How to turn on Xiaomi TV without remote: all the ways from buttons to smartphone

Lost the remote from Xiaomi Mi TV or it suddenly stopped working? Don't panic - turn on the TV without the original remote can be at least 7 different ways. In this article, we will analyze all the current methods: from hidden mechanical buttons on the body to control from a smartphone or computer. It is important to understand that the choice of method depends on the model of your Xiaomi TV and its technical condition.

The current Mi TV 4/4A/4S/5 and newer series support most of the methods described below, while older models (such as the Mi TV 2) may have limited capabilities. We will also show you how to avoid the typical errors when connecting alternative control devices and what to do if the TV does not respond to commands at all.

1. Mechanical buttons on the TV body

All Xiaomi TVs (except some ultrathin models) feature hidden mechanical control buttons, located on the bottom or side panel of the case, and usually hidden under a plastic cap or rubber plug, and can be found by small indentations or pictograms.

On most models (Mi TV 4A 32"/43", Mi TV 4S 50", etc.) the buttons perform the following functions:

• 🔘 Power button – one short press turns on/off the TV, long (5)+ seconds) - forced discharge
• 📺 Source button – switching between HDMI, USB, TV-antenna
• ⚙️ Menu button – call the main settings (works only when the TV is turned on)
• 🔽/🔼 Volume/channel buttons – adjusting sound and switching programs

To turn on the TV:

1. Inspect the lower frame of the case - look for a small hole or protrusion with a pictogram ⊙ (feeding).
2. Use a paper clip, toothpick or a special plastic pin (comes with some models).
3. Press once, the TV should turn on. If there is no reaction, try holding the 3-5 second button.

⚠️ Attention: On Mi models TV Q1/Q2 mi TV 6 The mechanical buttons can be replaced by touch buttons, in which case the touch must be sure, but not strong - excessive pressure can damage the panel.

2. Control by smartphone (Mi Remote)

If the mechanical buttons don't work or they don't, the most reliable way is to use your smartphone as a remote, and the official Mi Remote app (available for Android and iOS) will do that, and it supports all Xiaomi TV models, including the older series, and allows you not only to turn on/off the TV, but also to fully control it.

Instructions for setting:

1. Download Mi Remote for Android or iOS.
2. Connect your smartphone and TV to the same Wi-Fi network (a prerequisite!).
3. Launch the app and select Add Device → TV → Xiaomi.
4. Follow the instructions on the screen – the app will automatically find your Mi TV.
5. After connecting, click on the power button in the application - the TV will turn on.

💡

If you don't have Wi-Fi access, but you have a router that has WPS enabled, you can connect your TV to the network without entering your password. To do this, click the WPS button on the router, then on your TV, select Settings → Network → Connect via WPS.

3.Use of USB-keyboard

Few people know, but Xiaomi TVs based on Android TV (All models except the earliest support the connection USB-It allows you not only to turn on the TV, but also to control it completely, and it's especially useful if the remote is lost and the smartphone is not on hand.

What you need:

• 🖥️ USB-keyboard (wired or wireless with USB-receiver)
• 🔌 USB-hub (if there are few or busy TV ports)
• ⚡ Power supply for the keyboard (if wireless and discharged)

Step-by-step:

1. Connect the keyboard to USB-TV port (usually located on the side or back).
2. Press any key – the TV should turn on automatically (if it was in sleep mode).
3. If the TV is turned off completely, turn it on with a mechanical button first, then plug in the keyboard.
4. To control use: Esc – return a step back Enter – select the Arrows menu item ↑↓←→ — navigation Win (or Fn)+P - on/off (on some models)

⚠️ Attention: On Mi models TV 4A (2018 and older) USB-The ports can be turned off in standby mode, in which case, first turn on the TV with a mechanical button, then plug in the keyboard.

