Xiaomi Redmi 7 is a popular smartphone with a great price-quality ratio, but even it is not immune to a sudden transition to Fastboot mode. This engineering mode can appear after a failed update, resetting settings or even accidentally pressing the button combination. If your Redmi 7 is getting stuck on the screen with a rabbit in a hat-eared and FASTBOOT, do not panic - in 90% of cases, the problem can be solved yourself.
In this article, we will discuss all possible ways to exit from Fastboot – from elementary (a simple reboot) to advanced (working with ADB and MiFlash). Particular attention will be paid to the unique feature of Redmi 7: its bootloader is blocked after 3 unsuccessful attempts to unlock, which can complicate the process, you will also learn how to avoid re-entering Fastboot and what to do if the smartphone does not respond to any manipulations.
What is Fastboot and why does Redmi 7 get it?
Fastboot mode (not to be confused with Fast Boot in settings!) is a low-level firmware mode for Android devices that allows you to interact with the bootloader via a computer. On Xiaomi Redmi 7, it is activated in several cases:
- 🔄 Failed update MIUI — If the firmware is interrupted or the wrong version is installed.
- 🔧 Reset to factory settings via Recovery if system is damaged.
- 🔑 Attempt to unlock the bootloader without official permission Xiaomi.
- 🎯 Accidental pressing of the combination Volume down + Power on-set.
- 🔋 Critical battery discharge while working with system files.
On the outside, the Fastboot mode on Redmi 7 looks like a black screen with the Mi Bunny logo and the FASTBOOT label on the bottom. The device doesn't respond to touching the screen, but connects to the computer like the Android Bootloader Interface. That's normal behavior -- it should be.
⚠️ Note: If your Redmi 7 is stuck in the Fastboot after trying to install custom firmware (for example, LineageOS), you can bring it back to life only through the official firmware MiFlash.
Method 1: Simple reboot (works 60% of the time)
Before you start complex manipulations, try a forced reboot, which works if the Redmi 7 hit the Fastboot accidentally (for example, due to button clamping) or after a mild crash.
Instructions:
- Press the Power button for 15-20 seconds until the screen goes out.
- Release the button and wait 30 seconds – the device should turn on in normal mode.
- If the screen shows FASTBOOT again, repeat the action 2-3 times.
If the reboot didn’t help, try an alternative combination:
- Press Volume Up + Power for 10 seconds.
- Release the buttons when the screen goes out and wait for the standard boot.
⚠️ Attention: On Redmi 7 with unlocked bootloader long hold Volume Down + The power will bring you back to the Fastboot. Avoid this combination!
☑️ Preparations for reset
Method 2: Exit through Recovery Mode (if the system is not damaged)
If a simple reboot doesn’t work, the next step is to try booting into Recovery Mode and resetting or rebooting from there.
- 📱 System system MIUI Not damaged (no errors in downloading).
- 🔄 You have not blocked the bootloader through Mi Unlock.
- 🔧 They did not install custom firmware or cores.
Instructions for entering Recovery:
- Turn off the phone (squeeze the power for 20 seconds).
- Press the combination of Loudness up + Power and hold until the Mi logo appears.
- Release the buttons and you will see the Recovery menu (in English or Chinese).
On the Recovery menu:
- Select Reboot → Reboot to System.
- If this doesn't work, try Wipe Data → Wipe All Data. Attention! This will delete all the data on the phone.
| Action in Recovery | Description | Effects of consequences |
|---|---|---|
| Reboot to System | Reboot to normal mode | No data loss |
| Wipe Data | Reset to factory settings | All files and applications are deleted |
| Wipe Cache | Clearing the system's cache | Without loss of personal data |
| Connect with MIAssistant | Connecting to a PC for recovery | Official MiFlash software is required |
💡
If the menu is in Chinese, focus on the icons: 🔄 — restart, 🧹 — dataset, 📱 — PC-connection.
Method 3: Use ADB and Fastboot (for advanced users)
If Redmi 7 doesn't want to leave the Fastboot, you'll have to connect to it via your computer.
- 🖥️ Windows computer (or Linux/macOS driverless).
