Unlocking Redmi 7 after resetting or locking: all 2026 methods

Why Redmi 7 is blocked and what to do

Blocking Xiaomi Redmi 7 is a common problem that users face after resetting, unsuccessful upgrade or buying a used device. The main reasons are: activation of Factory Reset Protection (FRP) from Google, binding to a Mi Account, hardware failure or software conflict in MIUI. In 90% of cases, the device is blocked during the first setup stage with the requirement to enter a login / password from the previous account.

It’s important to understand that unlocking methods depend on the type of lock. For example, bypassing FRP (Google protection) and unlocking Mi Account require different approaches. In this article, current ways for 2026, including formal and informal decisions, with an assessment of risks and complexity. On Redmi 7 models with MIUI 12+ firmware and a security patch after March 2022, some methods may not work due to tighter protections.

Before you start, check:

  • 🔹 Type of lock: whether the system asks for a password from Mi Account or Google account?
  • 🔹 Version MIUI: path of adjustment → The phone. → Version. MIUI.
  • 🔹 bootloader status: whether it is unlocked (checked through fastboot oem device-info).

Method 1: Officially unlock through Mi Account

If your device is linked to a Xiaomi account, the safest way to do so is to use the official Find Device tool, which only works if:

  • 📌 You have access to email/phone-linked.
  • 📌 The device is connected to the Internet (via Wi-Fi or mobile network).
  • 📌 Find Device has been activated in the settings.

Instructions:

  1. Go to account.xiaomi.com and log in.
  2. Select the Find Device tab → find your Redmi 7 in the list.
  3. Press Unlock and confirm the action via SMS/email.
  4. Wait for notifications on the device (can take up to 5 minutes).

💡

If Find Device doesn't find the phone, try connecting it to another Wi-Fi or using mobile internet. Sometimes it helps to reboot the device with the power button clamped for 10 seconds.

⚠️ Note: If your account is not yours (e.g., a handheld phone), you cannot officially unlock it, and you will need to use alternative methods (see Methods 3-5).

Method 2: Bypassing Google FRP without a password

Factory Reset Protection (FRP) is a Google protection that works after resetting your settings if you have an account attached to your device. On Redmi 7 with MIUI 10-12, you can bypass through vulnerabilities in your settings or using TalkBack.

The algorithm for MIUI 11/12:

  1. On the lock screen, press Emergency Call.
  2. Enter #4636### → The test menu will appear.
  3. Select Usage statistics → Back → Click on the Settings icon.
  4. In the settings, go to Users & Accounts → add a new Google account.
  5. Return to setting up your device and log in through a new account.

What to do if the test menu is not opened?
On some firmware, the ##4636## code may be blocked. Alternatively, use the Volume Up + Power combination to log in to Recovery, but this does not guarantee FRP bypass.

For MIUI 13+, this method often doesn't work, and you'll need to:

  • 🔧 Use it. PC-tools (e.g. Mi) FRP Tool).
  • 🔧 Switch the device through Fastboot or EDL (see method 4).

⚠️ Attention: Bypass FRP This method can result in a 72-hour lock on your Google account if the system deems the activity suspicious.

Method 3: Unlock via Fastboot (for unlocked bootloader)

If the bootloader is on Redmi 7 It's already unlocked, you can reset the lock through Fastboot, USB-cable and basic knowledge of working with ADB/Fastboot.

Step-by-step:

  1. Install Android SDK Platform Tools on your PC.
  2. Turn off Redmi 7 → pinch Volume Down + Power to log into Fastboot.
  3. Connect the device to the PC and check the connection with the command: fastboot devices
  4. Run reset: fastboot erase frp fastboot erase userdata
  5. Reboot the device: fastboot reboot

Download Platform Tools|Install Xiaomi drivers|Enable debugging on USB (if possible)|Prepare original USB-cable|Download the firmware for your model-->

⚠️ Note: The fastboot erase frp and fastboot erase userdata commands will completely delete data from the device, including photos and apps. If the phone had important files, try extracting them first through the device. TWRP (if established).

If the bootloader is locked, you will need to unlock it through the official Xiaomi tool, which takes up to 72 hours and requires binding to a Mi Account.

Method 4: Firmware via EDL (for locked devices)

Emergency Download Mode (EDL) is a mode for firmware devices with a brick or locked bootloader. On Redmi 7, EDL can be entered through test points or short circuits on the board, which is an extreme method, since it requires disassembling the device and risks damaging the hardware.

Tools required:

  • 🛠️ Mi Flash Tool (download from official website).
  • 🛠️ Fastboot firmware ROM Redmi 7 (the version must match the region of the device!).
  • 🛠️ EDL-wire-wire.

