How to get out of Fastboot on Xiaomi Redmi Note 8 Pro: 5 working methods

Xiaomi Redmi Note 8 Pro is one of the most popular smartphones of the brand, but its owners often face an unexpected transition to Fastboot mode. This engineering mode can appear after a failed update, resetting settings or even accidentally pressing a combination of buttons. Unlike a normal reboot, a screen with a hare in a hat-eared and the inscription FASTBOOT signals that the system does not boot in normal mode.

In this article, we will discuss all possible ways to exit from Fastboot to Redmi Note 8 Pro – from basic to advanced, including methods for cases when the smartphone does not respond to buttons. You will also learn why the device freezes in this mode, how to prevent the problem from recurring and what to do if standard methods do not work, instructions are adapted to a specific model with its hardware features (Meditek Helio G90T processor and custom bootloader).

What is Fastboot and why does the Redmi Note 8 Pro fall into it?

Fastboot mode is a low-level diagnostic tool designed to firmware, unlock the bootloader or restore the system. On the Redmi Note 8 Pro, it activates when:

• 🔄 Interrupted update MIUI (For example, when the battery is less than 30% during installation OTA).
• 🔧 Failing to get root rights or install custom recovery (TWRP).
• 🔋 Critical battery discharge during reboot.
• 🎯 Accidental pressing of the combination Volume down + Powering for more than 10 seconds.
• 🛠️ Hardware failures (damage to the charging connector, oxidation of battery contacts).

Unlike Recovery mode, where you can choose actions through the menu, the Fastboot on the Redmi Note 8 Pro looks like a static screen with the Mi Bunny logo and the FASTBOOT inscription at the bottom. This is not a mistake, but a signal that the system expects commands from the user or PC. The main danger is that prolonged stay in this mode can lead to a battery discharge of up to 0%, which can lead to a complete lockdown of the device.

⚠️ Note: If your Redmi Note 8 Pro loads into the Fastboot after each shutdown, this may indicate damage to the boot partition or incompatibility of the installed firmware. SP Flash Tool.

Method 1: Standard button exit (for most cases)

If your smartphone responds to physical buttons, try the simplest method:

1. Hold the Power button for 15-20 seconds until the screen goes out.
2. Wait 30 seconds – the device should automatically restart to normal mode.
3. If the screen shows FASTBOOT again, repeat step 1, but after turning off immediately press Volume up + Power to enter Recovery.

This method works in 70% of cases if the cause was an accidental activation or a temporary failure. If the smartphone does not respond, move to the next method.

Make sure the battery is at least 20 times charged%|

Turn off all cables (USB, headphones) |

Check if the power button is stuck |

Try pressing buttons with different strengths (sometimes contacts are oxidized)

-->

Method 2: Reboot with Recovery Mode

If the standard power button holding didn’t help, try logging into Recovery and rebooting from there:

1. Turn off the device (hold power until vibration).
2. Press the combination Volume up + Power and hold until the Mi logo appears.
3. From the Recovery menu, select Reboot → Reboot to System (use volume buttons for navigation and power for confirmation).

If the Recovery menu is in Chinese, focus on the icons: the desired item is usually indicated by an arrow with the inscription (reboot).

⚠️ Note: Some Redmi Note 8 Pro firmware may not have Reboot to System. In this case, select Reboot to Bootloader, and then repeat the steps from Method 1.

Method 3: Use ADB-Teams (for experienced users)

If you have access to a computer, you can log out of Fastboot using ADB (Android Debug Bridge), a method that is suitable if the smartphone is detected by a PC in Fastboot mode.

Instructions:

1. Download and install Platform Tools (includes fastboot and adb).
2. Connect the Redmi Note 8 Pro to the PC USB-cable (preferably original).
3. Open the command line (Win + R → enter cmd) and go to the folder with the platform-tools:

cd C:\platform-tools

1. Run a command to check the connection:

fastboot devices

If the device is determined (the serial number will appear), enter:

fastboot reboot

If the team doesn’t work, try:

fastboot oem reboot

💡

If your PC can’t see the device, install Mediatek Preloader drivers or use the Mi Flash Tool to automatically install drivers.

Method 4: Firmware via SP Flash Tool (extremely)

If previous methods didn’t work, most likely, system partitions are damaged, in which case you will need full firmware through the SP Flash Tool, a utility for devices on Mediatek processors.

Step-by-step:

1. Download the official firmware for the Redmi Note 8 Pro (the version should match yours!): 🌍 Official website MIUI (Choose Global or EEA depending on the region). 🔧 Alternative: Xiaomi Firmware Updater (there are older versions).

.tgz

SP Flash Tool

flash_tool.exe

Scatter-loading

MT6785_Android_scatter.txt

Download Only

Firmware Upgrade

Download

switched off

Redmi Note 8 Pro

⚠️ Attention: Firmware through SP Flash Tool will reset all data and can cause loss IMEI, If the wrong scatter file is selected, be sure to check the firmware version and device model (begonia for Redmi Note 8 Pro) before the procedure).

Standard button reboot |

Recovery Mode|

ADB-team|

Firmware via SP Flash Tool|

Nothing worked, the problem remained.-->

Method 5: Hardware reset (if the smartphone does not respond)

In rare cases, the Redmi Note 8 Pro may “hang” in the Fastboot due to hardware problems: damage to the power button, oxidation of the battery contacts or a failure in the operation of the power controller.

• 🔋 Turn off the battery (if it is removable) for 5-10 minutes, then plug back in and try to turn on.
• 🔌 Connect the charger and hold the power. + Loudness up for 30 seconds.
• 🛠️ If the smartphone does not show signs of life, contact the service center - a malfunction of the motherboard is possible.

The Redmi Note 8 Pro has a non-removable battery, but you can turn it off by gently putting the connector in the air (requiring disassembly of the body), which is a last resort — only use it if you are confident in your skills.

💡

If you turn on your smartphone after a hardware reset, but it goes back to Fastboot, the problem is the firmware. You need a full firmware reflash through your PC.

How to prevent re-entry into Fastboot

To avoid recurrence, follow these recommendations:

• 🔄 Don't interrupt the update. MIUI (Wait for the full download and the inscription Update completed).
• 🔋 Keep an eye on battery levels – do not upgrade or reset settings when charged below 50%.
• 🛡️ Do not install custom firmware without unlocking the bootloader (this leads to hard brick).
• 🔧 Regularly check the integrity of system files through Settings → The phone. → Verification of updates.

If you’re experimenting with firmware often, install the Quick Reboot app from Google Play – it lets you safely reboot to Fastboot or Recovery without the risk of hanging over.

FAQ: Frequent questions about Fastboot on Redmi Note 8 Pro