- 🔌 Cable USB Type-C (preferably original).
- 🛠️ Utilities. ADB Fastboot (you can download from the Android Developers website).
- 🔓 Unlocked bootloader (if blocked - see method 4).
Step-by-step:
- Connect Redmi 7 to your computer in Fastboot mode.
- Open the command line (Win + R → cmd) and check the connection: fastboot devices If the device is determined (the serial number will appear), continue.
- Run the reboot command: fastboot reboot
- If it doesn’t work, try resetting the cache: fastboot erase cache then fastboot reboot again.
If the commands don’t help, try reflashing the bootloader (for power users only!):
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot reboot⚠️ Warning: Using fastboot incorrectly can turn Redmi 7 into a brick. If you are not sure about your actions, skip this method and go to MiFlash.
What if the fastboot can’t see the device?
Method 4: Recovery via MiFlash (if the phone is a brick)
If the previous methods didn't work, you just have to reflash the phone over MiFlash, which is a last resort, and it's going to bring the Redmi 7 back to life even after a major crash.
- 🖥️ Windows computer 7/10/11 (on macOS/Linux MiFlash is not working).
- 📁 Official firmware for Redmi 7 (download from Xiaomi website).
- 🛠️ MiFlash (last version).
- 🔓 Unlocked bootloader (if blocked – unlock through Mi Unlock Tool).
Firmware instructions:
- Unpack the firmware in a folder without Cyrillic (for example, C:\redmi7_firmware).
- Install MiFlash and drivers (they come with a bundle).
- Connect Redmi 7 in Fastboot mode to your computer.
- In MiFlash, click Select and specify the firmware folder.
- Select firmware mode: Clean All - complete cleaning (recommended). Clean All and Lock - cleaning + lock bootloader (if you need to return the warranty).
Flash
Important: After you have been firmwareed through MiFlash, all data on the phone will be deleted and the bootloader can be blocked, and if you have unlocked it earlier, you will have to repeat the procedure in 30 days (Xiaomi restriction).
💡
MiFlash is the only official way to bring the brick back to life, but it requires an unlocked bootloader and the right firmware for your model (on Redmi 7 it’s onc for the global version or olivelite for Chinese).
Method 5: Hardware reset (if the phone doesn't respond to anything)
If Redmi 7 doesn't respond to buttons, isn't detected by a computer, and doesn't even charge, it's a hardware reset, and it's a risky method, but sometimes it's the only one that works.
Instructions:
- Extract. SIM-Cards and memory card (if any).
- Connect your phone to charge and leave it for 30 to 60 minutes (even if there is no charging indication).
- Press the combination Volume up + Volume down + Power for 20-30 seconds.
- If the screen blinks or goes out, release the buttons and try to turn on the phone normally.
If that doesn’t help, there may be a problem with the hardware:
- 🔋 Failed battery (not holding charge).
- 🔌 The charger connector is damaged or USB-port.
- 🔧 Power controller burned (requires repair).
⚠️ Warning: Hardware reset can lead to loss IMEI or damage to the section EFS (If the phone does not catch the network after reset, you will need to restore the data. IMEI through QCN service-centre.
How to avoid getting back into Fastboot
To prevent Redmi 7 from getting stuck in Fastboot mode, follow these tips:
- 🔄 Update. MIUI Only through official channels (Settings) → The phone. → Updating the system).
- 🔧 Do not install custom firmware unless the bootloader is officially unlocked.
- 🔋 Do not allow the battery to run out of power (especially during upgrades).
- 🛡️ Turn off "Fast Boot" in the developer settings (Settings) → Additionally. → For developers → Fast loading).
- 🔑 Do not accidentally press buttons when on/off (especially Volume Down). + Nutrition).
If you are actively experimenting with firmware, keep on hand:
- 📁 Backup copy EFS (can be done through TWRP).
- 🔗 Link to the official firmware for your Redmi 7 model.
- 🛠️ Established ADB/Fastboot and MiFlash on the computer.
💡
Create a folder on your computer called Xiaomi Tools with firmware, drivers, and utilities, and if you crash, you'll save hours searching for files.