Instructions (for experienced users!):

  1. Turn off the phone, remove the back cover and disconnect the battery.
  2. Find EDL test points (usually next to the charging connector, marked as TP).
  3. Close contacts for 5-10 seconds, simultaneously connecting USB-plug-in.
  4. The device will be called Qualcomm HS-USB QDLoader 9008.
  5. Start the Mi Flash Tool, select the firmware and press Flash.

📊 Have you ever tried to use Xiaomi through EDL?
Yeah, you.
Yeah, at the service center.
No, but I want to learn.
No, I don't plan on.
MethodDifficultyRisks.You need a PC?
Official Mi Account⭐No.No.
Bypassing FRP through settings⭐⭐Blocking of Google AccountNo.
Fastboot (unlocked bootloader)⭐⭐⭐Loss of dataYes.
EDL (testpoints)⭐⭐⭐⭐Board damage, brickYes.

⚠️ Attention: Firmware through EDL On devices with a locked bootloader, it can lead to hard-brick (complete failure). If you are not sure about your skills, contact the service center.The cost of unlocking Redmi 7 in 2026 is from 1500 to 3000 rubles.

Method 5: Using TWRP and Root Rights

If the device has customized recavators (TWRP), unlocking is easier, and this method is suitable for users who previously obtained root access or installed informal firmware.

Steps:

  1. Download to TWRP (press Volume Up + Power when enabled).
  2. Go to Advanced → File Manager.
  3. Delete files: /data/system/gesture.key /data/system/locksettings.db /data/system/locksettings.db-wal /data/system/locksettings.db-shm
  4. Reset the device.

If TWRP is not installed, you can flash it through Fastboot:

fastboot flash recovery twrp.img


fastboot boot twrp.img

💡

Installing TWRP voids the warranty and may disrupt MIUI. Once unlocked, it is recommended to return the stock Recovery.

Scripts like the FRP Bypass Tool can also be used to remove FRP via TWRP, but their effectiveness depends on the version of MIUI. Many scripts stopped working on firmware newer than MIUI 12.5.

Frequent Mistakes and How to Avoid Them

When unlocking Redmi 7, users often face typical problems:

  • 🚫 "Invalid IMEI" After firmware: occurs when the modem partition is damaged. The solution is to flash the stock firmware through the Mi Flash Tool with the Clean All tick.
  • 🚫 "Device is locked in Fastboot: it means the bootloader is locked. Official unlocking is required via Mi Unlock Tool.
  • 🚫 Cyclical reboot: usually associated with incompatible firmware. MIUI (Global/Chinese) before the firmware.

To minimize the risks:

  • ✅ Always do a backup before resetting.
  • ✅ Use original cables and ports USB 2.0 (USB 3.0 can cause firmware errors).
  • ✅ Check the hashes of downloaded firmware (MD5) conformance.

Can I unlock Redmi 7 without losing data?
Theoretically, yes, but only if the lock is connected to Mi Account and you have access to your account. Otherwise (FRP, reset) the data will be deleted. If there is important information on the phone, try retrieving it through ADB backup (if debugging is enabled) or contact the service center for the chip-off copy.
What if the phone doesn’t turn on after unlocking?
There's probably a firmware error. Try: Boot into the Fastboot and repeat the firmware. Use EDL to recover through testpoints. If the screen is black and there's no button response, it's hard-brick. You need to solder the capacity on the board or replace the firmware through the programmer.
How do I know if the Redmi 7 bootloader is unlocked?
Turn on your phone in Fastboot mode (press Volume Down + Power). Connect to your PC and execute the command: fastboot oem device-info If the answer has a line Device unlocked: true - the bootloader is unlocked. If false - locked.
Is it easy to get around FRP on Redmi 7?
Legally, the Factory Reset Protection bypass is in the grey area Google prohibits this in its terms of use, but in practice users rarely face the consequences if the device belongs to them, however: 📛 Bypass FRP on someone else’s device may be considered a violation of the law (Article 272 of the Criminal Code of the Russian Federation – illegal access to information). 📛 Google can temporarily block an account if suspicious activity occurs, and we recommend using the bypass only on its devices or with the owner’s consent.
How much does it cost to unlock Redmi 7 in the service center?
Prices in 2026: 💰 Mi Account bypass: 1000-1500 rubles. 💰 Bypass FRP: 1500–2,000 rubles. 💰 Firmware through EDL (parsing: 2500-3500 rubles. 💰 Recovery after hard-brick: from 4000 rubles.