How to open a smartphone Xiaomi Redmi 7A: unlock password, pattern lock and MI-account

Forgot the password from Xiaomi Redmi 7A Or did the phone lock down after failed input attempts? The situation is familiar to many - the smartphone turns into a "brick" and access to photos, contacts and messages is lost. 7A You can even do it without any special skills. In this article, we'll go through all the working methods, from standard reset via Recovery to bypassing lockdown. MI-Account with the official tools of Xiaomi.

It's important to understand that not all ways will save your data. For example, hard reset will remove all information from the device, including apps, settings and files in internal memory. But unlocking through ADB or Mi Unlock Tool in some cases allows you to do without loss. Choose the method based on your situation - and remember to back up!

If you've never faced unlocking smartphones, don't panic.Redmi 7A It is based on the Qualcomm Snapdragon 439 processor, which simplifies the work with Fastboot and the Fastboot. EDL-The key is to follow the instructions and not miss the steps, and if you are afraid of ruining something, contact the Xiaomi service center (but be prepared to show a check or confirmation of purchase).

1. Unlock via Recovery (reset to factory settings)

The simplest and most versatile method is hard resetting through the Recovery menu, which is suitable if you have forgotten your password, pattern lock or key. PIN-code, but did not link the device to MI-The downside is the total loss of data on the phone.

To log in to Recovery on Redmi 7A:

1. Turn off the phone with a long press of the power button.
2. Press Volume Up + Power at the same time and hold for 10-15 seconds until the Mi logo appears.
3. Release the buttons and you will see the Recovery menu (may be in Chinese or English).

Then you go ahead and do this.

• 🔧 Use volume buttons for navigation and power button for selection.
• 📱 Select the Wipe Data option (or in Chinese).
• 🔄 Confirm the reset by selecting Wipe All Data (or similar item).
• 🔙 Once complete, go back to the main menu and select Reboot to reboot.

⚠️ Note: If after resetting the phone requires the input of data MI-If you've linked an account before, this method won't help. №3 or №4.

Is the phone off?

Is the battery at least 30% charged?

Is there a backup of important data?

Are you ready to lose all files on your device?

-->

2 Unlocking through ADB (without data loss)

If the Redmi 7A has USB debugging enabled and the phone is recognized by the computer, you can try to delete the file with the password via ADB. This is the only way to unlock without reset, but it only works if two conditions are met:

1. The phone previously activated the option debugging via USB (Settings → About Phone → MIUI version → 7 times tap on version → return to Additional → For developers).
2. The computer was already connected to the phone and had ADB rights (there was a confirmation of a trusted device).

Instructions for Windows:

1. Download and install Google’s Platform Tools (or Minimal ADB and Fastboot).
2. Get Redmi on board. 7A PC-only USB-cable (original!).
3. Open the command line (Win + R → enter cmd) and execute commands in order: adb devices (must display your phone) adb shell rm /data/system/gesture.key rm /data/system/password.key rm /data/system/locksettings.db rm /data/system/locksettings.db-wal rm /data/system/locksettings.db-shm
4. Reboot your phone: adb reboot

After the reboot, the lock should disappear. If not, try repeating commands or moving on to other methods.

⚠️ Attention: On some firmware MIUI Lock files can be stored in other folders. If the commands don't work, try deleting the files. /data/system/lock_pattern.key or /data/system/lockscreen.password.

💡

If ADB Does not see the device, try reinstalling Qualcomm drivers or using another USB-Xiaomi’s original cables often run more stable than cheap ones.

Bypassing the lockdown MI-account

If after the Redmi reset 7A requires input MI-The official way to unlock an account you don't remember is to use the Mi Unlock Tool:

• 📅 The account has not been deleted or blocked.
• 📱 Your phone is linked to your number or email.
• 🔗 You have access to the mail or SMS confirm.

Step-by-step:

1. Download Mi Unlock Tool from the official website (only for Windows!).
2. Unpack the archive and launch it. miflash_unlock.exe on behalf of the administrator.
3. Come in yours. MI-Account via tool (use the same data as on your phone).
4. Connect Redmi 7A in Fastboot mode: Turn off the phone. Press Volume down + Power until the hare appears in the eardress cap.

