How to properly disable the Xiaomi tablet: all ways (including forced)

Xiaomi tablets (Pad 5, Pad 6, Pad SE, and others) have all sorts of shutdown options, from standard power button retention to hidden features in the developer menu. But what if the device is stuck, unresponsive or requires a forced shutdown without damaging the system? In this article, we will discuss all the current methods, including the nuances for different versions of MIUI and HyperOS.

It is important to understand that improper shutdown (for example, prolonged retention of the power button for more than 20 seconds on models with MIUI 14+) can lead to a failure of the file system or loss of unsaved data, we will show how to avoid typical errors and what actions to take if the tablet does not respond at all.

1. Standard shutdown via power button

The most obvious and safe method is to use a physical button. On all Xiaomi tablets (including the Pad 5 Pro, Pad 6 Max and budget versions), the algorithm is the same:

1. Press the power button (usually located on the top or side face) to unlock the screen.
2. Hold it for 3-5 seconds until the menu with options appears.
3. Slip on the icon Turn off (or Power off in English firmware).
4. Confirm action if the system requests a re-press.

On some models (for example, Xiaomi Pad) 6S Pro) the menu may be different, instead of text, there will be pictograms (⏻).

⚠️ Warning: If the tablet restarts immediately after holding the button instead of showing the menu, this is a sign of a Power Menu malfunction.Solution: Update the firmware or reset the settings via Settings → System system → Resetting settings.

2.Output via the settings menu

If the power button is damaged or you prefer the software method, use the system menu:

1. Open Settings (the gear icon on the main screen).
2. Go to the About Phone (or About Tablet) section.
3. Slip on the item Turn off at the bottom of the screen.
4. Confirm the action in the window that appears.

On HyperOS firmware (starting in 2026), the path may differ:

Settings → System → Advanced settings → Shutdown

This method is useful if you want to turn off the tablet without using physical buttons – for example, when the case is damaged or for testing the sensor.

Close all applications (especially those with unsaved data)

Turn off the charger.

Make sure the battery is at least 5% charged (to avoid failures on next turn on)

Check if the system is being updated.-->

3. Forced shutdown (Hard Reset)

When a Xiaomi tablet hangs on the logo, doesn't respond to touches or buttons, a hardware reset is required.This method works on all models, but has risks:

• 🔋 Loss of unsaved data in open applications.
• 🔄 Possible file system failure (solved by restarting).
• ⚡ Risk of memory chip damage with frequent forced shutdowns.

Instructions for forced disconnection:

1. Hold the power button for 10-15 seconds (on Pad 6 and later - up to 20 seconds).
2. The screen should go out, and the charging indicator (if the cable is connected) should flash red.
3. Wait 30 seconds before re-energizing.

⚠️ Note: On HyperOS tablets, forced reset can trigger diagnostic mode. If a menu that says Fastboot appears after you turn on, press and hold the power button for another 10 seconds to exit.

4.Switching off through Recovery mode

If the tablet loads but doesn’t respond to standard shutdown methods (for example, due to a virus or launcher failure), you can use Recovery Mode.

Instructions for entering Recovery:

1. Turn off the tablet in any way possible (up to forced).
2. Hold the power button + increase the volume at the same time.
3. Release the buttons when the Mi logo and menu appear in English/Chinese.
4. Use the volume buttons for navigation and the power button to select Power off.

In HyperOS, the Recovery menu might look different — look for a Shutdown item or an off icon.

💡

If there is no turn off point in the Recovery menu, select Reboot → Power off. On some firmware, the option is hidden - try connecting the tablet to charge before entering Recovery.

5.Switch off via ADB (for advanced users)

If you have access to a computer and USB debugging enabled, you can turn off the tablet via the ADB command. This method is useful for automation or when physical buttons don't work.

Step-by-step:

1. Connect the tablet to the PC through USB-cable.
2. Open the command line (Windows) or the terminal (macOS/Linux).
3. Enter the command to check the connection: adb devices must appear serial number of the device.
4. Execute the shutdown command: adb shell reboot -p

If the command doesn’t work, try an alternative:

adb shell input keyevent 26

(26 is the "power out" event code in Android).

⚠️ Attention: Use ADB requires a pre-setting of the debugging USB in the developer menu (Settings) → About the tablet → Version. MIUI — tap 7 times to unlock. Without that, commands won't be executed.

6. Features of the shutdown on different firmware

The behavior of the power button and the off menu depends on the firmware version.

• 📱 MIUI 12/13: The shutdown menu appears through 3 There's a reboot option in Fastboot.
• 🔄 MIUI 14: Added protection against accidental shutdown – swipe confirmation required.
• ⚡ HyperOS (2026+): Menu with pictograms, no text, forced shutdown can trigger diagnosis.

HyperOS also has an Emergency Shutdown feature that works when holding the power button + volume down for 5 seconds, which is useful if the tablet is overheating or is unstable.

💡

On HyperOS firmware, a forced shutdown can initiate a system integrity check. If a System Restores notification appears after activation, do not interrupt the process!

7. Frequent errors and their solutions

Users often face problems when turning off Xiaomi tablets, and let’s analyze typical scenarios and ways to fix them:

If the Xiaomi Pad 6 or other model starts turning on on itself after turning off, check:

• 🔌 Auto Update Settings (Settings) → About the tablet → Updating the system).
• ⏰ Timers and alarm clocks in the app Clock.
• 🔄 Automatic reboot function in the developer menu.

FAQ: Frequent questions