How to disable the pattern lock on Xiaomi Redmi 8 Pro 128 GB: official and alternative methods

Forgot the combination of unlocking the screen on Xiaomi Redmi 8 Pro 128 GB of memory? Or just want to replace the pattern lock with a graphical key. PIN-In this article, we'll look at all the working ways to disable a pattern -- from standard settings. MIUI to emergency methods through Mi Account and hard reset.Important: the procedure differs depending on the firmware version (MIUI 12/13/14) and the status of the Xiaomi account binding.

The pattern lock on the Redmi 8 Pro is not only a protection, but a potential headache if you forget the combination. Unlike the touchscreen smartphones of 2023-2026, where biometrics (face/fingerprint) often duplicate passwords, on models like the Redmi 8 Pro, pattern remains the main method of unlocking. We tested all methods on devices with MIUI 12.5.7 and MIUI 14.0.2 — the results are summarized in the table below.

Warning: If you don’t remember your Mi Account and back up, some methods will result in a complete cleanup of internal memory (including photos, messages and apps), but the good news is that Redmi 8 Pro with a tied Xiaomi account can bypass lockdown without losing data.

1. disable the pattern lock through settings (if you know the current pattern)

The easiest way is to change the lock type right in the Settings menu, but it only works if you remember the current combination. On Redmi 8 Pro, the path to the menu may vary depending on the MIUI version:

• 📱 MIUI 12/12.5: Settings → Password and security → Screen locking
• 🔄 MIUI 13/14: Settings → Lock screen → Type of lockdown
• 🔒 General rule: Enter the current pattern lock → select the password, PIN or not

If the screen lock option is not in the main menu, try:

1. Open Settings and enter in the search bar "Block".
2. Select the screen lock type → enter the current pattern.
3. Click Remove the pattern lock or change it to another type.

I remember the current pattern lock.|Mi Account tied to phone|There is a backup of important data|Battery charge > 30%-->

⚠️ Note: On some Redmi 8 Pro firmware, after disabling the pattern lock, the system may require you to create a new one. PIN If you skip this step, the phone will be unprotected, which is not safe if you lose the device.

2. Reset the pattern lock through the Mi Account (without loss of data)

If you forget the pattern, but the phone is tied to a Xiaomi account, you can reset the lock via Find Device. This method works on the Redmi 8 Pro with MIUI 12-14 provided:

• 🌐 Device connected to the Internet (Wi-Fi or mobile network).
• 📱 Mi Account was tied before the pattern lock was installed.
• 🔄 Find the device activated in the settings.

Instructions:

1. Go to i.mi.com from a PC or other phone.
2. Sign in with the same account as Redmi 8 Pro.
3. Select the locked device → Unlock the screen.
4. Confirm the action via SMS or email.
5. Set a new password/PIN – the pattern lock will be deleted.

After unlocking through Mi Account, we recommend:

• 🔐 Just put a new one in. PIN Password or password (pattern lock on Redmi 8 Pro is easily forgotten).
• 📤 Make a backup of the data in Settings → Additionally. → Backup.
• 🔄 Update MIUI Up to the latest version – new firmware added the option of recovery through Google account.

3. Alternative Unlocking Methods (ADB, Safe Mode)

If the Mi Account is not tied and factory reset is not desirable, you can try bypassing the graphical key through Restore Mode or ADB. These techniques require technical skills and do not work on all versions of MIUI.

Method 1: Safe Mode (Safe Mode)

On some Redmi 8 Pro firmware in Safe Mode, the pattern lock is temporarily disabled.

1. Turn off the phone.
2. Press the Power button before the Redmi logo appears.
3. When the logo disappears, immediately pinch and hold Volume down until full load.
4. In the lower right corner, the inscription Safe mode will appear.
5. Go to Settings → Password and Security and turn off the pattern lock.

⚠️ Attention: MIUI 14 Safe Mode may not work - the system blocks changing security settings even in this mode. V14.0.2.0.TCNCNXM.

