How to format Xiaomi Redmi 7 phone: the complete guide

Modern smartphones like the Xiaomi Redmi 7 accumulate system debris over time, start to run slower or give out software failures. In such situations, the only effective solution is a complete factory reset, or formatting, which returns the device to its original state by removing all user data, applications and cache.

Before you take any drastic action, you need to realize that formatting is an irreversible process: all your photos, contacts, messaging and installed programs will be irretrievably lost. Backup is a critical step, without which recovery will be impossible.

In this article, we’ll take a look at all the ways Redmi 7 can clean up memory, from the standard settings menu to forced resets via the Recovery Engineering Menu. You’ll learn how to properly prepare your gadget, avoid being blocked by a Google account, and what to do if the system stops booting.

Preparing the device for a complete data reset

The preparation process takes longer than the formatting procedure itself, but it's the process that determines the success of the operation. MIUI There is a built-in tool that allows you to save contacts, messages and call history on the Internet. SD-map.

Make sure that the battery charge is at least 50-60%. Interrupting the formatting process due to a dead battery can damage system files and turn the smartphone into a “brick”. SIM-microSD card and memory card so that external drives are not formatted accidentally.

⚠️ Note: If Google’s theft protection is activated on your phone (FRP), be sure to delete the Google account from the settings before resetting, otherwise, after turning on the device will require a password from the old account.

Remember to write or remember passwords from important accounts, as after the reset you will have to log in again. SIM-The card you will temporarily retrieve.

Method 1: Reset via system settings (Soft Reset)

The safest and easiest method available to every user is to use a regular settings menu, which is suitable for cases where the operating system is stable, the screen responds to touch, and you can freely navigate the MIUI interface.

To start, open the Settings app and scroll to the bottom of the list. Find About Phone and click on it. In the menu that opens, select Reset option, and then click the big red button Delete All Data. The system will alert you to the consequences and ask you to enter a graphical key or unlock password.

Once confirmed, the phone will automatically restart and start the cleaning process. The screen may display the Xiaomi logo or animation of progress. Do not interfere with the device at this point. The duration of the procedure depends on the amount of information accumulated and can take from 5 to 15 minutes.

• 📱 Go to Settings. → The phone.
• 🗑️ Select the Reset option.
• 🔴 Click the button Delete all data.
• 🔒 Enter the screen lock password to confirm.

Importantly, this method also cleans internal memory, but does not affect the system partition if it is not damaged. If there is an error during the reset process or the phone freezes, you will have to use a deeper cleaning method through Recovery.

Method 2: Formatting with Recovery Mode (Hard Reset)

If the system is not booting, the screen is not responsive to touch or the phone is stuck on the logo, Recovery Mode is used. This method allows you to perform a “hard” reset, bypassing the operating system. On Redmi 7 smartphones, this mode is entered by a combination of physical buttons.

Turn the device off completely. Then simultaneously press the volume button and the power button. Hold them until the Mi logo appears, then the power button can be released, while continuing to hold the volume. In a few seconds, the main Recovery menu will open.

The Recovery menu is controlled by volume buttons (up/down), and the choice of item is confirmed by the power button. You need to find the Wipe Data item and select it. Next, submenu will appear, where you should select Wipe All Data. The system will require confirmation, select Confirm.

⚠️ Note: When using Hard Reset through Recovery, the entire data partition, including internal memory, is cleaned.

After completing the cleaning process, which will take a few seconds, select the Back to Main Menu option, then Reboot -> Reboot to System.The phone will reboot and the initial setup will begin, as if you just bought a new device.

Deletion of accounts and protection of FRP

One of the most common problems after formatting is FRP (Factory Reset Protection) locking.This is an Android security mechanism that requires you to enter data from a Google account that was synced to the device before the reset. If you don't remember the password, the phone becomes useless.

To avoid this situation, before formatting through the Soft Reset menu, you need to manually delete accounts. Go to Settings, find Accounts and Sync (or just Accounts), select your Google account and Mi Account, click Delete Account or Sign Out.

In the case of Mi Account, this is especially important because Find Device can block the device remotely, and if the reset is already done through Recovery and the phone requires an account, the only legal way to unlock it is to remember the data or contact the service center with a check for a purchase.

Some users try to bypass this protection through special utilities, but this violates the warranty and can lead to unstable software. Data security in modern smartphones is a priority, so you should not ignore this aspect.

Solving errors in formatting

Sometimes the reset process may go wrong, such as the phone may freeze on the logo after cleaning or enter a cyclic bootloop, often due to damage to system files or lack of space for temporary update files.

If the phone doesn't turn on after Hard Reset, try resetting again, but this time, select the Wipe All Data option twice.Cache clearing may also help. From the Recovery menu, select Wipe Data, then find the Wipe Cache option (if available in your version of Recovery).

In more complex cases where the software failure is severe, it may be necessary to flash the device through the computer using the Mi Flash Tool utility.This is a more complex procedure, requiring the presence of ADB and Fastboot drivers, as well as a firmware file for a specific Redmi 7 model (codename: oncelite).

• 🔄 Try to reset again.
• 🔋 Leave your phone on the charger. 2-3 hour.
• 💻 Use Fastboot mode to flash it back.
• 🛠️ Contact the service if the phone is heated without load.

⚠️ Note: If the phone is warming up in the processor area even when it is off when connected to the PC, this may indicate a short circuit in the hardware, rather than a software failure.

Primary adjustment after reset

Once you format and reboot successfully, you'll see a welcome screen. Select an interface language and connect to a Wi-Fi network. The system will offer to restore data from a backup. If you've created a backup using Mi Cloud or Google Drive, you can return contacts and settings.

At this point, the system will also check for security updates, and it is recommended to install them immediately, as new patches often fix vulnerabilities through which attackers can access data.

Follow the instructions of the setup wizard: set up your fingerprint or facial recognition, add payment cards if necessary, and after all the steps are complete, you will get a clean, fast system ready to go.

💡

Tip: Don't install all the applications at once after the first turn on, give the system 10-15 minutes to work in the background to optimize the database and index files.

Now your Xiaomi Redmi 7 is running at the maximum performance available for its hardware. Regular memory cleaning and removing unused apps will help keep the performance going for the long term.

Frequently Asked Questions (FAQ)

💡

Properly preparing and deleting accounts before resetting will save you most of the problems with locking and data loss.