You turned on the Xiaomi Mi TV TV smartphone Redmi/POCO, But instead of the usual desktop on the screen flaunts a mysterious inscription. RST? Don't panic - this is not a fatal breakdown, but a signal from the system that it needs to be reset or restored. 90% In cases, the problem can be solved without contacting the service center, if the cause is correctly identified.
abbreviation RST (Reset indicates that the device is in a factory reset or firmware recovery mode, most often after a software update fails, power failure, or software conflict:
- 🔍 What exactly does it mean? RST on different Xiaomi devices (TVs, smartphones, tablets)
- 📱 The main reasons for the appearance – from banal to critical
- ⚙️ Step-by-step instructions for exiting the mode RST for each type of device
- ⚠️ What can not be done to avoid aggravating the situation
We will pay special attention to hidden nuances that are not written about in official manuals – for example, how to distinguish a real reset from a fake (when the screen simulates a fake). RST, If your Xiaomi is stuck on this screen, read on.
1. What is it? RST Xiaomi: Technical Decoding
Inscription RST — It is short for Reset, but in the context of Xiaomi, it has three possible meanings depending on the context:
- Recovery Mode – The device is waiting for a command to reset or install the firmware via Fastboot.
- Emergency Stop – the system detects a critical error (e.g. partition damage) /system) and blocked the download.
- Fake screen – a virus or malware mimics RST, to block access (more commonly found on smartphones).
On Xiaomi Mi TVs TV (series A2/A Pro, P1, Q1/Q2) screen RST usually appears after:
- 🔌 Abrupt power outage during firmware update
- 🖥️ Failed firmware through USB (For example, if the firmware file is damaged)
- 🔄 Failure in the work of eMMC memory (typical for models 2018-2020 years)
On smartphones (Redmi Note, POCO, Mi) RST more often:
- 📱 Attempting to unlock the bootloader with an error
- 🔧 Install custom firmware (for example, LineageOS) without proper preparation
- 🦠 Infection with a download-blocking virus (e.g. Android.Triada)
Causes of occurrence RST: harmless to critical
To fix a problem properly, you need to understand the source of the problem, and we've put together all the possible causes in a table, from the simplest to the ones that require the intervention of the service center.
| Reason. | The device | Probability (%) | Can I fix it myself? |
|---|---|---|---|
| Interrupted firmware update | Televisions, smartphones | 60% | Yes. |
| Power failure (disconnection from the socket) | Televisions | 25% | Yes. |
| File System Damage (eMMC) | Smartphones 2018-2021 | 10% | Partially. |
| Viral blockage | Smartphones with root rights | 3% | Yeah (needs antivirus) |
| Hardware breakdown (memory controller) | All devices. | 2% | No. |
The most common situation is an interrupted update. For example, you updated your Mi TV. TV Q1 through USB, But suddenly we disconnected it from the outlet, and the system didn't have time to write new files, and now the device is "hanging" in the reset mode, in which case a forced reset via Recovery will help.
Much less often. RST It's caused by hardware problems, like the Redmi Note. 8/9 The eMMC memory controller often fails, resulting in a cyclic reboot with the screen RST. There is no need to replace the chip.
⚠️ Attention: If RST appears after a device drops or moisture gets in, do not try to reset the settings - this can lead to complete loss of data.
3. How to clean up RST on the Xiaomi Mi TV TV
If it's written RST She appeared on television (Mi). TV 4A, 4S, A2, P1, Q1/Q2), Follow this instruction. The methods vary depending on whether the remote is responding to commands.
Method 1: Soft reset (if the remote is working)
Press Settings (⚙️) → All settings → The device → Reset to factory settings
Confirm the reset (default password is 1234 or 0000)
Wait for the reboot (5-10 minutes)
Do not turn off power during the process!-->
If the TV is reset again, RST, move on to hard reset.
Method 2: Hard reset via Recovery (if the remote does not work)
- Turn off the TV for 30 seconds, then plug it back in.
- Immediately after turning on, press the Menu button on the remote (⋯) + Back up (←) 10-15 seconds.
- In the Recovery menu, select Wipe Data/Factory Reset (use volume buttons for navigation, OK for confirmation).
- After reset, select Reboot System Now.
If the Recovery menu doesn't appear, it means the firmware is damaged. USB.
How to Switch Xiaomi TV Through USB?
⚠️ Note: If you have a TV set after the TV It doesn't turn on or flashes a red light, it's a sign of damage to the bootloader. It's impossible to fix this on its own, it requires a programmer and experience with Fastboot.
