How to exit Fastboot mode on Xiaomi Redmi Note: working methods

The Fastboot mode on Xiaomi Redmi Note smartphones is an engineering tool for firmware, unlocking the bootloader or restoring the system. However, many users face a situation where the device “stuck” on the screen with a rabbit in a hat and the inscription FASTBOOT. The reasons are diverse: from accidental button pressing to failure when updating the software. The main thing is not to panic: in 95% of cases, the problem is solved without going to the service center.

In this article, we will discuss 5 proven ways to turn off Fastboot mode on Redmi Note 4/5/6/7/8/9/10/11/12, including models with Pro, Pro+ and Lite suffixes. Special attention will be paid to the method of forced reboot through hardware buttons - it works even when completely dead firmware when the smartphone does not respond to the connection to the PC.

Why Redmi Note is loaded into Fastboot: the main reasons

Before we get to the bottom of this problem, it's important to understand the root of it, because Fastboot is not randomly activated, it's a system response to certain actions or failures. Here are the most common scenarios:

• 🔄 Interrupted Software Update: If, during installation, the update is MIUI Updater or Recovery error occurred (battery is dead, power is off), the system can automatically go to Fastboot for recovery.
• 🔧 Failed firmware: Attempting to install custom software (e.g. via TWRP) or official firmware with errors often leads to "hang" in the Fastboot.
• 🔑 Unlock bootloader. After the command fastboot oem unlock, some Redmi Note models require confirmation through Mi Account, but instead go into a cyclical reboot.
• 🎯 Accidental button pressing, simultaneous keystroke Powering + Loudness down when turned on is the standard combination for logging into a Fastboot. Often this happens when you take your phone out of your pocket.
• 🔋 If the battery is depleted to 0% while running in the background, after charging, the device can start in Fastboot instead of a normal boot.

Fun fact: On the Redmi Note 8 Pro and later, Fastboot mode can be activated when you connect to a PC with the Mi Flash Tool installed, even if you didn’t plan to flash the device.This is due to the automatic detection of Qualcomm HS-USB QDLoader 9008 drivers that intercept boot control.

⚠️ Attention! If you installed custom software before you hit Fastboot (like LineageOS or Pixel Experience), standard exit methods may not work. EDL-mode (emergency loading).

Method 1: Forced reboot through hardware buttons

The most versatile method that works on all Redmi Note models, including the Redmi Note 12 Pro+ 5G and Redmi Note 10S. Its advantage is that it does not require a computer connection or charger.

1. Make sure that the smartphone is not connected to USB-cable.
2. Press the Power button and hold it for 15-20 seconds.
3. If the screen is gone, but after 2-3 seconds the Fastboot logo appears again, repeat step 2, but now hold the button for 30 seconds.
4. After a complete shutdown, wait 10 seconds and press Power once for a normal boot.

Some models (such as the Redmi Note 7 and Redmi Note 9 Pro) may require a combination of buttons:

• 🔋 Nutrition + Loudness up – hold 10-15 seconds.
• 🔄 Nutrition + Loudness up + Loudness down (at the same time) – for “hard” reset.

The screen is out and not on 5+ seconds|After the inclusion, the logo appeared MI (not Fastboot)|The device vibrates when you press the buttons|The system is loaded longer than usual (normally)-->

If after these manipulations, the smartphone loads again in the Fastboot, the problem lies deeper - perhaps the firmware or boot partition is damaged.

Updates MIUI|Custom firmware installations|Unlock the loader|Accidental button pressing|Other causes-->

Method 2: Exit through the Mi Flash Tool (official method)

If the forced reboot did not help, you will need to connect to a PC and use the Xiaomi Mi Flash Tool. This method is suitable for devices with an unlocked bootloader or if you have previously flashed a smartphone through Fastboot.

1. Download and install the Mi Flash Tool (version no lower than 2023.4.1).
2. Connect Redmi Note to PC via Original USB-cable (it is desirable to use the port) USB 2.0 on the back of the system unit).
3. Run MiFlash.exe on behalf of the administrator.
4. In the program, click Select and select the folder with the official firmware for your model (you can download xiaomifirmwareupdater.com).
5. Press Refresh – your smartphone should appear in the list of devices (for example, COM3 – Qualcomm HS-USB...).
6. Select firmware mode: 🔄 Clean all – deletes all data, but saves the bootloader unlock. 🔧 Clean all and lock – a full reset with a bootloader lock (requires authorization in Mi Account). 📱 Save user data – attempts to save user files (not always working).

