What? IP-The address of the router Xiaomi: the full guide 2026

You bought a Xiaomi router (be it Mi Router) 4A, AX3000 flagship AX9000), You connected it to the Internet, but you don't know how to get into the control panel? IP-The address of the device you need to log into the web interface. In this article, we will discuss all possible ways to determine the location of the device. IP-Xiaomi router addresses, including standard values for different models, operating system search methods, and even alternative access options without the need to use the same. IP.

It is important to understand that IP-The router address is not just a set of numbers, but a gateway to the local network through which all traffic passes, and it can be standard (for example, 192.168.31.1 for most Xiaomi models) or manually modified. If you've previously set up a network or used a router from another provider, the address may have gone wrong, and we'll tell you how to find it anyway, from simply viewing the sticker on the case to using the command line.

Standard. IP-Xiaomi router addresses by model

Most Xiaomi routers use one of the three standard routers. IP-And that's based on the model and the firmware version. Here's the current table for the popular devices:

⚠️ Note: If you have previously changed your network settings or used a router in repeater mode, its IP-In this case, the standard values from the table will not work, you will need to determine the address through the operating system (more about this below).

Also note that new Xiaomi models (e.g., the new ones, AX3200 or BE7000) can use the protocol IPv6 parallel IPv4. In this case, you will need to enter the control panel fe80::-address, but this is rare for home networks.

How do you know? IP-router address via a sticker on the case

The easiest way to do this is to look at the information on the sticker that's on the bottom or back of the router, and it says,

• 🔹 Model of device (e.g, R3G for Mi Router 4A)
• 🔹 MAC-Address (required to be linked to the provider)
• 🔹 SSID and the default Wi-Fi password
• 🔹 IP-entrance address (if indicated)
• 🔹 Administrator password (for the first setup)

For example, on the Mi Router sticker AX3000 You'll see a line like this:

: http://192.168.31.1


 http://miwifi.com

If the sticker is erased or missing (for example, on a used device), move on to the following methods.

⚠️ Note: Some models (e.g. Mi Router Mini) IP-The address on the sticker can be specified in format http://miwifi.com. It's not real. IP, It's a domain name that automatically redirects to the local address of the router, and if the Internet is not configured, it won't work.

Definition IP-addresses through the operating system

If the standard address does not fit or you are not sure of its relevance, you can find out IP router through your device's network settings. Let's look at the ways for all the popular OSs.

🖥️ Windows 10/11

In Windows, the easiest way to use the command line is to:

1. Press Win + R, enter cmd and press Enter.
2. Enter the command: ipconfig /all
3. Find the Wireless LAN Adapter (for Wi-Fi) or Ethernet Adapter (for cable).
4. Look at the main gateway line - that's it. IP-router.

Alternative way through Windows settings:

1. Open the settings. → Network and Internet → Wi-Fi (or Ethernet).
2. Click on the name of your network.
3. Scroll down to the Properties block - there will be a Gateway line IPv4.

🍎 macOS

On a Mac, follow the following steps:

1. Open System settings → Network.
2. Choose an active connection (Wi-Fi or Ethernet).
3. Press More. → TCP/IP.
4. IP-The router address will be listed in the router line.

Or through the Terminal:

netstat -nr | grep default

📱 Android

On Xiaomi, Redmi or other Android devices:

1. Open the Settings. → Wi-Fi.
2. Click on the name of your network.
3. Scroll down to the Additional or Advanced Settings block.
4. Find the Gateway or Router line.

If this item is not available, use the WiFi Analyzer or Fing app. IP-gateway address in network information.

🍏 iPhone (iOS)

On the iPhone or iPad:

1. Open the Settings. → Wi-Fi.
2. Click on the i symbol next to your network name.
3. Scroll down to the router block - that's it. IP-router.

⚠️ Note: If the type address is displayed in the iOS settings 169.254.x.x, This means that the device did not receive the correct network settings from the router.

