Xiaomi phone freezes during reboot - 7 ways to bring it back to life

Did you click Reboot, and Xiaomi's smartphone hovers on the MI logo, black screen, or endlessly spins download animation? This problem is familiar to many owners of the brand's devices, from budget Redmi to flagship Mi or POCO. The reasons can vary from system failure after the upgrade to hardware malfunctions. The main thing is not to panic and not try to immediately carry the phone to the service center. In 80% of cases, the problem can be solved independently, even if the screen does not respond to touch.

In this article, we will analyze all possible scenarios: from the simplest forced reboot to flashing through Fastboot or EDL. You will learn how to determine whether it is a software failure or hardware, when to try to restore data, and when to run to the wizard. 12T Redmi Note 11, where standard methods may not work.

Warning: If the phone does not respond to the power button, does not vibrate or warm, this may indicate a failure of the motherboard or battery, in which case self-repair is fraught with final "final" breakdown.

1. Forced reset: first step when getting stuck

If Xiaomi is stuck on a logo or black screen but reacts to a charging connection (the indicator lights up), try a hardware reset.This method works on 99% of models, including the POCO F4, Redmi 10 and Mi 11.

For this:

• 🔋 Turn off the charger (if connected).
• 📵 Press the power button. + Increase volume by 15-20 seconds.
• 🔄 When the phone vibrates or the screen goes out, release the buttons.
• ⏳ Wait 1-2 minutes if the logo MI It appears, so the failure is fixed.

If the combination does not work, try an alternative:

• 🔋 Squeeze the power. + Reduce volume by 10-15 seconds.
• 🔄 Release the buttons immediately after the vibration.

⚠️ Note: On some models (such as the Xiaomi 13 Pro), long-term button retention can lead to the launch of the Fastboot. If you see the words “Fastboot mode” – do not panic, just select Reboot using the volume buttons and confirm the power button.

If the phone doesn't respond at all (no vibration, charging indication), the problem may be a discharged battery or damage to the power button plume.

• 🔌 Connect the original charger and leave for 30-60 minutes.
• 🔋 Try to press the power button for 30 to 40 seconds (sometimes helps with a deep discharge).

2. Launch in Safe Mode: Checking the culprit of the failure

If the phone turns on but freezes or reboots cyclically, it could be an app or a virus to blame. To check this, run the device in Safe Mode, which is only system applications.

How to start:

1. Turn off the phone (if it doesn’t respond, use the forced reboot from the previous section).
2. When the MI logo appears, press and hold the Volume Down button.
3. Release when the inscription Safe mode appears in the lower left corner.

In safe mode:

• 📱 Check if the phone is stable. If so, the problem is in third-party software.
• 🗑️ Remove recently installed applications (especially from unknown sources).
• 🔍 Run an antivirus (e.g. Mi Security or Dr.Web).
• 🔄 Restart your phone in normal mode.

⚠️ Warning: If the phone freezes in safe mode, it may indicate that system files are damaged or memory is malfunctioning, in which case only resetting or flashing will help.

If you suspect a virus but can’t remove it, try rolling back updates via Settings. → Annexes → Application management → ⋮ → Reverse updates.This will work if the virus has penetrated through an update of a legitimate application (for example, Google Play Services).

3. Resetting to factory settings: a radical solution

If the phone is turned on but constantly restarts or freezes, and the safe mode did not help, it is time to do Hard Reset. This will remove all data from internal memory, so try to save important information first.

There are two ways to discharge:

Method 1: Recovery Menu

1. Turn off your phone (forced if it doesn’t respond).
2. Press Power + Volume Up until the MI logo appears, then let go.
3. In the Recovery menu, select the language (if there is one).
4. Go to Wipe Data → Wipe All Data (use volume buttons for navigation, power for confirmation).
5. Confirm the reset and wait until it is completed.
6. Choose Reboot.

Method 2: Settings (if the phone is sometimes working)

Go to Settings → About Phone → Resetting → Erase all data.

Once reset, the phone will turn on as new. If there was a software failure, it will help. If not, read on.

⚠️ Note: On some models (Xiaomi) 12S Ultra, Redmi K50) After the reset, you may need to enter a Mi Account linked to the device. If you do not remember the data, use the official unlock service account.xiaomi.com.