Check compatibility (most of the time) HID-keyboards are working)|Use it. USB-hub|Connect the keyboard before the TV is turned on (for some models)|Check battery power (for wireless devices)-->

4. Control over HDMI-CEC (if other devices are connected)

HDMI-CEC technology allows you to control multiple devices through a single remote control. If your Xiaomi TV has a console (such as a Xiaomi Mi Box), a gaming console or a Blu-ray player, you can turn on the TV from their remote control, the feature works on all Mi TV models released after 2017.

How it works:

• 🎮 Connect the device to the TV through HDMI (For example, Xiaomi Mi Box S).
• 🔄 Make sure that the function HDMI-CEC included in the settings of TV: Settings → Devices and accessories → HDMI-CEC → Turn it on.
• 📺 Turn on the connected device (for example, the console) – the TV will turn on automatically.
• 🎛️ Now you can manage the basic features of Xiaomi TV console.

List of devices compatible with HDMI-CEC for Xiaomi TV:

• 📦 Xiaomi Mi Box S / 4K — full-time
• 🎮 PlayStation 4/5 — turn on and volume control
• 🖥️ NVIDIA Shield TV — magistrate
• 💿 Blu-ray players Sony/Panasonic — basics

5. Incorporation through a local area network (by IP-address)

If your Xiaomi TV is connected to Wi-Fi or Ethernet, you can turn it on remotely from your computer or smartphone by sending a special command over Wake-on-LAN (WoL) protocol, which works even if the TV is turned off, but requires pre-configuration.

Instructions for Windows:

1. Find out. MAC-Address of your TV: Settings → On TV. → State of the network → MAC-address
2. Download a program to send WoL packets, such as Depicus Wake On Lan.
3. Enter. MAC-TV address and send the package.
4. The TV should turn on within 10-30 seconds.

For Android, you can use the Wake On Lan app. Important: the Wake-on-LAN function should be enabled in the settings of the TV (on some models it is activated by default).

⚠️ Attention: On Mi models TV 4A (2018) and older WoL can be disabled to save power. To activate it, go to Settings → Network → Advanced settings → Wake-on-LAN.

6. Alternative remotes: universal and homemade

If none of the above methods work, you can use a universal remote or even make one yourself.Universal remotes (such as Xiaomi Mi Universal Remote or BroadLink RM4 Pro) support most Mi TV models and are customizable in minutes.

How to set up a universal remote:

• 📱 Buy a remote with Xiaomi support TV (Like, one for all. URC 7940).
• 🔍 In the instructions, find the code for your model (for example, for Mi). TV 4A It could be 0145 or 0037).
• 🔄 Follow the remote programming instructions (usually you need to hold Setup, enter code, and press Power).
• 📺 Check the work – if the TV doesn’t respond, try another code from the list.

Homemade remote based on Arduino or ESP8266:

List of proven universal remotes for Xiaomi TV:

7. Hardware reset (if the TV is not turned on at all)

If Xiaomi TV doesn’t respond to any of the ways, there may have been a software failure, in which case a hardware reset will help, which will return the TV to factory settings, but delete all installed apps and accounts.

Resetting instructions:

1. Turn off the TV (take the plug out of the socket).
2. Press and hold the mechanical power button on the body.
3. Without releasing the button, connect the TV to the network.
4. Hold the button for another 15-20 seconds until the Xiaomi logo or recovery menu appears.
5. In the recovery menu, select Wipe data/factory reset (use volume buttons for navigation and power button for confirmation).
6. After resetting, the TV will restart and turn on in standard mode.

⚠️ Attention: On Mi models TV Q1/Q2 mi TV 6 hardware reset may block access to certain features (e.g. Google Play) before reauthorizing. → On TV. → Update of the PO.

💡

Hardware reset is a last resort, and before you do it, try all the other ways to turn it on, and after you reset, you'll need to reconfigure your Wi-Fi, accounts, and apps.

FAQ: Frequent questions about enabling Xiaomi TV without remote control