What to do if Xiaomi is hanging: a complete troubleshooting guide

Xiaomi’s smartphone freeze is one of the most common problems faced by users of the brand’s devices, and symptoms can vary from brief interface hangs to a complete screen freeze, where the phone does not respond to touch or buttons, most often due to overloaded memory, conflicting applications or firmware errors, but in some cases, the cause lies deeper — in hardware malfunctions.

In this article, we'll look at all the possible scenarios why Xiaomi might slow down or freeze, and give you step-by-step instructions for restoring performance. From simple actions like forced reboot to complex firmware manipulations, you'll find a solution for even the most neglected cases. Importantly, some methods require data resets, so take care of backing up important files in advance.

1. Forced reset: first step when getting stuck

If Xiaomi's screen is frozen and doesn't respond to touch, don't panic. In 80 percent of cases, forced restarts, the equivalent of "pulling the battery" on older phones, are helpful, and are safe and don't cause data loss.

For most Xiaomi models (including the Redmi Note, POCO, Mi algorithm such:

1. Press the Power and Volume button up at the same time.
2. Hold them for 10-15 seconds until the screen goes out and the phone starts to reboot.
3. If there is no reaction, try the combination of food. + Loudness down.

On some devices (for example, Xiaomi Mi). A1/A2 With pure Android, only the Power button can work for a long time (20+ If the phone doesn't restart anyway, move to the next section, the problem could be more serious.

⚠️ Note: Do not use sharp objects to press buttons (such as toothpicks or needles) This may damage the mechanism of the button or display. If the buttons are not physically pressed, contact the service center.

Launching games|Camera work.|Use of social media|Updates to the annexes|Another option-->

2. System workload check: what eats up resources?

If Xiaomi’s phone is slowing down but not completely freezing, it’s often a memory shortage or processor overload. To identify the culprit, use built-in monitoring tools:

1. Open Settings → About the phone → System status.
2. Check Memory Use section – if less than 20% is free, the system starts to “brake”.
3. Go to Settings. → Annexes → All applications and sort them by Memory Use.

Typical “eaters” of resources on Xiaomi:

• 🎮 Games (especially Genshin Impact, PUBG Mobile, Call of Duty)
• 📸 Photo/video processing applications (e.g. CapCut, Lightroom)
• 🔄 Background processes (App auto-update, Mi Cloud synchronization)
• 🦠 Malware (if you notice unknown applications with Chinese characters in the title)

If there are suspicious apps on the list, delete them. For games and heavy programs, turn on manual optimization:

1. Open the Settings. → Special facilities → Optimizing memory.
2. Choose Manual Optimization and add problematic apps to the list.

💡

On Xiaomi MIUI 13+ There's a hidden Deep Clean function. To activate it, type the combination in the Calculator app. =.= (Point-Equally-Point-Equally and select Deep Clean.

3.Cache and data cleanup: when the system is "cluttered"

Over time, Xiaomi’s memory accumulates app cache and temporary files that can cause freezes.Cache cleaning does not delete personal data (photos, messages), but frees up space and speeds up the system.

How to clear the cache for all applications:

1. Go to Settings → Memory → Cleanup.
2. Click Clear cache (confirmation may be required).
3. For deep cleaning, choose Deep Cleaning and follow the instructions.

If the problem is in a particular app (such as Instagram or Telegram) you should clear the cache separately:

1. Open the Settings. → Annexes → Select a problem application.
2. Press Memory. → Clear the cache.
3. If it doesn’t work, try to clean up the data (⚠️ This will remove all application settings!).

For advanced users, there is a way to clean the cache of system services through Recovery Mode:

4. Update firmware: fixing software errors

Xiaomi freezes are often associated with firmware bugs, especially if you’re using the beta version. MIUI The manufacturer regularly releases patches that fix critical errors.

How to update firmware:

1. Go to Settings → About the phone → System update.
2. Click Check for updates.
3. If a new version is available, download and install it (Wi-Fi is recommended, as files weigh 1-3 GB).

If your phone freezes during the update, follow the instructions:

• 🔄 Wait 30 to 60 minutes – sometimes the process seems to be “hanging”, but the installation is actually underway.
• 🔋 Make sure the battery is over 50% (when discharged during the upgrade, the phone may “brick»).
• 🛠️ If the update really hangs, force the phone to restart (see section 1) and try again.

⚠️ Note: If after the update Xiaomi stopped turning on or booting into an infinite loop (bootloop), do not try to re-swipe the device through Fastboot without experience.

For users who have automatic updates disabled, we recommend that you enable them:

1. Go to Settings. → The phone. → Updating the system → Settings (⚙️).
2. Activate the option Automatic download via Wi-Fi.
3. Enable Notification of new versions.

