Xiaomi smartphone does not turn on: how to restart the got stuck device (7 working methods)

Your Xiaomi has stopped responding to taps, the screen is black and the charging indicator is not on? The situation is familiar to many owners of smartphones of the brand, from the budget Redmi Note to the flagship Mi 13. The reasons can be different from a software failure after the MIUI update to hardware problems with the battery or motherboard, but in 80% of cases the device manages to “resuscitate” without going to the service center.

In this article, we have 7 proven ways to reboot Xiaomi when it is not turned on, and we will analyze both “soft” methods (for example, forced reboot through a combination of buttons) and “hard” ones (entering Fastboot mode or resetting via Recovery). Particular attention will be paid to models with a non-removable battery (for example, POCO F5 or Redmi K60), where the standard "take out the battery" tips don't work, and you'll also learn how to tell the difference between a freeze and a breakdown and when it's time to carry your phone for repair.

1. Forced reboot: button combination for all Xiaomi models

The easiest and safest way to wake up a smartphone is a hardware reset, which works even with a fully black screen if the reason is the system freezes. The method is universal for all Xiaomi devices, including Redmi, POCO and Mi, but there are nuances for models with a Bixby button (for example, Mi Mix 3).

You'll need:

• ✋ Power button – usually located on the right.
• 🔽 Volume Down button – on the left side.
• ⏳ Patience: Hold the buttons for at least 10-15 seconds (on some models – up to 30 seconds).

Instructions:

1. Connect your smartphone to charging (preferably the original Xiaomi adapter for 18-33 watts).
2. You can also use Power + Volume Down.
3. Hold on until you feel the vibration or the Mi/Redmi logo appears.
4. Release the buttons – the phone should start loading in normal mode.

⚠️ Warning: If the phone turns on after a forced reboot but immediately shuts down or reboots cyclically, this is a sign of a damaged firmware or faulty battery, in which case a Recovery reset will be required (see Section 4).

2. Charging Check: Why Xiaomi doesn't turn on even after a reboot

Often users confuse freeze with full discharge. If the smartphone does not respond to buttons and shows no signs of life, the first task is to make sure that it is actually charging. Especially important for models with fast charging (Redmi Note 12 Pro+, POCO F4 GT), where the power controller can block the current if the malfunction.

How to check:

• 🔌 Connect the original cable and power supply (do not use cheap analogues!).
• 🕒 Leave your phone charging for at least 30 minutes – even if the indicator doesn’t burn.
• 🔦 Light the flashlight on the screen at an angle: sometimes the image is, but the backlight is turned off.
• 🔊 Listen: When connecting the charging should be a notification sound (if the speakers are serviceable).

⚠️ Warning: If after 2-3 hours of charging the phone remains cold (does not heat at all), this may indicate a break in the power chain or a malfunction of the motherboard.

3.Fastboot Mode: How to Reboot Xiaomi via PC

If the standard reboot didn’t work, the next step is to log in to Fastboot mode.This is a service mode that allows you to reflash your phone or reset your settings through your computer.The method is suitable for all Xiaomi models, but requires installing drivers and the Mi Flash Tool program (for Windows).

What you need:

• 🖥️ Windows computer 7/10/11 (MacOS will require a virtual machine).
• 🔌 Original. USB-cable (better from the set).
• 📥 Mi Flash Tool (official website).
• 🔧 Qualcomm or Mediatek drivers (depending on your smartphone’s processor).

Step-by-step:

1. Turn off your phone (if it's stuck, hold the Power + Volume Up for 20 seconds).
2. Press Power + Volume Down and connect the cable to your PC.
3. Release the buttons when a hare in a hat-eared hat appears on the screen (Fastboot logo).
4. Start the Mi Flash Tool, select Clean All mode.
5. Press Refresh – the program must detect the device.
6. Select firmware for your model (download in advance from xiaomifirmwareupdater.com) and click Flash.

⚠️ Note: Fastboot Flashing removes all data from your phone, including photos and apps. If your smartphone has been enabled to sync with Mi Account, some of the data (contacts, notes) can be restored after you log in to your account.

