How to reboot Xiaomi Poco X3: all the ways from soft reboot to emergency reset

Xiaomi Poco X3 is a popular smartphone with powerful hardware and customized MIUI firmware, but even it sometimes “hangs” or requires a reboot. The reasons are different, from bugs in applications to critical system errors. In this article, we will analyze all possible ways to reboot, from a standard restart to forced reset through the engineering menu.

It is important to understand that forced reboot on the Poco X3 with the help of buttons does not reset settings, but can interrupt background processes, including system updates. If the phone does not respond to touch or freezes on the POCO logo, do not panic - in 90% of cases the problem is solved without a service center.

We’ll look at the different scenarios: when the screen is running, when the smartphone is completely dead, and the rare cases that require a PC connection. All the instructions have been tested on the Poco X3 NFC (surya model) and Poco X3 Pro (vayu), but will also be suitable for other MIUI 12-14 devices.

1. Standard reboot via menu

The safest way is to use the built-in settings, which is suitable if the smartphone responds to touch, but is unstable (for example, braking or overheating).

To restart Poco X3 via the menu:

1. Press and hold the power button (right) until the menu appears.
2. Slip the Reboot icon** (or Restart if English).

The smartphone will turn off and on automatically in 20-30 seconds, which saves all the data and does not affect the installed applications.

💡

If the power button doesn't work, try calling the menu through Settings → About Phone → Reboot. On some firmware, this path is available even when the screen is locked.

2. Forced button reset (Hard Reset)

If the Poco X3 is stuck on the logo, doesn't respond to touch or the screen is black, but the phone vibrates when charging is connected, hardware reboot will help. It simulates battery extraction (although the Poco X3 battery is non-removable).

Instructions:

1. Press the power button and increase the volume at the same time.
2. Hold them for 10-15 seconds until the screen goes out and the phone vibrates.
3. Release the buttons and the device will start loading automatically.

This method does not delete data, but it can interrupt background processes (such as downloading files or updating applications).If problems persist after rebooting, try the following method.

3.Reboot to Recovery Mode

Recovery Mode is an engineering menu that allows you to reset, flash your device, or clear your cache, and you need to run a special combination of buttons to get into it.

Step-by-step:

1. Turn off your smartphone (if it is turned on, use the method in Section 2).
2. Press the power button and increase the volume.
3. Hold them until the MI logo and menu appear in English.
4. Use volume buttons for navigation and power button to select the item.

The Recovery menu has options:

• 🔄 Reboot - a normal reboot.
• 🧹 Wipe Data – reset to factory settings (deletes all data!).
• 📦 Apply update – installing firmware with SD-map.
• 🔧 Advanced – additional settings (cleaning the cache, checking the integrity of the system).

Select Reboot| Do not confirm Wipe Data without the need | Use volume buttons for navigation | Wait 3-5 minutes at the first boot after reset-->

⚠️ Note: Wipe Data completely deletes all files, photos and applications. If you did not back up, it will be impossible to restore data.

4.Reboot via Fastboot Mode

Fastboot is a mode for firmware and diagnostics of a device via PC. It is useful if the Poco X3 does not load even in Recovery, but reacts to the connection to the computer.

How to log in to Fastboot:

1. Turn off your phone (if necessary).
2. Press the power button and reduce the volume.
3. Hold on until the image of a rabbit in a fastboot mode appears.

In this mode, you can:

• 🔄 Reboot your phone with the fastboot reboot command.
• 📥 Sweat official or custom firmware.
• 🔧 Unlock the boot loader (required for installation) TWRP magisk).

⚠️ Attention: The wrong commands in Fastboot can turn your smartphone into a brick.If you are not sure about your actions, you should contact the service center.

Once a week |Only when it hangs |Never |I don't know what it-->

5.Reboot via ADB (for advanced users)

Android Debug Bridge (ADB) — A tool for debugging and controlling a smartphone via a PC, which is useful if the screen does not respond, but USB-debugging was included earlier.

What you need:

• 🖥️ A computer with installed Xiaomi drivers and ADB.
• 🔌 USB-cable (preferably original).
• 📱 Included option Debugging by USB developer-setting.

Instructions:

1. Connect Poco X3 to your PC.
2. Open the command line (cmd) and enter:

adb devices

If the device is determined, execute the reboot command:

adb reboot

For forced reboot (similar to holding the power button):

adb shell reboot -p

If the Poco X3 does not respond but is detected in fastboot, use:

fastboot reboot

💡

ADB only works if USB debugging has been enabled before the phone freezes. If the option is disabled, this method won't help.

6. What should I do if nothing helps?

If the Xiaomi Poco X3 does not respond to any combination of buttons, is not charged or detected by a computer, there may be hardware problems:

• 🔋 Battery malfunction (blown, deep discharge).
• 🔌 Damage to the charging connector or power controller.
• 🛠️ Short circuit on the motherboard.

In such cases, self-repair can aggravate the problem. Contact an authorized Xiaomi service center or a proven workshop. The average cost of diagnosis is from 500 to 1500 rubles.

Before the service visit:

• 📋 Write it down. IMEI phone (on a box or under a battery).
• 🔄 Try charging your phone with another cable and power supply.
• 📸 Take a picture of the serial number (on a box or in a check).

💡

If the phone doesn't turn on after falling or getting moisture, DO NOT plug it into charging! This can cause a short circuit. It's better to carry it to the service right away.

Comparison of reset methods

FAQ: Frequent questions about the Poco X3 reboot