Flash

After successful firmware, the smartphone will automatically restart to normal mode. anti_rollback, So you're trying to install an older version. MIUI, In this case, download the latest stable firmware for your model.

⚠️ If after firmware through the Mi Flash Tool smartphone requires a password from Mi Account, but you do not remember it, you can restore access only through the official website account.xiaomi.com. Using blocking bypass tools (e.g. Mi Account Unlock Tool) can result in a total loss of warranty and lockdown. IMEI.

Method 3: ADB and Fastboot commands (for advanced users)

If you have experience with ADB (Android Debug Bridge), you can try to exit Fastboot using the command line. This method is suitable for devices with an unlocked bootloader and drivers installed.

1. Download and unpack Platform Tools (ADB/Fastboot package from Google).
2. Connect Redmi Note to your PC and open the command line (Win + R → enter cmd).
3. Go to the folder from platform-tools: cd C:\platform-tools
4. Check if the device is determined: fastboot devices must have a serial number (e.g., 1234abcd fastboot).
5. Run the reboot command: fastboot reboot If it didn't work, try: fastboot continue

For devices with a locked bootloader, the cache reset command can help:

fastboot erase cache

If after these commands the smartphone returns to Fastboot again, try flashing the boot section (boot.img) from the official firmware:

fastboot flash boot boot.img


fastboot reboot

💡

Before use ADB-Disable the antivirus – some programs (such as Avast or Kaspersky) block fastboot.exe as a “suspicious file».

Method 4: Recovery through Recovery Mode

If the smartphone loads into Fastboot, but the Recovery partition is not damaged, you can try resetting the settings or install the update manually.

1. Turn off the device (hold power for 20 seconds).
2. Hold the combination: 🔧 For the Redmi Note 4/5/6/7/8/9: Nutrition + Loudness up. 🔄 For the Redmi Note 10/11/12: Nutrition + Loudness up (hold until the logo appears) MI).

Wipe Data

Wipe All Data

Reboot

Reboot to System

If Recovery does not have a reset option (for example, on custom firmware), try installing an official update:

1. Download the firmware for your model (.zip format) to the memory card.
2. In Recovery, select Install update.zip to System.
3. Specify the path to the file and confirm the installation.

⚠️ Attention! On some Redmi Note models (such as the Note 8 Pro with Mediatek), the Recovery menu may be missing or blocked. SP Flash Tool (for Mediatek) or a return to the method with the Mi Flash Tool.

Method 5: Emergency firmware via EDL (for “bricks”)

If all previous methods failed, your Redmi Note has become a so-called “brick” in which case only firmware through the Internet will help. EDL-This is an Emergency Download Mode:

• 🖥️ Windows PC 10/11 (macOS or Linux EDL doesn't work).
• 🔌 Original. USB-cable (preferably from the set).
• 🔧 Qualcomm drivers HS-USB QDLoader 9008.
• 📦 Firmware in.mbn or.elf format for your model.

Instructions:

1. Turn off your smartphone (hold power for 30 seconds).
2. Connect it to the PC by holding the buttons: For Redmi Note on Snapdragon: Volume up + Volume down (hold when cable is connected). For Redmi Note on Mediatek: Press Power + Volume down for 10 seconds.

Device Manager

Qualcomm HS-USB QDLoader 9008 (COMX)

Mi Flash Tool

QFil

Firmware in EDL-It takes 10-15 minutes. Once it's done, the smartphone automatically restarts. If the process is interrupted by an error, try again or check the firmware integrity.

💡

EDL-The mode is the last chance to bring the smartphone back to life, but it requires strict adherence to instructions. IMEI or damage to the communication module.

How to avoid getting back into Fastboot: prevention

To avoid the problem of hanging out in Fastboot in the future, follow these recommendations:

• 🔋 Keep an eye on battery power. Do not update software or flash the device if the charge level is below 50%.
• 🔄 Use official firmware. Custom software (e.g. Custom) ROM) Often contain errors that lead to download failures.
• 🔑 Do not unblock the bootloader unnecessarily.This increases the risk of "blocking" if firmware errors occur.
• 📱 Check your files before you run the firmware. Make sure the firmware you download is for your Redmi Note model (e.g., redwood for Note 9, mojito for Note 10).
• 🛡️ Create backups. Before any manipulation of the system, save data via Mi Cloud or TWRP.

If you often experiment with firmware, install TWRP Recovery and create a full partition backup NVRAM (stored IMEI and MAC-This will help restore the smartphone even after serious failures.

FAQ: Frequent questions about Fastboot mode on Redmi Note