💡

Updating your firmware is the most effective way to eliminate freezes caused by software errors. However, before installing the new version, make sure to back up your data through Settings. → Additionally. → Backup and reset.

5. Setting reset: a last resort for system failures

If all previous methods didn’t work and Xiaomi is still hanging, you may need a full reset, which will remove all data from the device, including apps, photos and settings, so be sure to back up in advance.

How to reset the settings through the menu:

1. Open Settings → Additional → Backup and Reset.
2. Select Settings Reset.
3. Confirm the action and wait for the reboot (it will take 5-10 minutes).

If the phone freezes and does not allow you to enter the settings, reset via Recovery Mode:

1. Turn off the phone.

2.Put Power + Volume up until the Mi logo appears.

3. Select Wipe & Reset from the menu → Wipe All Data.

4. Confirm the action and wait for the completion.

5.Reboot the device via Reboot → Reboot to System.-->

Once reset, the phone will look like new.

• 🔑 Sign in to your Mi Account (if you have been linked).
• 📱 Restore data from a backup (if it was created).
• 🔄 Install the applications again (it is better to start with the most necessary ones to identify the possible “culprit” of the brakes).

⚠️ Note: Some Xiaomi models (e.g. Redmi Note 8 Pro, POCO F1) After reset, it may be necessary to re-activate the loader (OEM If your phone asks you to enter your Mi Account password but you don’t remember it, use the official instructions for re-accessing on Xiaomi’s website.

6. Checking of hardware faults

If Xiaomi is stuck even after resetting, the problem may be in the hardware, and here are the most common malfunctions and their signs:

To check some parameters yourself:

1. Processor Temperature: Install the App AIDA64 And check the Sensors section if the temperature is over 70.°C to simple, it's critical.
2. Battery status: Enter the phone code ##4636##, select Battery Information and check the Health Level setting.
3. Memory errors: Run the test using the Mi Flash Tool (requires a PC and unlocked bootloader).

If you suspect iron problems but are not sure of the diagnosis, use the official diagnosis:

• 📱 Go to Settings. → The phone. → Diagnosis (not available on all models).
• 🛠️ Or contact Xiaomi Service Center – Diagnostics are usually free.

7. MIUI Optimization: Hidden Settings for Acceleration

MIUI — Firmware with an abundance of hidden features that can both improve and degrade performance.If your Xiaomi is slowing down, try these settings:

Cancel animation:

1. Activate Developer Mode: Go to Settings → About Phone and click on MIUI Version 7 times.
2. Back to Settings → Additionally. → For developers.
3. Find options: The scale of window animation → Off. Scale of transition animation → Duration of the animator → Off.

Limitation of background processes:

1. In the Developer Menu, find the Process Limit.
2. Select a Maximum 2 process in the background (this will reduce multitasking but increase speed).

For models with MIUI 12+ Easy Mode is available, which simplifies the interface and reduces the load:

1. Go to Settings → Special Opportunities → Easy Mode.
2. Activate the option and restart the phone.

💡

Disabling animation and background processes can increase Xiaomi’s speed by 20 to 30 percent, especially on budget models (Redmi) 9A, POCO C31). However, this will reduce the smoothness of the interface.

8.When to contact the service center?

If you’ve tried all the methods, but Xiaomi is still hanging out, it’s time to turn to the professionals.

• 🔥 The phone is overheated even in simple (more than 50).°C).
• 🔋 Battery swollen or phone shuts down at 30-40% charge.
• 🖥️ Artifacts appear on the screen (stripes, flickers, broken pixels).
• 🛠️ The phone does not turn on or hangs on the Mi logo.
• 💾 Applications do not install or give an error “Insufficient memory”, the place is there.

How to choose a service center:

• 🏢 Xiaomi Official Centers – Guarantee Original Parts, but Can Be Expensive.
• 🔧 Unofficial workshops are cheaper, but the risk of running into fakes (especially batteries).
• 📦 Self-repair – only if you have the experience and tools (e.g., to replace the battery with the Redmi Note 10 Pro).

Before the service visit:

1. Make a backup copy of the data (if the phone is still turned on).
2. Find out the serial number of the device (on the box or in Settings) → The phone).
3. Check if the warranty period has expired (usually 12 months from the date of purchase).

⚠️ Note: If you have installed custom firmware (e.g. LineageOS, Pixel Experience), the official service may refuse warranty repairs».

Critical: On Xiaomi models with MediaTek processors (e.g. Redmi) 9T, POCO M3) self-flashing SP Flash Tool without experience can lead to total loss IMEI In this case, recovery is possible only with the help of specialized equipment (for example, UFi Box).

FAQ: Frequent questions about Xiaomi hangouts