Mi Unlock Tool

Unlock

If the tool is running a "Couldn't unlock" or "Device not supported" error, it means:

• 🔒 The account is not tied to this device.
• 🕒 Less than 72 hours have passed since the last account link (Xiaomi restriction).
• 📵 The phone is not supported by the tool (rarely, but it happens on old firmware).

4 Unlocking via Fastboot (firmware without a MI-account)

If the Mi Unlock Tool doesn’t help, the phone is locked. MI-You can try flashing clean firmware through Fastboot, which deletes all the data, but bypasses the locking:

• 🖥️ Windows computer.
• 🔌 Original. USB-cable.
• 📦 Fastboot firmware ROM for Redmi 7A (download from the official website).
• 🛠️ The Mi Flash Tool.

Instructions:

1. Unpack the downloaded firmware in a folder without Cyrillic characters (for example, C:\Redmi7A_fastboot).
2. Install the Mi Flash Tool and run on behalf of the administrator.
3. Connect Redmi 7A in Fastboot mode (clip Volume Down + Power).
4. In the Mi Flash Tool, click Select and specify the path to the firmware folder.
5. Select Clean All mode and press Flash.
6. Wait for the finish (5-10 minutes) and restart the phone.

After the firmware through Fastboot, the phone will be like new – without locking. MI-This method is suitable if other methods have not worked or you are ready for a complete cleanup.

5. Unlocking through EDL (for power users)

EDL (Emergency Download Mode) is a firmware emergency mode that allows you to restore your phone even if it doesn't turn on.

• 🔧 Knowledge of working with Qualcomm devices.
• 💻 Special software (QFil or Mi Flash Pro).
• 🔐 Access to an authorized Xiaomi account (for new devices).

If you are not sure of your abilities, do not use this method - an error can lead to a complete failure of the phone ("bricking"). For the Redmi 7A, the process looks like this:

1. Download firmware in.mbn format for EDL (for example, from the 4PDA forum).
2. Install the Qualcomm 9008 drivers.
3. Connect your phone to your PC by holding the Volume Up + Volume Down + Power button (or via Testpoint).
4. In QFil, download the firmware and press Download.

⚠️ Note: Since 2021, Xiaomi has been blocking unofficial firmware through the EDL It's on new devices. 7A (2019) This method may still work, but requires authorization in Mi Account with developer rights.

6. What should I do if nothing helps?

If all of these methods fail, you have three options:

• 📞 Contact the official service center Xiaomi with documents on the phone (check, warranty card). IMEI.
• 💰 Buy an unlock code on specialized sites (for example, DC-Unlocker). The cost is from 500 to 2000 rubles, but there is a risk of running into scammers.
• 🔨 I can also use the phone through myself. EDL risk of losing the guarantee (see section 5).

If your phone is locked because of theft or loss, don't try to unlock it, it's illegal. IMEI device.

💡

Before unlocking, check if the phone is tied to the MI-If you are attached, try the official methods first (Mi Unlock Tool or service center).

7.How to avoid blocking in the future

To avoid the problem again, follow the following simple rules:

• 🔐 Use a fingerprint or facial recognition in addition to a password.
• 📝 Write passwords to a trusted manager (e.g. Google Password Manager or KeePass).
• ☁️ Regularly back up through Settings → Additionally. → Backup.
• 🔗 Don't delete. MI-Your phone account, if you plan to sell it, do a reset first.

It’s also helpful to activate the developer’s settings and enable USB debugging in advance – this will help unlock your phone through ADB if you forget your password.

If you often forget passwords, set up a Smart Lock in MIUI:

1. Go to Settings → Screen Lock → Smart Lock.
2. Add secure places (such as your home or work) where your phone will unlock automatically.
3. Set up trusted devices (such as smartwatches or headphones).

FAQ: Frequent questions about unlocking Redmi 7A