How to Get Out of Fastboot on Xiaomi Redmi: 5 Ways to Work (2026)

Fastboot mode on Xiaomi Redmi smartphones is a special diagnostic mode that is used to firmware, unlock the bootloader or restore the system. However, many users face a situation where the device freezes in the Fastboot after a failed update, resetting or experimenting with firmware. Unlike conventional freeze, exiting this mode requires specific actions - simply holding the power button here will not help.

In this article, we will discuss all the current ways to disable Fastboot on Redmi Note. 10/11/12, Redmi 9/10, Redmi A1/A2 You will learn how to exit mode without losing data (if possible), what tools you will need to force you to disable, and how to avoid being re-entered into Fastboot. Particular attention will be paid to typical errors, because of which the smartphone “stuck” in this mode – for example, interrupted firmware through the Mi Flash Tool or conflict versions. boot.img.

If your Xiaomi Redmi shows a black screen with the words FASTBOOT and the icon of the rabbit in the hat, do not panic - in 90% of cases, the problem can be solved yourself.

1.What is Fastboot on Xiaomi and why the phone hung in it

Fastboot Mode (not to be confused with Recovery!) is a low-level interface for interacting with the Android bootloader.

• 🔧 Forced – through a combination of buttons (volume down) + Nutrition)
• 📱 Automatically – if the system cannot load the kernel (boot.img)
• 💻 Adb reboot bootloader or fastboot reboot
• ⚡ After a failed firmware through the Mi Flash Tool or TWRP

The main reasons for hanging out in Fastboot on Xiaomi Redmi:

It is important to distinguish Fastboot from EDL Mode (Emergency Download Mode), which is used by service centers to “reanimate” bricks. EDL screen is completely black, and Fastboot displays the Mi Bunny logo and the words FASTBOOT.

⚠️ Warning: If your Redmi hit Fastboot after trying to get root through Magisk, don't try to stitch stock firmware over the custom one - it could lock the bootloader permanently.

Method 1: Standard button exit (without PC)

If your smartphone is stuck in Fastboot without damaging system files, try the standard exit procedure:

Hold the power button for 10-15 seconds|If it doesn't help, press the volume up. + 20 seconds power.|Wait 1-2 minutes – sometimes the system is delayed|Try connecting charging (on some models, Fastboot blocks output when low charge is used)-->

On Redmi Note 12 and later, the button combination may not work due to hardware locking.

1. Connect your smartphone to charging for 10 minutes.
2. Press Volume Up + Volume Down + Power for 30 seconds.
3. If the screen is gone and lit up again, release the buttons (this is a sign of a reboot).

If you've had this manipulation, the phone comes back to Fastboot, it's a deeper problem, like the bootloader or the system partitions are damaged.

💡

On the Redmi. 9A/9C redmi A1 sometimes helps extraction SIM-These models are sensitive to conflicts with communication modules in Fastboot.

3. Method 2: Exit through the Mi Flash Tool (for unlocked bootloader)

If the standard buttons don’t help, you’ll need a PC with Xiaomi drivers installed and the Mi Flash Tool utility.This method is suitable for devices with an unlocked bootloader (if you’ve previously received permission through Mi Unlock).

Step-by-step:

1. Download the official firmware for your model (choose the Fastboot version, not Recovery).
2. Unclarify the firmware into a folder without Cyrillic characters (for example, C:\Redmi_Firmware).
3. Install the Mi Flash Tool and connect your phone to your PC in Fastboot mode (should be defined as Android Bootloader Interface).
4. In Mi Flash, click Select, specify the firmware folder, then select Clean all (this will erase all data!).
5. Press Flash and wait until it is completed (the process will take 5-10 minutes).

After successful firmware, the phone will automatically reboot to the system. If Mi Flash gives a Flash is not done error, check:

• 🔌 Cable USB (Use the original from Xiaomi)
• 🖥️ Port port USB (try USB 2.0 on the back of the PC)
• 🔄 The firmware version (it must coincide with the region of the device)

⚠️ Note: Firmware via the Mi Flash Tool with Clean all option deletes all data, including photos and apps. If your phone had important files, try no-reset recovery methods first (see Method 4).