4. Fastboot flashing: if the reset didn't help

If the phone freezes after a failed update or reset, but reacts to buttons (you can get into the Fastboot), try reflashing it with the official firmware.This method is suitable for most models, including the POCO X3, Redmi Note 10 Pro and Mi 11 Lite.

You'll need:

• 💻 Windows computer (or Mac/Linux driverless ADB/Fastboot).
• 🔌 Original. USB-cable (preferably from the set).
• 📥 Official firmware for your model (you can download on the official website of Xiaomi).
• 🛠️ Mi Flash Tool (for Windows).

Step-by-step:

1. Download the Fastboot firmware (file with.tgz or.zip extension) for your model.
2. Unpack the archive in a folder without Cyrillic characters (for example, C:\Xiaomi\proshivka).
3. Install ADB/Fastboot drivers.
4. Turn off your phone and press Power + Volume Down to log into the Fastboot.
5. Connect your phone to your PC. The Android Bootloader Interface should appear in the Device Manager.
6. Launch the Mi Flash Tool, select the firmware folder and press Refresh (should appear) COM-port).
7. Select Clean All (complete clean) or Save User Data (data retention, but not always works).
8. Press Flash and wait until it is completed (5-10 minutes).

If it's successful, the phone will reboot, and it can take up to 15 minutes to turn on the first one, which is normal.

For models with a locked bootloader (Xiaomi 13, Redmi Note 12), it may be necessary to unlock Bootloader through the official Xiaomi website.This takes up to 72 hours and requires a tied Mi Account.

fastboot getvar anti

5.EDL mode: A last resort for "bricks"

If the phone doesn't turn on at all, doesn't respond to buttons, and isn't detected in Fastboot, then the last chance is through EDL (Emergency Download Mode), a mode used to recover devices that don't show signs of life.

⚠️ Attention: Firmware through EDL demand:

• 🔧 Authorized Xiaomi Account (for new models).
• 💻 Special cable. EDL or closing contacts on the board (risky!).
• 📥 Firmware in.mbn or.elf format.

Instructions (for experienced users!):

1. Download the EDL firmware for your model (for example, on Xiaomi Firmware Updater).
2. Install the Qualcomm 9008 driver (can be found on the 4PDA or XDA forums).
3. Connect your phone to your PC in mode EDL: Or by using EDL-cable (sold on AliExpress) or close the Test Point contacts on the motherboard (requires disassembly!).

Qualcomm HS-USB QDLoader 9008

Mi Flash Tool

QFil

⚠️ Note: Incorrect Firmware Through EDL If you're not sure what you're doing, go to the service center. For Xiaomi 2022 models, you can kill your phone.+ years, for example, 12S, 13 Lite) may require an official authorized account to unlock EDL.

6. Hardware malfunctions: when to carry in the service

If none of the software methods worked, the problem could be the hardware.

• 🔋 The phone does not respond to charging (no indication, does not warm up).
• 💥 Frozen after falling, getting moisture or overheating.
• 🔊 Artifacts appear on the screen (stripes, flickering).
• 📱 The phone turns on but immediately turns off (cyclical reboot).

In these cases, self-repair is fraught with aggravation of the problem. Contact an authorized service center Xiaomi or a proven master. The average cost of diagnosis is 500-1000 rubles, repairs can cost from 1500 (replacement of the battery) to 10 000 + rubles (replacement of the motherboard).

Frequent hardware causes of hanging:

If the phone is warranty, don't try to repair it yourself. The warranty is removed when the case is opened or unauthorized firmware is unsealed.

7.How to avoid hanging out in the future

To minimize the risk of re-hangs, follow these guidelines:

• 🔄 Regularly update the firmware through Settings → The phone. → Updating the system.
• 🗑️ Do not install applications from unknown sources (enable Settings). → Privacy → Special permits → Installation of unknown applications → Shut down).
• 📴 Avoid full battery discharge (keep the charge at 20–80%).
• 🛡️ Use original or certified chargers.
• 📱 Periodically clean the cache through Settings → Memory. → Cleanup.

If you frequently experiment with firmware or modifications:

• 🔓 Unlock Bootloader officially (via Mi Unlock).
• 📥 Install custom recovery (TWRP Or OrangeFox).
• 💾 Regularly do backups through TWRP Mi Cloud.

💡

If your Xiaomi is stuck after an OTA update, never interrupt the process! wait at least 30 to 40 minutes - sometimes the firmware "thinks" longer than usual.

FAQ: Frequent questions about Xiaomi hangouts