How to get out of Fastboot on Xiaomi Redmi 4A: all the working ways

Xiaomi Redmi 4A is one of the most popular budget smartphones of the brand, but even it is not immune from a sudden transition to Fastboot mode. This engineering mode, designed for firmware and diagnostics, can become a headache if the device is getting stuck on the screen with a rabbit in a hat-eared. Unlike a regular reboot, exiting the Fastboot requires specific actions, and improper manipulation can exacerbate the problem.

In this article, we will discuss all the possible causes of Redmi 4A getting into Fastboot mode, from random button pressing to firmware failures, and provide step-by-step instructions for exiting it. We will focus on the nuances of working with MIUI, unlocking the bootloader and restoring through the Mi Flash Tool. If your smartphone is stuck on the FASTBOOT logo, do not panic: in 90% of cases, the problem can be solved without contacting the service center.

Why Redmi 4A is loading into Fastboot: The main reasons

Fastboot mode on Xiaomi is activated not by chance, most often it is the result:

• 🔄 Incorrect firmware updates – interrupted download OTA or MIUI.
• 🔧 Failure to unlock the bootloader – if the process was interrupted at the Mi Unlock Tool step.
• 📱 Hardware malfunctions – problems with the power button or battery (especially relevant for Redmi) 4A older than 3-4 years).
• 🖱️ Accidental pressing of the combination of buttons - clamping Volume down + Power on-set.
• 🦠 Viruses or corrupted system files – rare, but possible when installing third-party firmware.

It is important to distinguish Fastboot from Recovery mode: in the first case, the Mi Bunny logo (rabbit in the hat) with the inscription FASTBOOT is displayed on the screen, in the second - a menu with items in English or Chinese. If your Redmi 4A hit the Fastboot after a failed firmware, you will most likely need to flash through the Mi Flash Tool.

⚠️ Note: If your smartphone switched to Fastboot after a fall or impact, do not try to leave the mode software. This may be a symptom of damage to the motherboard - in this case, a diagnosis is required at the service center.

Method 1: Standard exit from Fastboot (without PC)

If Redmi 4A hit the Fastboot by accident (for example, because of button clamping), try the standard exit method:

1. Press the power button for 10-15 seconds until the screen goes out.
2. Wait 30 seconds – sometimes the device automatically restarts to normal mode.
3. If the screen shows FASTBOOT again, repeat step 1, but after turning off immediately press Volume Up + Power to enter Recovery.

From the Recovery menu (if available), select Reboot → Reboot to System. If the menu is in Chinese, look for characters →

If the standard method didn’t work, move on to the next method – using a PC and the Mi Flash Tool utility.

Method 2: Exit via Mi Flash Tool (PC required)

This method is suitable if the Redmi 4A is stuck in the Fastboot due to a firmware failure or unlocking the bootloader.

• 💻 Windows computer 7/10/11 (on Mac/Linux Possible problems with drivers).
• 🔌 Cable USB Type-C (original or qualitative analogue).
• 📥 Mi Flash Tool (official version).
• 📂 Firmware for Redmi 4A (Fastboot version ROM, Not Recovery!).

Step-by-step:

1. Download and install the Mi Flash Tool from Xiaomi’s official website.
2. Unpack the firmware in a folder without Cyrillic characters (for example, C:\Xiaomi\Redmi4A_Fastboot).
3. Connect the switched off smartphone to the PC in Fastboot mode (clip Volume down + Power).
4. Launch the Mi Flash Tool, press Select and specify the path to the firmware folder.
5. Select firmware mode: Clean all (recommended for crashes); Clean all and lock (clean + lock the bootloader (if you don't need to unlock); Save user data (risky in case of serious failures).

Flash

⚠️ Note: If the Mi Flash Tool gives you an error "Couldn't find fastboot devices", check the drivers (install Mi). USB Driver or try another one USB-port (preferably) USB 2.0).

💡

If the smartphone does not turn on after firmware, try to pinch Volume up + Power for 20-30 seconds - this sometimes helps to "wake up" the device.

Method 3: Use ADB and Fastboot (for advanced users)

If the Mi Flash Tool didn't help or you prefer manual control, you can log out of Fastboot via the command line.This method requires ADB and Fastboot drivers installed.

Instructions:

1. Download Google’s Platform Tools and unpack it into the C:\platform-tools folder.
2. Connect your smartphone in Fastboot mode (as in Method 2).
3. Open the command line in the folder with platform-tools (press Shift + PCM → Open the command window).
4. Enter the command to check the connection: fastboot devices If the device is detected, you will see its serial number.
5. Reboot your smartphone to normal mode: fastboot reboot If the team does not work, try: fastboot continue

For reset via Recovery:

1. Turn off your smartphone (clip Power + Volume up for 10 seconds).
2. Log in to Recovery: Press Volume Up + Power before the Mi logo appears.
3. From the menu, select Wipe Data → Wipe All Data (or similar in Chinese).
4. Confirm the reset and reset.

⚠️ Warning: Hardware reset will delete all data, including photos, contacts and apps. If the smartphone was enabled sync with Mi Account, some data (contacts, notes) can be restored after logging into the account.

💡

If after resetting the smartphone again falls into the Fastboot, the problem is most likely hardware (damaged memory or power controller).

Prevention: How to avoid getting back into the Fastboot

To prevent Redmi 4A from getting stuck in Fastboot mode, follow these guidelines:

• 🔄 Update the firmware only through official channels (Settings) → The phone. → Updating the system).
• 🔧 Don’t interrupt the process of unlocking the bootloader – wait 100% in the Mi Unlock Tool.
• 📵 Avoid “left-handed” firmware – use only Fastboot ROM from the official Xiaomi website.
• 🔋 Keep an eye on battery power – do not update if the charge is below 50%.
• 🛡️ Install a reliable antivirus (such as Avast or Kaspersky) if you install it. APK source.

On the Redmi. 4A firmware MIUI 10 often occurs bug in which the smartphone spontaneously goes to Fastboot after extraction SIM-Solution: Update to the latest available version or roll back to a stable one MIUI 9.6.

Frequent mistakes and their solutions

When you use Fastboot, you often have a problem with the typical ones, and let's look at the most common ones.

If none of these methods worked, it may be hardware, such as a damaged memory chip (eMMC) or power controller, in which case we recommend you contact Xiaomi’s service center.

FAQ: Answers to Frequent Questions