The Xiaomi Redmi Note 7 (codenamed lavender) is still a popular budget smartphone, but its potential is only revealed with root rights: users get control of system files, the ability to remove embedded MIUI applications, optimize performance and even install custom firmware. However, the process of getting root on Xiaomi devices is not just “push the button and ready”: it requires unlocking the bootloader, working with fastboot, and understanding the risks.
In this article, we will discuss the current methods for obtaining root rights for the Redmi Note 7 for 2026, including preparing the device, unlocking the bootloader through the official Mi Unlock tool, installing a custom TWRP recap and Magisk firmware. We will pay special attention to typical errors (for example, Anti-Rollback), how to circumvent them and security measures. If you are a beginner, do not miss sections on backup and possible consequences: from loss of warranty to the “brick” of the device.
Why is rooting on Redmi Note 7 still relevant in 2026?
Despite the release of new models, Redmi Note 7 continues to be used thanks to reliable hardware: Snapdragon 660 processor, 3/4 GB of RAM and battery for 4000 mAh. Root-rights allow:
- 🚀 Remove system debris: pre-installed applications MIUI (For example, com.miui.analytics, which eat resources and collect data.
- 🔋 Optimize the battery: disable background processes via Greenify or Battery Guru, increasing the time of operation on the battery. 15-20%.
- 🎯 Overclock performance: change the task scheduler (schedutil) or processor frequency via Kernel Adiutor.
- 🔓 Bypassing restrictions MIUI: For example, enable Call Recording or activate VoLTE on unofficial firmware.
In addition, root provides access to tools such as Titanium Backup (backup of data applications), AdAway (blocking ads at the system level) and ViPER4Android (fine audio setting).However, remember: since MIUI 12.5, Xiaomi has tightened protection against modifications, and improper actions can lead to the activation of the Anti-Rollback (ARB) mechanism, which locks the device permanently.
Preparation of the device: what to do before unlocking
Before you start unlocking the bootloader and getting root, follow the mandatory steps. Ignoring them can lead to data loss or a “brick” (inoperability) of the smartphone.
⚠️ Warning: Unlocking the bootloader resets the device to factory settings. All data (photos, contacts, messages) will be deleted. If you don't back it up, it won't be possible to restore it.
- 📱 Check the model and version MIUI: Go to Settings. → Make sure you have a Redmi Note 7 (lavender) and not a Note 7 Pro (violeta). MIUI must be at least 12.0.3.0 (Android 10) – on older firmware, problems with Anti-Rollback may occur.
- 🔒 Link your Mi Account: you can't unlock it without it. Go to Settings. → Xiaomi account and log in. make sure that the account is free of restrictions (for example, it is not blocked for suspicious activity).
- 💾 Download the required files: Official Mi Unlock Tool (version no lower than 5.5.224.30). TWRP For lavender (choose the version for your firmware!) The latest version of Magisk (at the time of writing — v26.4).
- 🔧 Install drivers: you will need drivers to work with fastboot ADB mi PC Suite.
Backup your data to a PC or cloud
Check the device model (lavender)
Update MIUI to the latest stable version
Link Mi Account and enable synchronization
Download Mi Unlock, TWRP and Magisk
Install ADB and Mi PC Suite drivers
Charge your phone at least 60%-->
We also recommend disabling all protections on the device:
- Go to Settings → Password & Security → Device Protection and turn off Find My Device.
- In Settings → Additional → For developers, activate USB Debugging and OEM Unlock (this item may be hidden if the device is not tied to your Mi Account).
Unlock the bootloader with the Mi Unlock Tool
This is the most critical stage: without the unlocked bootloader, you can not install TWRP or Magisk. Xiaomi officially allows you to unlock the bootloader, but the process can take up to 720 hours (30 days) due to the “wait period.” Here is how it works:
- Activate Developer Mode: Go to Settings → About Phone and 7 times click on the MIUI Version. Return to the main settings, the Developer Item will appear.
- Link the device to your account: in Settings → Xiaomi Account → Mi Cloud, enable Sync and Find the device. Then in For Developers, activate Mi Unlock Status and connect the account.
- Connect your phone to your PC in fastboot mode: adb reboot bootloader or turn off the device and press Power + Volume Down.
- Launch Mi Unlock Tool on behalf of the administrator, log in and follow the instructions. If a message appears, Couldn't unlock. Wait for 168/720 hours is normal: Xiaomi keeps you waiting.
Important: If you see a Current account error is different from the account info on the device, then the account on the phone and Mi Unlock are not the same.
- Untie your account in Settings → Xiaomi account.
- Reboot the phone.
- Sign in with the same account as the Mi Unlock Tool.
