + Volume up: Often used to enter Recovery mode, but on some firmware causes a forced reboot.
- 🔘 Power + Volume down: classic combination for logging into Fastboot, but with prolonged retention (15-20 seconds) may initiate a hard reset.
- 🔘 Triple pressing: On some newer models with a side-finger fingerprint scanner, a quick triple press of the lock button can unlock the device or trigger a menu. SOS, This also brings the system out of deep sleep.
It's important to understand that the response to these commands depends on the MIUI version and battery status, and if the battery is completely dead, no combination of buttons will work until you're connected to the network.
Diagnostics via Fastboot and Recovery
If the device responds to buttons but does not load normally, it can get stuck in the service menus. Getting into Fastboot mode (image of a hare repairing an android) or Recovery (black or orange menu) indicates that the hardware of the phone is good, and the problem lies in the software.
While on the Recovery menu, you can try cache clearing or a full reset, but if your goal is to just reboot your phone, choose Reboot or Reboot to System. The navigation on this menu is done with volume buttons and the power button.
| Regime. | How to get in | Resetting action |
|---|---|---|
| Fastboot | Power + Vol Down | Hold the Power 10-15 seconds |
| Recovery (Orange) | Power + Vol Up | Select Reboot -> System |
| Recovery (Black) | Power + Vol Up | Select Reboot |
Sometimes the phone can reboot cyclically, logging into these menus over and over again, in which case you must forcefully interrupt the cycle, holding the power button for 20-30 seconds until the screen is completely turned off, and then try to turn it on with a usual short press.
Why does the rabbit appear in glasses?
What to do if the phone is empty to zero
Often the reason for not turning on is a deep battery discharge, in which the charge indicator may not immediately light up, creating the illusion of failure. Lithium polymer batteries used in Xiaomi take time to raise the voltage to the minimum launch threshold.
Connect the original charger and cable. Leave the phone alone for at least 30-40 minutes, even if the screen is black. Do not try to turn on the screen or press buttons often during this period, as this may interrupt the process of "rocking" the battery.
⚠️ Note: Using unoriginal or cheap low-current chargers (less than 1A) may not be enough to start a phone with a fully discharged battery.Use a unit with 10W or higher.
If the phone is still silent after an hour of charging, try to gently move the cable in the connector. Oxidating the contacts or getting dust into the USB-C port can interfere with normal energy flow. Careful cleaning of the port with a wooden toothpick (not metal!) sometimes works wonders.
💡
Deep discharge is the most common cause of a dead phone, so let the device lie on a charge for 40 minutes before making a diagnosis of broken.
Software failures and system updates
If the phone turns on, shows the MIUI logo and shuts down again, system files may be damaged, often after a failed update or installation of superuser (Root) apps.
This may require you to flash your device through your computer using the Mi Flash Tool. However, before you resort to complex tools, try entering Recovery mode and selecting Wipe Data. Remember, this action will delete all your photos, contacts and applications.
☑️ Checklist before flashing
Automatic updates sometimes contain errors. If the problem started immediately after an air-to-air update (OTA), you should contact an authorized service center, as they can re-flash the device for free under warranty if less than a year has passed since the purchase.
Hardware problems: when you need the help of a master
Not all cases are solved by buttons. If the phone fell, went into the water or just stopped reacting abruptly for no apparent reason, maybe the problem lies in the hardware.
A battery that is blown up is not just a failure, it's a danger, and if you notice that the back of the phone is swollen or the screen is moving away from the body, you should stop trying to charge the device immediately, and you can fire the phone if you use it.
Also worth noting is the power button, which, if it fell inwards or, conversely, it falls into a back-up position and doesn't return to its original position, the power mechanism could physically collapse, and in such cases, you need to replace the button plume or the button itself in the service center environment.