How to Connect Xiaomi Repeater v1 Wi-Fi: full instructions with photos and tips

Signal amplifier Xiaomi Repeater v1 — This miniature repeater (sometimes called a repeater or booster) can double the range of your wireless network by eliminating dead zones in remote rooms. However, many users face difficulties when connecting for the first time: the device is not detected, flashes yellow or does not connect to the main router at all.

In this article, we will discuss three official ways to customize Xiaomi Repeater v1 — via the Mi Home mobile application, web interface and button WPS. And we'll also tell you how to avoid common mistakes, like when a repeater doesn't see a 5GHz network or constantly resets the connection. All instructions are valid for firmware 2026 and compatible with routers of any brand: TP-Link, ASUS, Keenetic and others.

1.What comes in the kit and how to prepare for the connection

Before you start setting up, check the contents of the Xiaomi Repeater box. v1. The standard set includes:

• 📦 Repiter itself (white or black case with two antennas)
• 🔌 Power adapter 5V/1A (eurofork)
• 📄 Brief instruction in Chinese/English (no Russian version)

For a successful connection, you will also need:

• 📱 Android smartphone (version 5.0)+) or iOS (version 10.0)+) with the Mi Home app
• 🔑 Data from the main Wi-Fi network: name (SSID) password
• 📡 The main router that supports standards 802.11n/ac (2.4 GHz is mandatory, 5 GHz - optionally)

💡

If your router only works in the 5GHz band, Xiaomi repeater v1 The device only supports 2.4 GHz to connect to the signal source (but can distribute a network and 5 GHz to customers).

Place the repeater halfway between the router and the low signal area. Avoid placing near:

• 🚪 Metal doors or thick walls
• 🔌 Microwaves, radiotelephones and other sources of interference
• 🌵 Houseplants (they absorb radio waves)

In the apartment.|Private house.|In the dacha|In the office.|Another place.-->

2. Connect via the Mi Home application (recommended method)

The most reliable method of setting up is using the branded Mi Home app. Follow the step-by-step instructions:

1. Install the app: 📱 Download Mi Home for Android 🍎 Download Mi Home for iOS

When registering, select Russia (or Mainland China if you have a Chinese version of the repeater).

Connect the repeater to the power.

Insert the adapter in the socket next to the router (no more than 1 meter away). Wait for the indicator to flash yellow (connection waiting mode).

Add the device to Mi Home

In the app, click + → Add the device → Network equipment → Xiaomi Wi-Fi Repeater. Follow the on-screen hints.

Select a network to enhance

The app will offer a list of available Wi-Fi networks. Select your main network (2.4 GHz!) and enter your password. If your network is not listed, make sure the router is not hiding it. SSID.

Set up repeater parameters

Set a name for a reinforced network (by default it will be the same as the main network, but with a suffix _EXT). We recommend that you leave automatic channel selection.

Check the Mi Home version (update if necessary)|Make sure the smartphone is connected to the same 2.4GHz network as the repeater.|Turn it off. VPN and firewalls on the phone|Place the repeater in the stable signal area of the main router-->

The setup time usually takes 2-3 minutes. If the process is delayed:

• ⚡ Reboot the repeater (take out/insert the power plug)
• 🔄 Reconnect your phone to Wi-Fi
• 📵 Make sure the distance between the router and the repeater is less than 5 meters during the setup phase.

3. Configure via web interface (alternative method)

If the Mi Home app refuses to work or you prefer manual configuration, use the repeater web interface.

1. Connect to the repeater network: On a smartphone or PC, find a network with a name Xiaomi_Repeater_XXXX (where XXXX — last-minute MAC-Addresses) and connect to it. There is no default password.
2. Open the control panel: In the browser go to the address http://192.168.0.1 or http://miwifi.repeater. The authorization page must open.
3. Enter login/password: By default: login - admin, password - admin (or blank field). If the data does not fit, reset settings.
4. Configure your main network connection: Select Wi-Fi Settings from the menu → Repeater Mode. SSID Your main network (2.4 GHz only!) and password.
5. Save settings: Press Save and wait for the device to restart (the indicator will change color from yellow to blue).

Important: Web interface of the repeater Xiaomi v1 It only works when you connect to its own network. IP 192.168.0.1 will be blocked – use Mi Home for changes.

