How to go to the settings of the Xiaomi router 4A: way + mistake-making

Owners of Xiaomi Router 4A They often have to change their Wi-Fi settings, update their firmware, or configure their guest network, but how do you get into the device control panel if the instruction is lost and the standard methods don't work? This article covers all the current methods of entering the router settings - from the classic web interface to the mobile application, and also helps to solve typical problems: a forgotten password, an incorrect one. IP-address.

We will not only analyze the basic steps, but also the hidden features of the Mi Router. 4A, For example, how to access advanced settings through Telnet or what to do if the router does not respond to 192.168.31.1. Information updated for firmware 2023-2026 and verified on Xiaomi Router models 4A Gigabit Edition and Xiaomi Router 4A 100M Edition.

⚠️ Important: If you have previously changed IP-The router's manual address, the standard instructions may not work. IP via the command line (section 4).

1. Standard login via web interface

The most common way is to use a browser on a computer or smartphone, which does not require additional programs, only connecting to the router network (by cable or Wi-Fi).

Algorithm of action:

1. Connect the device (PC, laptop, phone) to the network Xiaomi_XXXX (where XXXX — unique suffix of your router).
2. Open any browser (Chrome, Edge, Safari) and type in the address bar 192.168.31.1 or miwifi.com.
3. In the window that appears, enter the username and password. By default, this is the admin and password specified on the sticker at the bottom of the router (usually 8 characters, for example 12345678).

⚠️ Note: If the page does not open, check it out:

• 🔌 Connection to the router (the network indicator on the device should burn).
• 🌐 Correctness of the address entry (without http:// www).
• 🔒 Absence VPN browser-based proxy.

If you see a mistake ERR_CONNECTION_REFUSED, Try out alternative alternatives IP-address:

• 192.168.1.1 – used in some firmware.
• 192.168.0.1 - rare, but occurs after resetting.

2. Sign in via the Mi WiFi mobile application

For Android or iOS smartphone users, it’s easier to use the official app, which provides a simplified interface and additional features, such as remote control.

Instructions for connection:

1. Download Mi WiFi from Google Play or App Store.
2. Connect the phone to the router network.
3. Launch the application and click Add Router → Enter an existing network.
4. Enter the administrator password (by default from the sticker).

⚠️ Note: The application may not find the router if:

• 📱 You have a beta version of the Mi Router firmware installed. 4A (check in the router settings).
• 🔄 The router is running in repeater mode (Repeater).
• 🛡️ Hide the network in Wi-Fi settings enabled.

If the application fails to connect, try:

1. Reset the router (reset button for 10 seconds).
2. Update the Mi WiFi app to the latest version.
3. Remove the app cache in the phone settings.

💡

If the Mi WiFi application does not see the router, try connecting through the browser, and then activate the option to Allow Management via Mi WiFi in the router settings (System section). → Remote control).

3. Password reset if the entrance is blocked

Forgot the password from the admin panel? Don't rush to reset the router to factory settings - check these options first:

Method 1: Recovery through a Xiaomi account

Method 2: Hardware reset (if the account is not tied)

1. Press and hold the Reset button on the back of the router for 10-15 seconds (until the indicators flash).
2. Wait 2-3 minutes for the router to restart.
3. Connect to the network. Xiaomi_XXXX (default password is indicated on the sticker).

⚠️ Attention: Hardware reset removes:

• 📡 All Wi-Fi settings (network name, password).
• 🔐 Administrator and guest network passwords.
• 📥 Parental Control Rules and Device Blacklists.

After resetting the Xiaomi router 4A It will automatically update the firmware to the latest version if it's connected to the Internet. It can take up to 10 minutes -- don't turn off the power!

4. Alternative ways of entering (for experienced users)

If standard methods don't work, try these options. They require basic network knowledge, but they can bypass typical locks.

Method 1: Definition IP-router addresses via the command line

1. On Windows: press Win + R, enter cmd, then execute the command: ipconfig Search for the main gateway line – this is your router’s IP.
2. Nana Mac/Linux: Open the terminal and enter: netstat -rn | grep default

Method 2: Access via Telnet (for firmware only until 2022)

• 🖥️ Connect to the router via cable.
• 🔧 Enable Telnet through a hidden page: http://192.168.31.1/cgi-bin/luci/;stok=/api/xqsystem/login (substitute 192.168.31.1 topical IP).
• 🔑 Use the root login and password from the sticker.

⚠️ Note: Xiaomi has disabled Telnet access for security reasons in new firmware, and trying to turn it on could result in a router locking for 5 minutes.

5. Solving common entry errors

Even after the right actions, the router can keep the settings from being set up, and let's look at the typical errors and their causes:

Error 1: Page 192.168.31.1 does not open

• 🔌 Check the physical connection: indicator LAN The router should be green.
• 🔄 Reboot the router and the device you're connecting from.
• 🛠️ Turn off the firewall or antivirus (they can block access).

Error 2: Incorrect login/password

• 🔑 Make sure you use the password from the sticker on the router, not from Wi-Fi.
• 🔄 If you have changed your password but forgotten, reset (Section 3).
• 📱 Try logging in via the Mi WiFi app – sometimes it saves old data.

Error 3: The router is constantly restarting

• ⚡ Check the power supply – only use the original Xiaomi adapter (5V/2A).
• 🔥 If the router is warming, turn it off for 10 minutes to cool it down.
• 📦 Update the firmware manually (instructions in section 6).

💡

If the Xiaomi router 4A does not respond to reset button Reset, try to hold it for 20-30 seconds – it forcibly resets non-volatile memory (NVRAM).

6. Update the firmware before setting up

Before changing the settings, it is recommended to update the router firmware. This will fix access errors and add new features (for example, support). IPv6 or Mesh networks).

How to update:

1. Go to the web interface (192.168.31.1).
2. Go to Advanced Settings → System system → Firmware update.
3. Click Check Updates and wait for the download.
4. 🔄 After the update, the router will restart automatically (do not turn off the power!).

⚠️ Note: If the update is delayed:

• 🕒 Wait 20 minutes – sometimes the process takes longer.
• 🔌 If the indicators do not flash, reset the Reset button.
• 📥 Download the firmware manually from the official website and download it through the Local Update section.

Tip: After the update, reset the browser cache (Ctrl) + Shift + Del) to avoid interface display errors.

7. Hidden features of Xiaomi Router 4A, which you didn't know

In addition to basic settings, the router hides a few useful options, which can be activated via the web interface or Telnet (if available).

Function 1: Traffic Prioritization (QoS)

• 🎮 Allows you to allocate bandwidth for games or video calls.
• 📊 Adjustment: Advanced settings → QoS → Add a rule.

Function 2: Guest network with speed limit

• 🚪 Create a separate network for guests with a limit of 10 Mbps.
• 🔧 The Way: Wi-Fi → Guest network → Speed limit.

Function 3: Locking devices by MAC-address

• 🚫 Disallow access to specific gadgets (such as children's tablets).
• 📋 Adjustment: Advanced settings → Security → Blacklist.

Function 4: Configurement DDNS remotely

• 🌍 Get a Permanent Domain to Access a Router from Anywhere in the World.
• 🔗 Path: Advanced settings → DDNS (Registration is required on no-ip.com).

💡

Speed up Wi-Fi on Xiaomi Router 4A, Change the channel manually: go to Wi-Fi → Settings → Channel and select 6 or 11 (they are less crowded in urban settings).

FAQ: Frequent questions about Xiaomi Router 4A