How to Get Out of Xiaomi Redmi 4X Fastboot: The Complete Guide

When the screen of the Xiaomi Redmi 4X smartphone suddenly lights up with a logo with a hare fixing an android, users are often taken by surprise: This is the Fastboot mode, which is designed for low-level interaction with the device, but in the hands of the average owner causes panic. The device ceases to respond to touch, and the standard boot of the operating system does not occur, creating the illusion of failure.

In fact, getting into this mode doesn't always mean a critical hardware malfunction, most often it's a random button clamping in your pocket or a failure when you update your system, and understanding what exactly happened to your gadget is the first step to successfully restoring it to work without going to a service center.

In this tutorial, we will take a look at all the existing methods for exiting bootloader mode for the Redmi 4X model, learn how to use software tools like ADB, how to use combinations of hardware buttons, and what to do if a software failure has developed into a more serious firmware problem.

Reasons to Get Fastboot Mode on Redmi 4X

Before you start resuscitating the device, you need to understand the nature of the problem. Fastboot mode on Xiaomi smartphones is activated when booting if the system detects critical errors or receives a corresponding signal from the user. The most common reason is mechanical impact. owners of Redmi 4X often note that the phone falls into this mode after wearing in a narrow pocket of jeans, where the volume buttons could be pinched.

A more serious cause is the failure to update the MIUI operating system. If the process of writing new system files was interrupted due to battery discharge or unstable connection to Wi-Fi, the bootloader can block the normal start by going into emergency mode, and this can also be caused by experiments with root rights or installing modified bootloaders (recovery), which conflict with the original firmware.

Sometimes it's a software failure caused by incompatible applications or viruses, in which case the phone can reboot cyclically, each time it's on the menu with a hare, and it's important to note that if the device was reset to factory settings shortly before the incident, the likelihood of a software conflict increases dramatically.

• 🐰 Accidental clamping of the volume button when turning on the phone.
• 📉 Interrupted system update MIUI surge.
• 🔧 Attempt to install a custom recavéri or ROOT-rights.
• 💾 Damage to system files by third-party applications.

The easiest way: hardware restart

In the vast majority of cases, especially if the problem is caused by accident, to exit from the Fastboot on Redmi 4X, it is enough to perform a forced reboot. This method does not require a connection to a computer or special knowledge.

Press the Power button and hold it for a long time. The standard short press here will not work, because in bootloader mode the logic of the buttons is changed. You need to hold the Power button for about 10-15 seconds until the screen goes out. Once the display turns black, release the button immediately.

💡

If the phone vibrates but the screen does not go out, try to press the power and volume buttons simultaneously on the phone. 10-15 It emulates the battery removal.

Once the screen is out, the device should vibrate and start the standard procedure for loading the Mi logo. If this did not happen and the phone returns to the image of the hare again, then the software error is deeper, or the volume button is physically stuck. In this case, it is worth checking the button mechanics: does the volume reduction key fall off, since it is responsible for entering this mode.

Sometimes a combination of volume buttons helps, try to hold the Volume Down button and Power for 10-15 seconds at the same time, which forcefully resets the power controller and can help you get out of the freeze if the usual one-button method doesn't work.

Exiting through a computer using ADB

If hardware methods fail, software tools come to the rescue. ADB (Android Debug Bridge) debugging interface allows you to send commands directly to the device boot. For Redmi 4X, this is one of the most reliable ways, since it works even when the operating system is not booting, but the Fastboot drivers are installed correctly.

First, you will need a Windows computer, original or high-quality. USB-cable and drivers installed for Xiaomi. If you don't have a ready-made toolkit, you can download the Minimal package. ADB and Fastboot. Connect your Fastboot phone to your PC. In Windows Device Manager, under Controllers USB" Or Android Device should appear with a device called Android or Xiaomi, often with a yellow exclamation point if the driver didn’t stand up automatically.

Open the command prompt (cmd) in the folder with the ADB utility. Enter the command to check the connection:

fastboot devices

If you see your device's serial number, you've got the connection, and you need to send a command to reboot, and you type the following code and press Enter:

fastboot reboot

Once the command is executed, the phone should immediately restart. If nothing happens in response to the fastboot reboot command or an error message appears, the bootloader partition may be damaged. In this case, enter the fastboot continue command, which will forcibly try to continue booting the system, ignoring some checks.

💡

The fastboot reboot command is a standard way to exit the mode, it is safer for data than complete reflashing.

Use of the Mi Flash Tool

The official tool from the manufacturer, the Mi Flash Tool, is designed for smartphone firmware, but it can also be used as a diagnostic and recovery tool. If the Redmi 4X does not leave the Fastboot with standard methods, this utility will help you understand whether the computer sees the device at a deep level and whether the memory is intact.

Download and install the latest version of the Mi Flash Tool on your computer. Run the program on behalf of the administrator. Connect the phone in Fastboot mode to the computer. USB-Press the Refresh button in the program interface, and if a device with its serial number appears on the list, then communication with the processor has been successfully established.

You don't have to look for firmware right away to flash, and the fact that it sees the phone is a sign that the interface is working. But if you want to go to the firmware, and you don't want to reinstall anything, you can just use the clean button, but it's risky. The safer option with this utility is to use it as an indicator. ADB It does not work, the problem may be in the driver version or USB-port.

It’s worth remembering that using the Mi Flash Tool with the Clean All option will completely remove all data from your phone. If your goal is just to exit the menu, avoid the Flash button until you’re ready to lose photos and contacts. Use the program only to diagnose the connection.

What to do if the phone goes into a reboot cycle

Sometimes, after trying to exit the Fastboot, Xiaomi Redmi 4X gets into an endless reboot cycle known as bootloop. The screen goes out, the Mi logo appears, then the rabbit again, and so on indefinitely. This indicates that the system files are so damaged that normal booting is impossible, but the bootloader itself is functioning.

In this situation, the only way out is to completely reflash the device. You will need to download the current firmware version for your particular model (Redmi 4X is codenamed prada) from the official website. It is important to choose Recovery ROM (zip archive) if you plan to update through the Recovery menu, or Fastboot ROM (tgz archive) if you use the Mi Flash Tool.

The Fastboot ROM flashing process is as follows: unpack the firmware archive to the root of the C disk so that the path is short (e.g., C:\rom). Open the Mi Flash Tool, press Select and specify the folder with the unpacked firmware. Make sure you select Clean All mode (for clean installation) or Save User Data (attempt to save data, but doesn't always work during cycles). Press Flash and wait for the process to finish, which will take 200-500 seconds.

⚠️ Note: Do not disconnect the cable during the firmware. USB and don't turn off the computer. 98-99% This can cause irreversible damage to the boot sector, after which the phone will be extremely difficult to restore even in the service.

If the flashing doesn't work and the phone keeps going to the Fastboot, the problem may be in the hardware. On the Redmi 4X, there's a problem with the volume button's outlet plume or the contact oxidation on the board after moisture hits, in which case the software methods are powerless, and it requires disassembling the device to check the plumes.

Prevention and Frequently Asked Questions

To avoid a repeat of the situation, it is recommended to check the state of the volume buttons. If they have a backlash or stick, they are better replaced. Also, do not neglect to regularly update the system through the standard menu, as new versions of MIUI often contain corrections for bootloader errors.

Below are the answers to the most popular questions of users who have faced this problem.

⚠️ Warning: If you see the status of "Locked" on the Fastboot screen, it means that the bootloader is closed. Attempting to unlock it (Unlock) without unlocking it through the Mi Account site will lead to a complete data cleanup.