4. Quick connection via WPS (for compatible routers)

If your router supports the technology WPS (Wi-Fi Protected Setup: Repeater setup takes less than a minute:

1. Activate. WPS on router: Press the button WPS on the back of the router (usually signed or marked with an icon) 🔄). Indicator WPS should start blinking.
2. Launch it. WPS Press and hold the button on the Xiaomi Repeater body v1 for 2 seconds until the indicator flashes yellow quickly.
3. Wait for synchronization: It takes 30 to 60 seconds, and if you connect successfully, you'll confirm the blue indicator on the repeater.

⚠️ Note: Not all routers support WPS If after pressing the button, the repeater indicator continues to flash yellow for more than 2 minutes, use the setting via Mi Home.

Advantages of the method WPS:

• ⚡ Instant settings without entering passwords
• 🔒 Automatic connection encryption
• 📶 Suitable for routers with hidden SSID

Disadvantages:

• 🚫 Does not work with 5 GHz networks
• 🔄 May reset when updating the router firmware

5. Typical errors and their solutions

Even with the right setup, Xiaomi Repeater v1 It can be unstable. We'll look at the most common problems:

🔴 Repiter does not connect to router (blinks yellow)

Causes and solutions:

• 📶 Weak signal from router: move the repeater closer to the source (maximum 3-5 meters during the setup stage).
• 🔒 Incorrect password: Check the character register (password is capitalized sensitive!).
• 🌐 The router only works in 5 GHz: set the mode 2.4 GHz or change the router settings to mixed mode (b/g/n mixed).
• 🔄 Conflict IP-Addresses: turn off DHCP on the repeater (in the web interface) or assign a static IP router-setting.

🟡 Repiter is connected, but the Internet is not working

Check the following points:

• 🌍 Settings DNS: In the repetitor's web interface, specify DNS 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).
• 🔌 Router mode: if the router is in Bridge mode, the repeater will not be able to distribute the Internet.
• 🔄 Double. NAT: turn off DHCP on the repeater, if the router already distributes IP-address.

🔵 Repiter's always shutting down.

Possible causes:

• ⚡ Unstable power: Try another adapter (current at least 1A).
• 📡 Neighboring Network Interference: Manually select channel 1, 6, or 11 in repeater settings.
• 🔥 Overheating: provide ventilation (do not cover the case, do not put in the sun).

💡

If the repeater is unstable after setting up, try turning off the Roaming function in the main router settings, which may conflict with the client reconnect algorithms on the repeater.

6. Optimization of the work of the repeater: expert advice

To Xiaomi Repeater v1 Worked as efficiently as possible, follow these guidelines:

📶 Choosing the optimal location

Use the rule of the "golden mean":

• 🏠 In the apartment: place a repeater on the wall between the router and the “dead zone".
• 🏡 In a private house: if there are several floors, install a repeater on a stairwell.
• 📡 Outdoors: Use a sealed box and a directional antenna (the repetitor is not designed for street use without protection!).

⚙️ Fine tuning through Mi Home

The Mi Home app has hidden options:

• Night Light Mode: Turn off the indicator light in the device settings.
• Speed Limit: Set a limit for connected devices (useful for guest networking).
• Work schedule: set up automatic time-out of the repeater (e.g., at night).

🔄 Firmware update

Check the updates in Mi Home every 2-3 months.

• 🛡️ Fixing security vulnerabilities
• 📈 Improve the stability of the connection
• 🆕 Support for new standards (e.g, WPA3 compatibility)

⚠️ Warning: Do not interrupt the firmware update process! If the repeater indicator flashes red for more than 5 minutes, reset with the Reset button and try again.

7. Resetting settings to factory

If the repeater stopped responding or you forgot your password, reset the entire reset:

1. Press and hold the Reset button: It's located on the back of the device. Hold it for 10-15 seconds until the indicator flashes yellow quickly.
2. Wait for the reboot: Repiter will return to factory settings (network) Xiaomi_Repeater_XXXX passwordless).
3. Reconfigure: Repeat the connection process via Mi Home or the web interface.

Once reset, all user settings (network name, password, schedule) will be lost. If you previously changed the name of the repeater network, it will return to the standard network. Xiaomi_Repeater_XXXX.

FAQ: Frequent questions about Xiaomi Repeater v1