Redmi Go smartphones running a lightweight version of Android called Go Edition are often the first gadgets for users or reliable second devices. Despite system optimization, any electronic device can eventually encounter software errors, application freezes or a complete failure of the interface to respond to touch. In such situations, the only right solution is a forced or standard system restart, which clears RAM and restarts all system processes.
Owners of budget models often find that standard control methods stop working due to a lack of RAM resources. If the screen is out but the device continues to work, or if the sensor completely ignores the pressing, it is important to know alternative ways to restore health. In this article, we will discuss in detail all possible options for restarting, from classic shutdown to the use of engineering button combinations.
Timely reboot helps not only bring the device back to life, but also extend its life by preventing the processor from overheating due to suspended background tasks. We will look at standard methods through menus, hardware combinations for emergency cases, and the procedure for a complete reset if the software failure is critical.
Staff reboot through the settings menu
The safest and most recommended method of restoring normal operation is the use of an embedded program menu. If the touch screen of your Xiaomi Redmi Go responds to touch, but the system is slow or some applications do not open, you need to use a standard algorithm, which ensures the correct completion of all processes and the safety of user data.
To start, unlock your device and find the Settings icon on your desktop or app menu, which usually looks like a gear. Inside the menu, scroll down to System or About Phone, where the main control functions are located, and that's where the key power switch is.
- 📱 Press and hold the switch on the side of the body during 1-2 seconds before the menu.
- 🔄 Select on the screen the option “Switch off” or “Reboot” (if available).
- ⏳ Confirm the action in the pop-up window by touching the appropriate button.
- ⚡ Wait for the screen to be completely turned off and the Redmi logo to reappear.
In some versions of the MIUI Go shell, pressing the power button for a long time may not trigger a menu, but immediately activate Google's voice assistant. If this happens, do not panic. You will need to change the button settings in the Advanced Settings section or simply use the software switch off button on the screen, which duplicates the physical key.
💡
If the off button on the screen doesn't respond, try turning off the phone first, wait 10 seconds, and then turn it on again, which will provide a deeper cache cleanup.
Reset buttons (Hard Reset Power)
When Android Go's interface freezes completely and no longer responds to any touch, a more radical approach is needed, in which case the software menu is not available, and the only way to affect the device is by using a hardware keyboard combination, which simulates battery extraction by forcibly interrupting the power supply to the motherboard.
Forcing a forced reboot on the Redmi Go 1 and Go 2, you need to find a Power button, which is on the right side of the device on most models, and unlike a regular shutdown, it requires a long, not short, impact.
⚠️ Note: Do not use this method regularly. Forced shutdown can damage the file system if the system was recording important data at the time of the failure.
Press the power button and hold it for 10 to 20 seconds. The screen may go out, then light up again, after which the device will begin to vibrate. It is important not to release the button until the manufacturer logo appears. If the first time the smartphone does not respond, try repeating the procedure with a slightly different force of pressing.
Sometimes a successful launch requires a combination of buttons. If single power retention doesn't work, press the Volume Down and Power buttons simultaneously. Hold them for about 15 seconds. This combination is often used to enter recovery mode, but with a certain timing can cause a hard restart of the system.
Reboot with Recovery Mode
If standard methods don't work and the device goes into infinite boot or bootloop, you need to use Recovery Mode Recovery Mode, a special diagnostic interface that is sewn into the phone's memory regardless of the main operating system, logged in before Android boots.
To enter recovery mode on Xiaomi Redmi Go, do the following: turn off the device completely (if it is on). Then simultaneously press the Volume Up button and the Power button. Hold both keys until the Mi logo appears, then release the power button, but continue to hold Volume Up.
☑️ Entrance to Recovery Mode
When a menu with a few items in English appears on the screen, the sensor control will not work. Navigation is done with volume buttons (up/down), and selection is done with a short press of the power button. You need to find Reboot or Reboot system now.
| Action. | Navigation button | Confirmation button |
|---|---|---|
| Move upwards | Volume Up. | - |
| Moving down | Loudness Down | - |
| Choice of menu item | - | Meals (short) |
| A no-action exit | - | Select Reboot |
Once the reset point is selected, the device will start the standard on-line procedure, which is especially useful when a software failure blocks the touchscreen, but the system itself is intact, and if this method does not help, the problem can go deeper.
Full reset to factory settings (Hard Reset)
When the Redmi Go phone doesn't just freeze, it doesn't work properly even after you've rebooted, or if you've forgotten the pattern lock, you may need to reset completely, which deletes all user data, returning the device to a "store-like" state, which permanently deletes photos, contacts and apps without the possibility of recovery.
To reset, you need to re-enter the Recovery menu (as described in the previous section). From the list of options, select Wipe data or Wipe & Reset. The system will ask you to confirm the action, as this is a critical operation. Select Wipe All Data and confirm the choice.
⚠️ Warning: Make sure the battery level is at least 40-50%. If the phone turns off during data erasure, this can lead to complete inoperability of the device.
The formatting process can take anywhere from 5 to 15 minutes. The progress bar will be displayed on the screen. Once completed, you will see the message "Data wiped successfully." Select Reboot to run a clean system. The first download after a reset always takes longer than usual.
Factory Reset is effective in combating virus software and deep registry errors, but if the freeze problem returns after reset, it indicates a physical malfunction of smartphone components such as flash memory or plumes.
What to do if you forget your Google account after you reset?
Rebooting with a discharged battery
Often users confuse software failure with deep battery discharge. If the Redmi Go screen is black and does not respond to the power button, it may be that the battery has dropped below the critical level necessary to start the processor.
Connect the original charger and cable. Pay attention to the charge indicator: if it catches fire red or flashes, leave the phone to charge for at least 30-40 minutes without trying to turn on. Lithium-ion batteries in budget models may take time to set the starting voltage.
- 🔌 Use only a serviceable cable and power supply with a current of at least 1A.
- 🕰️ Don’t try to turn your phone on in the first 10 minutes of charging.
- 🌡️ Make sure the device is not overheated; at high temperatures, charging may be blocked.
If after an hour of charging, the Xiaomi phone still does not show signs of life, try to wake it up by connecting it to the phone. USB-Sometimes the current from the PC stabilizes the power controller, and you can try to press the power button while you're charging.
💡
The lack of a charging response most often indicates a malfunction of the Micro-USB connector or power controller, rather than battery discharge.
Typical problems and their solution
Owners of Redmi Go 1 and newer versions may encounter specific freeze scenarios, such as a phone that can restart in a bootloop after installing an update or a heavy app, in which case it helps to log into safe mode.
To enter Safe Mode, start the normal reboot. When the Android or Redmi logo appears, quickly press and hold the Volume Down button. The device will boot with the "Safe Mode" tag in the corner of the screen, and only system applications are running in this mode, allowing you to remove the culprit.
If the phone is warming up and slowing down, check for internal memory. Go Edition requires free space for temporary files. Cleaning the app cache through settings can temporarily make the processor work easier and prevent freezes.
⚠️ Warning: If the phone is warming up in the camera or processor area even when it's off when charging is connected, immediately disconnect it from the network.
In the case when none of the software methods helps, and the device behaves chaotic (it turns on, vibrates for no reason), it is likely that you need to flash through the computer using the Mi Flash Tool utility or replace hardware components in the service center.