4.Recovery Reset: When Xiaomi is powered on but not loaded

If the phone vibrates or shows the Mi logo but does not load further, the problem may be in the damaged system files, in which case the reset via Recovery Mode - built-in recovery menu - will help.The method works on all Xiaomi smartphones, including the old models (Redmi 4X, Mi A1) and new (POCO X5 Pro, Redmi Note 12).

How to log in to Recovery:

1. Turn off your phone (if it is suspended).
2. Hold the Power + Volume Up and hold it for 10-15 seconds.
3. When the Android robot menu appears, release the buttons.
4. Use volume buttons for navigation and Power for selection.

Action in Recovery:

• 🔄 Reboot system now is a regular reboot (try this first).
• 🧹 Wipe data/factory Reset – complete reset (deletes all data!).
• 📦 Wipe cache partition – Cache cleanup (safe for data).
• 🔧 Advanced → Wipe Dalvik Cache – Cleaning Dalvik cache (helps with hanging after updating).

💡

If the Recovery menu is in Chinese, select the "Data Cleanup" or "Reboot" option.

⚠️ Note: On some models (Redmi) K50, POCO F4) After resetting via Recovery, you may need to enter your username and password from Mi Account if you previously activated the Device Protection feature. Without this data, the phone will become a brick.

5 Hardware Methods: What to Do If Xiaomi Doesn't React at All

If none of the software methods worked, the problem could be the hardware.

The only safe hardware method you can try at home is battery reconnection, which is true for removable back-lid models (Redmi 3S, Redmi 4A, Mi Max):

1. Remove the cover (use a plastic spatula or mediator).
2. Turn off the battery plume for 30 seconds.
3. Connect back and try to turn on the phone.

⚠️ Note: On models with a non-removable battery (POCO X3 Pro, Redmi Note 11) self-opening the case will lead to loss of warranty and risk of damage to the plumes.

6.When it’s time to bring Xiaomi to the service: 5 signs of a serious breakdown

Not all problems can be solved at home, but here are 5 signs that your phone needs a professional diagnosis:

• 🔥 The phone heats up even without charging (the risk of battery fire!).
• 💧 On the screen appeared divorces or vertical stripes (damage to the matrix).
• 🔌 Charging is only in a certain position of the cable (faulty connector). USB-C).
• 🔊 Phone beeps or cracks when turned on (motherboard problems).
• 🔄 After resetting via Recovery requires a Mi Account you don't have.

The cost of repair in official Xiaomi services (in Moscow, 2026):

• Battery replacement: 2,500–5,000 ₽ (model-wise).
• Repair of the charging connector: 1,800–3,500 ₽.
• Display replacement: 4,000–12,000 ₽.
• Diagnosis of the motherboard: 1,500 ₽ (plus the cost of repair).

💡

If your Xiaomi is on warranty (usually 12 months), don't try to repair it yourself! opening the case or flashing through the Fastboot will void the warranty obligations.

7.Prevention: How to Avoid Xiaomi Hangouts in the Future

To your Xiaomi smartphone does not “go out of control”, follow these rules:

• 🔋 Do not allow the battery to completely discharge (charge at 15-20%).
• 📱 Clean the cache regularly through Settings → Memory. → Cleanup.
• 🔄 Update. MIUI Only through official channels (do not use custom firmware!).
• 🛡️ Install a reliable antivirus (e.g. Avast or Bitdefender).
• 🌡️ Avoid overheating (do not play heavy games when charging).

It is also useful to enable automatic optimization:

1. Go to Settings → Special Opportunities → System Optimization.
2. Activate Memory Cleanup and Charging Optimization options.
3. Turn on overheating protection (if available in your model).

⚠️ Note: If you use custom Recovery (for example, TWRP), If you don't install informal Magisk or Xposed modules, they often cause a "brick" (turning your phone into a "brick»).

FAQ: Frequent questions about Xiaomi reboot