How to Reset Xiaomi Redmi 9A to Factory Settings: The Complete Guide

Why would you want to reset the Redmi 9A?

Resetting the Xiaomi Redmi 9A to factory settings is a radical but sometimes necessary solution to return the smartphone to its original state, and the reasons for doing so can range from a trivial desire to get rid of accumulated digital debris to serious system failures, such as if the phone started to brake after a MIUI update, stuck on the logo or is sold to a new owner – a complete reset will help to return to work.

It’s important to understand that the procedure deletes all user data: photos, contacts, messages, installed apps and even account settings. However, the system files and Redmi 9A firmware remain intact. Unless you back up in advance, it will be extremely difficult to recover information — especially without root rights or specialized programs.

In this article, we will discuss three official ways to reset: through phone settings, using Recovery mode and remotely via Mi Account, and you will learn how to prepare the device for the procedure and what to do if the reset does not solve the problem.

Preparation for resetting: what to do in advance

Before you start resetting, make sure you follow all the critical steps. On the Redmi 9A, resetting through settings requires you to enter a password from the Mi Account if it was tied to the device. Without that data, you won't be able to complete the procedure in the standard way -- you'll have to use Recovery or contact a service center.

Here is the checklist of mandatory actions:

Pay special attention to backup. Redmi 9A has a built-in archiving feature in Settings → About Phone → Backup. It saves contacts, SMS, call log and some settings, but not photos or videos.

• 📁 Google Photos – Automatically uploads media files to the cloud.
• 💾 Local copying on PC via cable USB (file transfer).
• 🔄 Third-party applications like Titanium Backup (require root).

If you sell a phone, remember to log out of all accounts (Mi Account, Google, social media) and unplug the device from services like Find My Device, otherwise the new owner may face lockdown.

💡

Before resetting, check if your Redmi 9A is linked to a corporate account (e.g., via Microsoft Exchange or Samsung Knox).

Method 1: Reset via phone settings (the easiest one)

This is the standard method that works if the phone turns on and responds to touch. The interface may vary slightly depending on the version of MIUI, but the overall layout remains the same.

1. Battery charge of at least 30%.
2. Password from Mi Account if it was tied.
3. 5-10 minutes of free time (the process takes up to 5 minutes).

Step-by-step:

1. Open Settings (the gear icon on the main screen).
2. Go to the About Phone section. → Backup and reset.
3. Select Settings Reset.
4. Click Delete all data and confirm the action.
5. If requested, enter the Mi Account password or pattern lock.
6. Wait for the reboot - the phone will turn on with factory settings.

After the reset, you will be asked to configure the device as new, at which point you can restore data from the backup (if it was created) or skip the step.

Method 2: Hard Resetting with Recovery Mode

This method is useful if Redmi 9A does not turn on, hovers on the MI logo or does not respond to touch. Recovery Mode is a service mode that works even when corrupted system files.

• ⚠️ It will not work if Mi Account protection is enabled (requires data entry after resetting).
• ⚠️ Delete all data without recovery.
• ⚠️ Some firmware may require confirmation via Fastboot.

To enter Recovery:

1. Turn off the phone (press the power button for 10 seconds).
2. Press the Volume Up + Power button at the same time.
3. Hold for 5-10 seconds until the MI logo and menu appear.

Follow the instructions:

1. Select the Wipe Data button (or Wipe & Reset in newer versions).
2. Confirm the choice of the power button.
3. Select Wipe All Data and confirm it again.
4. Once you have finished, select Reboot → Reboot to System.

If the phone requires Mi Account data to be entered after the reset, and you do not remember them, you will have to contact the Xiaomi service center with a proof of purchase (check or box).

💡

Recovery does not remove the firmware, but returns all settings to factory. If the problem was in the system files (for example, after a failed update), this method may not help - you will need to flash it.

Method 3: Remote reset via Mi Cloud (if phone is lost)

If you lost the Redmi 9A or it was stolen, you can try to reset the device remotely via the Mi Cloud service, which will only work if you meet three conditions:

1. The phone is connected to the Internet (mobile data or Wi-Fi).
2. Find the device in the Mi Account settings.
3. Mi's account was not deleted from his phone.

Remote discharge instructions:

1. Go to i.mi.com and log in.
2. In the Devices section, select your Redmi 9A.
3. Press Find the device. → Erase the data.
4. Confirm the action by entering the password from the account.

Note that after a remote reset, the phone won't unlock -- the next time you turn on, you'll need to input data from Mi Account, which is a theft protection measure, and if you sold the device and forgot to unplug the account, the new owner won't be able to use it.

💡

Before resetting remotely, try to find your phone first through the Mi Cloud, which will show its last location on the map. If the device is turned off, the location will be updated the next time you connect to the Internet.

What if the reset didn't help?

In rare cases, even a full reset doesn't solve the problem, like if Redmi 9A:

• 🔄 He's fixated on the logo. MI post-discharge.
• 📵 Not included at all (black screen).
• 🔧 Recovery is a No Command error in Recovery.

In such situations, the cause is usually firmware damage or hardware malfunction.

Fastboot will require a computer, a USB cable, and the official firmware for the Redmi 9A (downloaded at MIUI Download), a process that requires knowledge and can lead to a blink (completely inoperable) of the phone when errors occur.

⚠️ If you are not sure about your skills, do not try to flash Redmi. 9A Errors when working with Fastboot or EDL This can make the phone unpatchable even in a service center.

How to avoid problems after resetting

After successfully resetting the Redmi 9A, it is important to properly configure the device to avoid repeated failures.

• 🔄 Update your firmware to the latest version through Settings → The phone. → Updating the system.
• 🔒 Do not install applications from unknown sources – this can lead to viruses or conflicts.
• 📱 Set up a backup in Mi Cloud or Google Account.
• 🔋 Calibrate the battery: discharge the phone to 0% and charge to 100% without interruptions.

If you are selling or transferring your phone to another person, follow these steps:

1. Delete everything. SIM-memory-cards.
2. In the Settings → Accounts menu, delete all linked accounts.
3. Turn off Find the Device in Mi Cloud.

To check the “cleanness” of the phone, the new owner can use the Mi Verify service, which shows the lock status of the Mi Account.

FAQ: Frequent questions about Redmi 9A reset