How to reboot Xiaomi Redmi Note 5: from a simple reboot to a forced reset

Any Xiaomi Redmi Note 5 owner will have to reboot the device sooner or later, and the reasons can range from the banal “hang” of the interface to critical failures after a firmware update. But not everyone knows that rebooting the reboot is discord — and choosing the wrong method can exacerbate the problem.

In this article, we’ll look at all the ways Redmi Note 5 can reboot, from a standard reboot via a menu to a forced reset via a fastboot when the smartphone doesn’t respond to buttons. We’ll focus on the risks (like data loss in a hard reboot) and alternative solutions for cases where the reboot doesn’t work, and if your device is stuck on the Mi logo or doesn’t turn on at all, here you’ll find work instructions.

Important: Redmi Note 5 (codenamed whyred) has several modifications (for example, Redmi Note 5 Pro with Snapdragon 636). All of the described methods are suitable for all versions, unless otherwise indicated. For models with custom firmware (for example, LineageOS) additional steps may be required.

1. Standard reboot via menu

The safest and most recommended way is to reboot through the system menu, which is suitable if the smartphone responds to touch, but works unstable (for example, slows down or does not open applications).

How to do this:

• 📱 Press and hold the power button (located on the right end of the device) for 1-2 seconds.
• 🔄 In the menu that appears, select Reboot (or Restart in English firmware).
• ⏳ Wait 30 to 60 seconds – the device will turn off and automatically switch on again.

This method saves all the data and settings. If after the reboot problems remain (for example, applications continue to crash), try to clear the cache or reset the settings.

⚠️ Warning: If the power menu does not have Reboot, then your device has an unofficial firmware installed. In this case, use prolonged retention of the power button (10).+ seconds) for forced shutdown.

2. Forced reset (hard reboot)

If the Redmi Note 5 is completely frozen (no touch, black screen, endless boot), a forced reboot will be required, which simulates battery extraction and resets all current processes.

Instructions:

1. 🔋 Hold the power button for 10-15 seconds until the screen goes out.
2. 🛑 If the screen is still on (e.g., stuck on the Mi logo), hold the button for up to 20 seconds.
3. ⏻ After turning off, wait 10 seconds and press the power button again to turn on the device.

A hard reboot does not delete data, but it can interrupt background processes (such as downloading files or updating apps).If the smartphone freezes again after such a reboot, this may indicate:

• 🔋 Battery problems (blown, wear and tear).
• 📱 Firmware failure (especially after updating through the OTA).
• 🛠 Hardware malfunctions (for example, damage to the motherboard).

⚠️ Note: If the Redmi Note 5 does not turn on after a forced reboot (no vibration, no indicator lights), do not try to repeat the procedure repeatedly.

Try the standard rebate via the menu | Check battery power (minimum 10%)| Turn off the charger (if connected) | Wait 1 minute after switching off before re-energizing-->

3. Restart in Safe Mode

If the smartphone is turned on, but it is unstable (apps fly out, the interface slows down), the reason may lie in a conflict of programs, in which case Safe Mode, which disables all third-party applications, will help.

How to start:

• 🔄 Turn off the device (via menu or forced).
• 🔘 Hold the power button until the Mi logo appears.
• 👆 Once the logo appears, press the volume down button and hold it until the system is fully loaded.
• 🛡 In the lower left corner of the screen will appear the inscription Safe Mode.

In safe mode:

• ✅ Only system applications (e.g. Settings, Phone) work).
• ❌ All third-party programs (including launchers, antiviruses, optimizers) are disabled.
• 🔍 If the problem disappears, one of the installed applications is to blame. Uninstall suspicious programs (see section on resetting).

To get out of Safe Mode, simply restart the device in the standard way.

4.Reset to factory settings via Recovery

If the Redmi Note 5 doesn’t load beyond the logo or works with critical errors (like cyclical reboot), a reset via the Recovery menu may be required.This method deletes all data on the device, so use it only as a last resort.

Step-by-step:

1. 🔌 Turn off your smartphone (forced if you don’t respond).
2. 🔘 Press the power button. + volume-boost.
3. 🛠 Hold both buttons until the Mi Recovery menu appears (usually 5-10 seconds later).
4. 📛 In the menu, select Wipe Data (use volume buttons for navigation, power button for confirmation).
5. 🔄 Confirm the reset by choosing Wipe All Data and wait for the process to be completed.
6. 🔙 Go back to the main menu and select Reboot. → Reboot to System.

⚠️ Note: If the Recovery menu does not have Wipe Data, then the device has custom firmware installed (for example, TWRP). In this case, the reset algorithm may be different – look for Advanced Wipe or Format Data.

💡

Before resetting via Recovery, try clearing the cache (Wipe Cache item).This often solves the problems with freezing without losing data.

5.Reboot via fastboot (for power users)

If the Redmi Note 5 doesn’t boot even to Recovery, the last chance to bring it back to life is to use fastboot mode. ADB.

What you need:

• 💻 Computer with installed Xiaomi drivers and fastboot utility.
• 🔌 Cable USB Type-C (preferably original).
• 📥 Firmware for Redmi Note 5 (you can download from the official Xiaomi website).

Instructions:

1. 🔌 Turn off your smartphone and connect it to your computer.
2. 🔘 Press the power button. + The volume button will be reduced until the image of the rabbit in the hat appears (fastboot mode).
3. 🖥 On your computer, open the command line (cmd) and type: fastboot devices If the device is determined (the serial number will appear), continue. If not, check the drivers.
4. 🔄 To reboot, type: fastboot reboot For cache reset: fastboot erase cache

If the smartphone does not respond even to fastboot commands, this may indicate damage to the boot partition or hardware failure, in which case you will need a complete firmware reflash through the Mi Flash Tool.

💡

Fastboot is not the same as Recovery: In fastboot, you interact with the bootloader directly through the computer, whereas Recovery is a standalone menu on the device itself.

6. Alternative methods: when nothing works

If none of the above methods worked, consider the following options:

• 🔋 Battery problems: Connect your smartphone to charging at 30+ Sometimes a deep discharge blocks the activation.
• 🔌 Check the charger: Use the original Xiaomi power supply (5V/2A). Poor charging can cause failures.
• 🛠 Test mode: On the device turned off, press the power button + If you have a test menu, it means the hardware is good.
• 📦 Flip-through EDL: The extreme method for bricked devices requires a special cable and Mi Flash Pro.

If after all the manipulations Redmi Note 5 does not turn on:

• 🔍 Check if the red light is on when connecting to the charger (indicates a hardware malfunction).
• 📡 Try connecting the device to another computer – it may be a problem in the ports USB.
• 🛠 Contact the Xiaomi service center with a check (if the warranty is valid) or to a verified master.

FAQ: Frequent questions about the Redmi Note 5 reboot