What if Mi Unlock can’t see the device?
| Mistake in Mi Unlock | Reason. | Decision |
|---|---|---|
| Couldn't unlock. Wait for 168 hours | First account binding | Wait 7 days, try unlocking again |
| Current account is different... | Account mismatch | Re-link/re-link the account |
| Device is locked. Unable to unlock | The device is not tied to the account | Activate Mi Unlock Status in Settings |
| Network error | Problems with the Internet or servers Xiaomi | Use a VPN (e.g. China) or repeat later |
Installation of TWRP and Magisk firmware
Once the bootloader is successfully unlocked, you can start installing a custom TWRP recavator and getting root through Magisk. This process requires accuracy: an error at any stage can lead to a bootloop or an Anti-Rollback activation.
⚠️ Note: Redmi Note 7 with firmware newer MIUI 12.0.2.0 (Android 10) Installation of the old TWRP It will call the Anti-Rollback and lock the device permanently!
Step 1: Installation of TWRP
- Download the current one. TWRP for lavender, for example, twrp-3.7.0_9-0-lavender.img).
- Move the file to a folder from fastboot (usually C:\platform-tools).
- Connect your phone in fastboot mode and execute the command: fastboot flash recovery twrp-3.7.0_9-0-lavender.img
- Immediately after the firmware reboot to TWRP: fastboot boot twrp-3.7.0_9-0-lavender.img
Step 2. Magisk firmware
- In TWRP, select Advanced → ADB Sideload.
- On PC, run: adb sideload Magisk-v26.4.zip
- Once installed, reboot to the system. If the phone has been stuck on the MI logo for more than 10 minutes, you have a bootloop.
💡
If after firmware Magisk phone does not boot, try flashing Disable_Dm-Verity_ForceEncrypt.zip through TWRP. This will disable system integrity checks, but will reduce security.
Step 3: Root rights verification
Once you have downloaded the system, install the Root Checker and run the check. If everything goes well, you will see a message Root access properly installed!
Typical errors and their solutions
Even with the correct instructions, users often face problems, and here are the most common ones and ways to fix them:
- 🔄 Bootloop (Cyclical Boot): Reason: Version Incompatibility TWRP/Magisk Firmware or system file corruption Solution: flash stock ROM Using the Mi Flash Tool Clean All.
- 🔒 Anti-Rollback (ARB): Reason: Trying to roll back to an older version MIUI ore-fix TWRP. Solution: There is no official way around ARB Redmi Note 7: The only way out is to flash the firmware with support for your version ARB (for example, ARB 4 for MIUI 12+).
- 📵 Phone doesn't turn on after firmware: Reason: interrupted firmware process or wrong fastboot command.Solution: try clamping Power + Volume Up for 20 seconds for forced reboot. If it doesn't work, stitch stock. ROM.
💡
After receiving root, the phone stopped seeing SIM-maps, stitch the module IMS It's a common problem on custom cores.
What to do after getting root?
Now that you have root rights, you can start optimizing the Redmi Note 7. Here are some useful steps:
- 🧹 System Cleanup: Remove unnecessary system applications using Titanium Backup or System App Remover (e.g. com.miui.analytics, com.xiaomi.midrop). TWRP (Advanced → Wipe Dalvik Cache).
- ⚡ Performance optimization: Install Kernel Adiutor and change the task scheduler to cfq for smooth interface. disable animations in Settings → For developers (set the scale of animation on the 0.5x).
- 🔒 Security: Disable DM-Verity (system integrity check) via Magisk to avoid bootloop after updates.Install AFWall+ to control network traffic of applications.
We also recommend that you install:
- ViPER4Android – to improve sound through equalizer settings.
Remember: with root rights, you lose the ability to receive OTA-update MIUI. To update the firmware, you will have to manually download stock. ROM slice through TWRP Or Mi Flash Tool.
How to return everything back (root rollback and bootloader lock)
If you need to return your phone to its original state (for example, for sale or warranty repair), follow the following steps:
- Delete Magisk: Open the Magisk app, go to Settings → Complete Delete. Reboot your phone.
- Fastboot flash recovery: fastboot flash recovery recovery_stock.img (file recovery_stock.img You can get it from the official firmware).
- Return stock firmware: Download stock ROM for your model from the official website. Sweat through the Mi Flash Tool in clean all mode.
Lock the loader.
fastboot oem lock⚠️ Attention: Locking the bootloader erases all data and returns the Anti-Rollback to its original state. ARB, The blockage may lead to a "brike"!
After this, the phone will return to factory condition, and you will be able to use it. OTA-However, please note that the fastboot unlock counter (Device is unlocked) will remain, and this can be seen when you diagnose it at the service center.