The inscription “Fastboot” on the screen Xiaomi Redmi: reasons and 5 ways to solve

You turned on your Xiaomi Redmi smartphone, and instead of the usual logo, the screen displays the words "Fastboot Mode" with a green Android robot? Don't panic - this is not a breakdown, but a system mode that is used to firmware, unlock the bootloader or restore the device. However, if you did not plan to log in, the problem needs to be solved.

Fastboot mode (or fastbootd) is activated when the software is updated incorrectly, the bootloader malfunctions or the combination of buttons is accidentally pressed. On the Redmi Note 10/11/12, Redmi 9/9A/9C and other Xiaomi lines, the algorithm for getting out of this state may differ. In this article, we will analyze all working methods - from a simple restart to flashing through the Mi Flash Tool.

Why is the phone stuck in Fastboot mode?

There are several reasons for the Fastboot label on Xiaomi Redmi, and most of them are due to software failures.

• 🔄 Interrupted software update – if the smartphone is turned off or discharged during installation OTA-Update, the system can "hang" in fastbootd.
• 🔧 Unlocking the bootloader – using tools like the Mi Unlock Tool without following instructions.
• 📱 Accidental pressing of the combination of buttons - clamping Volume down + Power on-line (relevant to Redmi) 4/5/6 old models).
• 💥 Damage to system files due to viruses, “curved” firmware or failure in recovery.
• 🔋 Critical battery discharge – if the battery is discharged to 0% during critical operations (e.g. resetting settings).

On new models (Redmi Note 12 Pro+, Redmi K50), the Fastboot and EDL (Emergency Download Mode) modes are often confused, and the difference is simple: in Fastboot the screen is illuminated, there is a Mi logo and the inscription, and in EDL the display is completely black, but the PC defines the device as Qualcomm HS-USB QDLoader 9008.

Method 1: Simple reboot (for random activation)

If Fastboot mode came up after a failed button press, try the standard output:

1. Hold the Power button for 10-15 seconds until the screen goes out.
2. Wait 30 seconds and turn on your smartphone in the usual way (short press Power).

On some models (Redmi 7/8/9), a combination of:

Volume up + Nutrition

Hold it for 5-7 seconds until the Xiaomi logo appears.

💡

If your smartphone doesn’t respond to the buttons, plug it into charging for 10-15 minutes, and sometimes low battery power blocks the exit from the Fastboot.

Method 2: Exit through Recovery Mode

If a simple reboot doesn't work, try logging into Recovery Mode, Recovery Mode.

1. Turn off the phone (squeeze the power for 10 seconds).
2. Squeeze the combination: Volume up + Hold on until the Recovery menu appears (Android logo with exclamation mark or blue screen with menu items).
3. Use volume buttons to navigate and select Reboot → System.

On the new models (Redmi Note 11/12), the Recovery menu can be in Chinese.

Method 3: Use ADB and Fastboot (for advanced)

If the phone is detected by the computer in Fastboot mode, you can exit it via the command fastboot reboot.

• 🖥️ PC with installed Xiaomi drivers and tool ADB/Fastboot.
• 🔌 Cable USB Type-C (original, undamaged).
• ⚡ Included debugging by USB (if previously activated).

Step-by-step:

1. Connect your smartphone to your PC.
2. Open the command line (Win + R → cmd) and type: fastboot devices If the device is determined (the serial number appears), type: fastboot reboot
3. If the team doesn’t work, try: fastboot continue.

On models with a locked bootloader (for example, Redmi 10C out of the box), fastboot commands may not be executed - you will need to unlock through the Mi Unlock Tool.

Method 4: Flashing through the Mi Flash Tool (extremely)

If the previous methods didn't work, you just have to reflash the smartphone, and that will delete all the data, but it will make it work again.

Firmware algorithm:

1. Unpack the archive with firmware (.tgz or.zip) in a folder without Cyrillic.
2. Launch the Mi Flash Tool, press Select and specify the path to the firmware folder.
3. Connect the smartphone turned off in Fastboot mode (clip Volume down + Power).
4. In the Mi Flash Tool, press Refresh – the device must be determined.
5. Choose the firmware method: Clean All – complete cleaning (recommended for critical crashes); Clean All and Lock – cleaning + locking the bootloader (for sale); Save User Data – an attempt to save data (not always working).

Flash

⚠️ Note: Firmware of the unofficial (custom) version of the software can lead to a brick (complete inoperability) of the smartphone. ROM Xiaomi.

Method 5: Contacting a Service Center

If none of the methods worked, the problem could be hardware:

• 🔋 Damaged battery (does not hold charge for firmware).
• 🔌 The connector is faulty. USB Type-C (smartphone not defined by PC).
• 💾 Flash memory (eMMC or eMMC) has failed. UFS).

In such cases, a diagnosis is required in an authorized Xiaomi service.

How to choose a service:

• 🔍 Check reviews on 2GIS or Yandex.Maps.
• 📄 Check if the center has the status of Mi Authorized Service Partner.
• 💰 Compare prices – in informal workshops, repairs can be cheaper, but without warranty.

💡

If the smartphone is warranty, do not try to sew it yourself - this will void warranty obligations.

How to avoid getting into Fastboot in the future?

To avoid the problem again, follow the simple rules:

• 🔄 Update the software only through official channels (Settings) → The phone. → Updating the system).
• 🔋 Do not discharge the smartphone to zero – a critically low charge can interrupt system processes.
• 🔧 Do not use informal firmware without experience (risk brick).
• 📱 Lock the buttons when carried in your pocket (accidental pressing of volume) + Nutrition).
• 🛡️ Install antivirus (such as Mi Security) to protect against malware.

On models with an unlocked bootloader (Redmi K-series, POCO F-series), the risk of accidentally logging into the Fastboot is higher. To block the bootloader back, use the command:

fastboot oem lock

⚠️ Attention: Blocking the bootloader will delete all data and return the smartphone to factory settings!

FAQ: Frequent questions about Fastboot mode on Xiaomi Redmi