Xiaomi smartphones are some of the most popular in the world, but even they are not immune to sudden crashes.Hanging screen, overheating or software conflict can make it impossible to turn off the power button as a standard, and in such situations it is important to know emergency shutdown methods so as not to aggravate the problem and not lose data.
This article will look at all possible scenarios, from simple forced restarts to complex manipulations through recovery mode. We will look at the features for different lines β Redmi Note, POCO, Mi and even older models on MIUI 10-12. And you will learn what to do if the phone does not respond to any buttons, but the screen works β a rare case, which is not written about.
1. Standard Forced Restart (Hard Reset)
The most versatile way is hardware reboot, which runs on 99% of Xiaomi devices, which simulates battery extraction (even on non-removable batteries) and resets all temporary processes.
For most models (Redmi 9/10/11, POCO X3/F3, Mi 11/12 and later) the algorithm is the same:
- π Press the power button and the volume button at the same time.
- β±οΈ Hold them down. 10-15 Even if the screen goes out earlier, donβt let go!
- π± When the logo will appear MI or vibration, the buttons can be released.
βοΈ Checking before Hard Reset
Some devices (such as the Redmi Note 8 Pro or POCO F1) may require a power + volume combination. If it didn't work the first time, try alternative combinations:
| Xiaomi model | Button combination | Retention time |
|---|---|---|
| Redmi 4/5/6, Mi A1/A2 | Power + Volume Increase | 7-10 seconds |
| POCO X2/X3, Mi 9/10 | Power + Volume reduction | 10-12 seconds |
| Redmi Note 7/8/9 | Power + both volume buttons | 12-15 sec. |
| Mi 11 Ultra, POCO F3 GT | Power + Volume Increase (2 steps: first vibration, then logo) | 15+ sec. |
β οΈ Attention: On devices with MIUI 14+ And HyperOS forced reset can cause you to check your Mi Account the next time you turn on. If you don't remember your password, you better use other methods.
2. Shutdown via Recovery Mode (if the phone is partially working)
If the screen is responsive to touch, but the power button is not working, you can try turning off the phone via recovery mode, a method that is suitable for devices with unlocked bootloader or root rights, but sometimes works on standard firmware.
Instructions:
- Turn off your phone in the standard way (if possible) or wait for the battery to run to 1-2%.
- Press the power button + increase the volume until the Fastboot menu appears.
- With the help of volume buttons, select Recovery Mode and confirm with the power button.
- In the recovery menu, find Power Off (on some firmware β Shutdown).
What to do if you are recovering in Chinese?
On new devices (Xiaomi 13/14, POCO F5), the recovery menu can be hidden.
- π Connect your phone to a PC with the Mi Flash Tool installed.
- π₯οΈ In the command line, type: adb reboot recovery
- π± After rebooting in recovery, select Power Off.
β οΈ Warning: If the phone was unlocked via Fastboot, re-entering recovery may reset settings TWRP Or you could cause an Orange State error, and you'd need to flash it.
Emergency shutdown in case of overheating or swollen battery
If the phone is too hot (above 60Β°C) or the body is swelling, standard shutdown methods can be dangerous.
- π₯ Turn off the charge immediately (if connected).
- π§ Place the device on a non-combustible surface (ceramic tiles, metal).
- βοΈ Do not cool with ice water or refrigerator β a sharp temperature drop can damage the screen!
- π If the battery is swollen, do not try to turn on the phone - this is a risk of fire.
For emergency shutdown:
- If the screen is running, call the battery settings via the notification panel and select Emergency Shutdown (available on MIUI 12+).
- If the phone is unresponsive, use a button combination (see section 1), but hold them until the vibration is completely turned off (a sign of the discharge of the capacitors).
π‘
On the models POCO F1 and Mi 8 when overheating, an automatic shutdown at 65 Β° C. If the phone does not turn off itself - this is a sign of a malfunction of the temperature sensor.
After cooling down (at least 2 hours), check the battery:
- π If the case is deformed - do not turn on the device and contact the service.
- β‘ If the phone is turned on but discharges quickly, use the AccuBattery app for diagnosis.
4. Software shutdown via ADB (for advanced users)
If the phone is responsive to a PC connection but not switched off with buttons, you can use Android Debug Bridge (ADB), a method that requires pre-configuring debugging over USB, but works even when the screen is getting stuck.
Step-by-step:
- Install ADB Tools on your PC.
- Connect your phone to your computer via USB (use the original cable!).
- Open the command prompt (Win + R β cmd) and type: adb devices If the device is determined, continue. If not, check the drivers or cable.
- Execute the shutdown command: adb shell reboot -p
If the team doesnβt work, try an alternative:
adb shell input keyevent 26 # power button simulation
adb shell input keyevent 3 # Shutdown confirmationπ‘
ADB-Teams only work if previously debugging was included USB It's not useful on locked phones.
For devices with MIUI 13+, you may need to unlock OEM Unlock in the settings, if ADB does not recognize the phone:
- π Try another one. USB-port (preferably) USB 2.0).
- π Restart your PC and phone.
- π₯ Install Mi drivers PC Suite from the official website.
5. Offline through service codes (hidden menus)
Xiaomi hides several service commands that allow power control to bypass the standard interface, which work even on got stuck phones if the screen responds to touch.
Major teams:
- π ##4636## β Battery information β Turn it off (works on) MIUI 10-12).
- π’ ##7780## β Resetting (does not delete data but turns off phone).
- π ##3644633## β Battery test with shutdown option (for Redmi) 5/6/7).
On the newer models (Xiaomi 12/13, POCO F4), these codes can be blocked.
- Open the Phone app.
- Enter ##0011# (network testing menu).
- Press Menu (three dots) β Shutdown.
β οΈ Warning: Service codes can reset network settings or activate diagnostic mode. Do not use unknown combinations - this can lead to loss of IMEI!
6 What to do if nothing works: extreme measures
If the phone doesn't respond to the buttons, if it doesn't respond to ADB, if it doesn't turn off service codes, then radical methods remain. They should only be used in desperate situations!
Method 1: Battery discharge up to 0%
- π Shut down all cables.
- β³ Leave the phone on. 12-24 hourly (depending on the model).
- π After full discharge, connect to charging - sometimes it resets the suspended processes.
Method 2: Hardware reset (only for power users!)
On some models (Redmi 4X, Mi 5) you can turn off the power, briefly closing the contacts of the battery.
- Remove the back cover (if removable).
- Disconnect the battery plume for 10-15 seconds.
- Connect back and try to turn it on.
Hazards of hardware discharge
Method 3: Contacting the Service
If the phone:
- π₯ Overheating to a hot state.
- π₯ Smells like smoke or smoke.
- π§ It has traces of oxidation on the board.
Do not attempt to turn it off yourself, contact your Xiaomi Authorized Service Center or Electronics Repair Workshop immediately.