4. Correction. RST on smartphones Xiaomi (Redmi, POCO, Mi)
On smartphones, the algorithm of actions depends on whether you see the Recovery menu or the screen just flashes/reboots.
Step 1: Trying to log in to Recovery
Turn off the phone (if it doesn’t respond, press the power supply). + Volume up for 15 seconds. Then:
- Press Power + Volume up until the Mi logo appears.
- Let go of Meals, but keep Volume up until the Recovery menu appears.
If instead of the menu you see a black screen with the inscription RST, It could mean:
- 🔴 Recovery section damaged – you need to flash through Fastboot.
- 🔴 bootloader is blocked (if you tried to unlock Bootloader).
- 🔴 Viral attack – requires firmware of a clean version MIUI.
Step 2: Fastboot Firmware (if Recovery is not available)
You will need a computer with installed Xiaomi drivers and the Mi Flash Tool program.
Download Fastboot ROM For your model from the official website
Install Xiaomi drivers (use Mi) PC Suite)
Unpack the archive with firmware in a folder without Cyrillic
Launch the Mi Flash Tool on behalf of the administrator-->
Next:
- Transfer the phone to Fastboot mode: pinch Power + Volume down.
- Connect to the PC, in the Mi Flash Tool, select the folder with the firmware.
- Press Refresh, then Flash (select Clean All option).
- Wait until the end (10-20 minutes).
⚠️ Note: If the phone is installed after the Redmi/POCO If you don't turn on or show an Anti Rollback error, you've installed firmware older than the current version. EDL-Mode (requires an authorized Xiaomi account).
5. RST Viruses: How to Recognize and Eliminate
In rare cases, screen RST It can be fake, it blocks Android from downloading and shows a false reset message. RST can be found on the following grounds:
- 🛡️ Inscription RST Appears after downloading the Mi logo (the present one) RST appear before).
- 📱 The screen responds to touch (real) RST — only on the volume/power buttons).
- 🔗 There are links or payment requirements on the screen (100% virus!).
If you suspect a virus:
- Try booting into Safe Mode: pinch the Power, then long tap on "Switch off" → "Restarting in Safe Mode".
- If you can, remove suspicious apps (especially those with administrator rights).
- Install Malwarebytes or Dr.Web and scan the device.
If safe mode is not available, only complete flashing remains (see section 4).
💡
After removing the virus, be sure to change the passwords from your Mi Account and Google account – some viruses steal authorization tokens.
Hardware causes RST: when to carry on service
If all the software methods have been tried, but RST It's a problem, but it could be the hardware:
| Malfunction | Symptoms | Xiaomi models at risk |
|---|---|---|
| Damage to eMMC memory | Cyclical reboot, RST appears 1-2 seconds after activation | Redmi Note 8/9, Mi 9T, POCO X3 |
| Failure of the power controller | The TV/smartphone does not respond to the power button, but RST flashing | Mi TV 4S 55", Redmi Note 7 |
| Oxidation of motherboard contacts | RST appears after falling or getting moisture | All models. |
The most common hardware problem is the death of eMMC. This is due to:
- 🔥 Overheating (for example, if the smartphone was constantly used for gaming).
- ⚡ Frequent power outages during data recording.
- 🕒 Natural wear (eMMC in budget models is designed for the ~3-5 years of active use).
The service center will offer you:
- 🔧 Replacement of the eMMC chip (cost: 3-8 thousand rubles. depending on the model).
- 🔄 Power Controller Replica (Relevant for TVs).
- 💾 Data recovery (if you need to save photos/files).
⚠️ Attention: If you are offered to "swipe the device for 500 rubles." without diagnosis, this is fraud!
7. Prevention: how to avoid the appearance RST future
Not to be confronted with the screen anymore. RST, follow these rules:
- 🔌 Do not turn off power during firmware updates (even if the process is “hanging").
- 📥 Download firmware only from the official Xiaomi website (not from forums!).
- 🔒 Do not unlock the bootloader if you are not sure of your actions.
- 🛡️ Install an antivirus (e.g. Bitdefender) if you install it frequently APK source.
- 🔋 Use an uninterruptible power supply for TVs (especially during thunderstorms).
For Xiaomi TVs, we also recommend:
- 📺 Update your firmware at least 1 time every 3 months (via Settings) → On TV. → Update of the PO).
- 🔄 Do a factory reset 1 time per year (this clears the cache and prevents crashes).
💡
If you have already seen Xiaomi before RST, Make a backup copy of the data (Settings) → Additionally. → Backup. If you crash next, you can quickly restore the system.