Method 2: ADB (For Power Users Only)

If USB debugging is enabled on the phone, you can delete the file with the key via ADB.

1. Connect the Redmi 8 Pro to your PC via USB.
2. Open the command line and type in: adb shell su rm /data/system/gesture.key rm /data/system/locksettings.db rm /data/system/locksettings.db-wal rm /data/system/locksettings.db-shm reboot
3. After rebooting, the pattern lock will be reset.

⚠️ Warning: This method only works on rooted devices or if debugging has been activated before. On standard Redmi 8 Pro firmware, no root rights, the su command will not execute.

Reset via Mi Account|Hard Reset (full reset)|ADB/command-line|Safe Mode|None of the above.-->

4.Hard Reset – a last resort

If other methods fail, hard reset is the factory reset, which removes all data from internal memory (photos, videos, messages, apps) but is guaranteed to unlock the Redmi 8 Pro.

1. Turn off the phone.
2. Press the power + volume up at the same time for 10-15 seconds.
3. Release the buttons when the Mi Recovery logo appears.
4. Select the language (volume buttons) → Wipe Data → Wipe All Data.
5. Confirm the action and wait for the reboot.

⚠️ Note: After a hard reset on Redmi 8 Pro, you may need to re-assign your Mi Account. If you forget the data from your account, the phone will turn into a “brick” – it can only be unlocked through the official Xiaomi service (cost) ~3 000–5 000 ₽).

5. How to avoid blocking in the future

To avoid the problem of a forgotten pattern lock on Redmi 8 Pro, follow the simple rules:

• 🔑 Use it. PIN-code instead of pattern, it is easier to remember.
• 📧 Link your Mi Account and turn on Find the device.
• 🔄 Make backups regularly through Settings → Additionally. → Backup.
• 📱 Set up the unlock by fingerprint (if the sensor is serviceable).

If you’re afraid to forget your password, write it down in a secure location (like Google Keep with encryption) or use a password manager like Bitwarden. You can also activate Smart Lock (smart location unlock or Bluetooth device) on Redmi 8 Pro, but this feature isn’t available on all firmware.

💡

On the Redmi 8 Pro with MIUI 14, you can enable face unlock, even if the main protection is the pattern lock. To do this, go to Settings → Lock screen → Face data and add your image. This will speed up access to the phone, but does not cancel the pattern when you reboot.

6. Frequent errors and their solutions

When trying to disable the pattern lock on the Redmi 8 Pro, users often face typical problems.

Error: "Incorrect pattern lock. Try again in 30 seconds."

If the system blocks the input after 5 failed attempts:

• 🕒 Wait 30 to 60 seconds and try again (timer will reset).
• 🔄 Reboot your phone – sometimes it resets the try counter.
• 📱 If the pattern is accurate but not working, check the sensitivity of the screen (possibly the sensor is dirty or damaged).

Error: "Device not found" on i.mi.com

If Redmi 8 Pro is not displayed in your Mi Account:

• 🌐 Make sure your phone is connected to the internet (turn on your mobile data if your Wi-Fi is off).
• 🔄 Restart the device and check again in 5 minutes.
• 📱 Check if Find the device in the settings (Settings) is disabled → Mi Account → Find the device).

Error: “I failed to reset” in Recovery

If there is a hard reset error:

• 🔋 Make sure the battery is charged > 50% (at low charge, the discharge may be interrupted).
• 🔄 Try another way to log in to Recovery: pinch the power + Volume up for 20-30 seconds.
• 📱 If you use an unofficial firmware, restore the stock MIUI via Fastboot.

💡

On the Redmi 8 Pro with MIUI 14, after 10 failed attempts to enter the pattern lock, the phone may require a Mi Account to be linked even if it was not there before, in which case only a Recovery reset or a service center will help.

FAQ: Frequent questions about unlocking the Redmi 8 Pro