How to remove safe mode on the TV Xiaomi Mi TV: instructions 2026

Safe Mode on Xiaomi Mi TVs is a diagnostic mode that automatically activates when system crashes, application conflicts or incorrect updates are activated, in which all third-party applications are turned off and the interface works with minimal functionality. While the mode is useful for troubleshooting, many users face the problem: the TV gets stuck in safe mode and does not return to normal operation.

In this article, we will discuss 5 working ways to disable safe mode on Xiaomi Mi TV (including the Mi models TV 4A/4S/4X/5/5X, Mi TV Q1/Q2, Redmi Smart TV You'll learn how to exit mode through standard settings, hardware reset, and what to do if the TV doesn't respond to the remote. All methods have been tested on firmware. MIUI TV 2.0–4.0 relevant 2026 year-end.

Before you start taking action, make sure the problem isn’t related to a damaged remote or unstable power supply – sometimes it’s enough to restart the TV or replace the batteries in the remote so that the mode shuts down automatically.

1. Standard output via the settings menu

If the TV is responding to the remote and booting in safe mode, the first thing you should do is try to turn off the mode via the system menu, which works on most Xiaomi Mi TV models and does not require a data reset.

Instructions:

• 📺 Press the Menu (or Settings) button on the remote and go to Settings. → System system → On TV.
• 🔄 Find Safe Mode and select it. In some firmware, this may be called Diagnostic Mode.
• ❌ Click Disable or Exit and confirm the action.The TV will automatically restart.
• 🔋 If the item is not on the menu, try holding the Power button on the remote for 10-15 seconds – this sometimes works as a forced reboot.

On the Mi TV Q1/Q2 and Redmi Smart TV X models, the path may be different: Settings → Device → Reset and Update → Safe Mode.

⚠️ Warning: If the TV is booted back in Safe Mode after the mode is turned off, it indicates a damaged system application or firmware conflict, in which case you will need to reset or flash the firmware.

2. Forced reboot via remote

If the standard output didn’t work, try hardware reboot, which helps when the system is stuck in safe mode due to a temporary failure.

How to reboot:

1. Turn off the TV for 30 seconds.
2. Press and hold the Power button on the remote (not on the TV!).
3. Connect the TV back to power, continuing to hold the Power for 10-15 seconds until the Mi TV logo appears.
4. Release the button and wait for the full load.

On some models (e.g. Mi TV 4X), instead of the Power button, you need to hold the Menu + Volume Down combination when you turn on.

Turn off the TV | Make sure the batteries are working | Prepare a spare remote (if any) | Do not press other buttons during the procedure

-->

If the safe mode remains after the reboot, proceed to the next method.

3. Reset to factory settings

Reset is a radical but effective way to do this if previous methods have failed, and it removes all installed apps, accounts, and settings, bringing the TV back out of the box, and it is recommended to use it if the safe mode is caused by corrupted data or conflicting applications.

How to reset:

• 🔧 Go to Settings. → System system → Resetting settings (or Settings) → The device → Reset and update).
• 🔄 Select Reset to factory settings and confirm the action.
• ⏳ Wait for the process to be completed (5-10 minutes) and the TV will restart automatically.

If the menu is not available due to a failure, use hardware reset:

1. Turn off the TV.
2. Press and hold the Volume Up button on the TV body (not the remote!).
3. Connect the power by continuing to hold the button until the recovery menu appears.
4. With volume buttons, select Wipe Data/Factory Reset and confirm with the Power button.

⚠️ Attention: On Mi models TV P1 mi TV ES hardware reset may require input PIN-Standard code is 1234 or 0000. If it doesn't fit, contact Xiaomi for support.

4. Update firmware via USB

If the safe mode appears after a failed update or because of bugs in the current version of the software, the solution is manual installation of the firmware, which is suitable for advanced users, since it requires downloading official software and working with files.

Step-by-step:

1. Download the firmware for your model from the official Xiaomi Support website (Firmware section). Make sure the version is compatible with your TV (check the model in Settings → About TV).
2. Unpack the archive and copy the firmware file (usually with the.zip or.pkg extension) to the flash drive formatted in FAT32.
3. Put the flash drive in. USB-TV port and go to Settings → System system → Update of the PO → Local Update.
4. Select a firmware file and confirm installation. Don't disconnect the TV from the network during the process!

For Mi TV 5 Pro and later models, you may need to unlock the bootloader before installing the firmware, this is done via the service menu (Menu + Volume Up + Power combination when turned on).

💡

Before updating, check the checksum (MD5) of the downloaded firmware file to avoid installing corrupted software. Use programs like WinMD5Free or online services to check.

5. Checking the remote and connected devices

Sometimes the safe mode is activated not because of a system failure, but for external reasons: a faulty remote, conflicting USB-device or problem HDMI-Before you resort to radical measures, do a diagnostic:

What to check:

• 🎮 Replace your batteries or try another remote. On some Xiaomi models, prolonged button clamping can cause a forced transition to safe mode.
• 🔌 USB-Devices: Disable all flash drives, hard drives and other gadgets, and damaged files on them can block normal downloads.
• 📺 HDMI-cables: Disconnect all external devices (configures, sound bars, game consoles) signal conflict sometimes leads to activation of diagnostic mode.
• 🔌 Power: Connect the TV to another outlet or use a network filter. surges of voltage can cause crashes.

If all the devices are offline, plug them in one at a time to identify the culprit, and most often, the problem is:

• Damaged USB-flash drives with an incorrect file system.
• HDMI-devices that require a large amount of energy (for example, external tuners).
• Remotes from other devices that send false signals.

💡

In 30% of cases, the safe mode on Xiaomi Mi TV is not caused by a system failure, but by external devices.

6. Contact the service center

If none of the methods worked and the TV is still loading in Safe Mode, the problem may be related to:

• 🔧 Hardware damage: A faulty motherboard, memory or processor.
• 🔄 Loader lock: On some models (Mi) TV Q1E, Mi TV Master: Safe Mode May Be a Result of Failed Unlocking.
• 📥 Incompatible firmware: Install software from another model or region.

In these cases, self-repair can cause the TV to fail completely. Contact the official Xiaomi service center or authorized partners.

• The TV model (located on the back sticker).
• The firmware version (if seen in safe mode).
• Circumstances under which a safe mode appeared (after updating, connecting the device, etc.).

The cost of diagnostics in official Xiaomi services is usually 500-1500 rubles, repairs - from 2000 rubles (depending on the problem).

FAQ: Frequent questions about safe mode on Xiaomi Mi TV