Method 3: Fastboot commands via ADB (for power users)

If you have access to ADB and Fastboot on PC, you can try restarting the device to normal mode via commands.This method works even if the bootloader is locked, but requires minimal knowledge of how to work with the console.

Instructions:

1. Download and install Google’s Platform Tools.
2. Connect Redmi to your PC in Fastboot mode.
3. Open the command line in the folder with platform-tools and type:

fastboot devices

If the device is determined (its serial number will appear), do:

fastboot continue

This team is trying to keep booting the system. If it doesn't work, try:

fastboot reboot recovery

This will reboot the phone in Recovery Mode, from where you can make a reset or install an update.

For Redmi Note 11 and later models, you may need to unlock critical partitions:

fastboot flashing unlock_critical

Then repeat the command fastboot continue.

5. Method 4: Recovery through EDL Mode (for "bricks")

If none of the previous methods helped, and the phone cyclically returns to the Fastboot, then critical partitions (for example, modem or dsp) are damaged. EDL Mode (Emergency Download Mode) – Emergency mode that bypasses the bootloader.

This will require:

• 🔧 Qualcomm HS-USB QDLoader 9008 driver (manually installed via Device Manager)
• 💾 Firmware in.mbn or.elf format (see forums) 4PDA or XDA)
• 🖥️ Mi Flash Pro or QFil (for Qualcomm chips)

Algorithm of action:

1. Turn off the phone (if it's in Fastboot, press Power + Volume up for 30 seconds).
2. Press Volume Up + Volume Down and connect the USB cable to the PC.
3. Device Manager should have a device QHSUSB_BULK qualcomm HS-USB QDLoader 9008.
4. Install the driver manually (download from here).
5. Open Mi Flash Pro, select firmware in.mbn format and press Flash.

It takes 10 to 20 minutes to run through EDL, and when it's done, it should automatically reboot to the system. If the process is interrupted, try again, and interruption in EDL Mode usually doesn't lead to irreversible consequences.

⚠️ Attention: Firmware through EDL Mode resets all settings and data, including IMEI. After recovery, check it out. IMEI If it dropped on 00000000000000, you will need to restore it through an engineering menu or service center.

6. Method 5: Contacting the service center (guarantee cases)

If all independent attempts to exit Fastboot failed, you can contact the official Xiaomi service center.

• 📱 Phone for warranties (independent firmware may deprive the warranty)
• 🔧 The loader is damaged after a failed unlock
• 📡 Dropped. IMEI serial number
• 💥 The device is not defined in either Fastboot or Fastboot. EDL Mode

What to do before visiting the service:

1. Check if you still have a warranty when you run your firmware through the Mi Flash Tool (usually not).
2. If the warranty is valid, do not mention attempts to unlock or install custom firmware.
3. Bring a check or a confirmation of purchase (for warranty repairs).
4. Clarify the cost of restoration – on average it is 1,500–3,000 rubles (2026).

The service center uses professional boxes (UFI Box, Medusa Pro), which allow you to recover even “dead” devices with damaged memory. However, if the phone was bought abroad (for example, the global version of the Redmi Note 12 Pro+), Russian services may refuse repair due to differences in firmware.

💡

If your Xiaomi Redmi got into Fastboot after an update via OTA, the service center can restore it under warranty, as this is a sign of a software failure, not user actions.

7.How to avoid getting into Fastboot in the future

To avoid getting stuck in Fastboot, follow these guidelines:

Additional precautions:

• 🔋 Do not interrupt the firmware or update (even if the process is delayed).
• 📥 Before experimenting with firmware, do a backup through TWRP or Mi PC Suite.
• 🔌 Use original cables and power supplies – cheap accessories can cause firmware failures.
• 📡 Before unlocking the bootloader, link the Mi Account to the device (this will help restore access after the reset).

If you often experiment with firmware, keep on hand:

• 📁 Archive with stock firmware for your model.
• 💾 Backup copy of the persist section (responsible for IMEI and serial numbers).
• 🔧 Mi Flash Tools for the Mi Flash Tool, ADB and Qualcomm drivers.

FAQ: Frequent questions about Fastboot on Xiaomi Redmi