How to enter the control panel of the Xiaomi router

When did you determine IP-So, the address, you can go to the setting:

1. Open any browser (Chrome, Edge, Safari).
2. Enter the address bar IP-address (e.g, http://192.168.31.1).
3. If a security warning appears (due to a self-signed certificate), click More → Go to the website.
4. Enter the administrator password (specified on the router sticker).

On new Xiaomi models, for example, AX6000) Instead of a standard web interface, you can open the Mi WiFi application:

• 🔹 Download the official Mi WiFi app from the App Store or Google Play.
• 🔹 Connect to the router network.
• 🔹 Open the app and it will automatically find the device.

If the Xiaomi router does not open the control panel IP-At the address, try an alternative domain http://miwifi.com or http://d.miwifi.com. These addresses work even when you change. IP, If the router is connected to the Internet.

How to change IP-router address

Sometimes standard. IP-The address conflicts with other devices on the network or is simply inconvenient, in which case it can be changed:

1. Go to the router control panel (as described above).
2. Go to the section Additional settings → Network → LAN.
3. Find the field. IP-address (may be named) LAN IP).
4. Enter a new address (e.g. 192.168.10.1).
5. Save the settings and restart the router.

⚠️ Attention: After the change IP-You'll have to connect to the router at a new address, and all the devices on the network will also receive new ones. IP from a new range (for example, if you changed 192.168.31.1 to 192.168.10.1, then the devices will receive the address form). 192.168.10.x).

Recommended ranges for home networks:

• 🔹 192.168.0.x (mask 255.255.255.0)
• 🔹 192.168.1.x
• 🔹 192.168.10.x
• 🔹 10.0.0.x (large-network)

Avoid addresses like 192.168.1.1 if you already have another device with one. IP (for example, the second router or IP-camera).

💡

If, after the change, IP-Router stopped giving out the Internet, check the settings DHCP section LAN. Make sure the option to turn on DHCP-The server is active and the range of addresses does not overlap with the IP router (for example, if the router has an address) 192.168.10.1, pool DHCP must have 192.168.10.100-192.168.10.200).

Frequent problems and their solutions

Sometimes users have difficulty in trying to identify or use IP-Xiaomi router address. Let's look at typical scenarios and how to solve them.

🔴 The router doesn't open on IP-address

Possible causes and solutions:

• 🔹 Wrong. IP-Address – check it again via ipconfig or sticker.
• 🔹 The router is not connected to power – make sure the indicators are on.
• 🔹 Browser caches old page – try Ctrl + F5 other browser.
• 🔹 Firewall Block – Temporarily Disable Antivirus.
• 🔹 Router in recovery mode – if the orange indicator flashes, flashing is required.

🔴 IP-The address conflicts with another device

If two devices on the network have the same IP, There will be conflict:

• 🔹 Change. IP-router address (as described above).
• 🔹 Disable the second device with conflicting IP.
• 🔹 Use static. IP-Addresses for critical devices (in settings) DHCP).

🔴 After resetting the settings IP-address

If you have done a hard reset (press the Reset button for 10 seconds) IP-The address may have remained the same:

• 🔹 Reset is incorrect – repeat the procedure.
• 🔹 The router saves settings in non-volatile memory – try to turn off power for 30 seconds.
• 🔹 Firmware is damaged – you need to flash it through the MiWiFi Repair Tool.

Alternative ways to manage the Xiaomi router

If you determine IP-Address fails or web interface is unavailable, alternative methods can be used:

📱 Mi WiFi appendix

The official application from Xiaomi allows you to manage the router without knowing it IP-That's enough:

1. Download Mi WiFi from the App Store or Google Play.
2. Connect to the router network.
3. Open the app, it will automatically find the device.

The annex supports:

• 🔹 Wi-Fi settings (network name, password).
• 🔹 Managing connected devices.
• 🔹 Firmware update.
• 🔹 Set up parental control.

🖥️ MiWiFi Repair Tool (for Windows)

If the router does not respond, you can use the official utility for recovery:

1. Download the MiWiFi Repair Tool from Xiaomi.
2. Connect the router to the computer via cable.
3. Launch the utility and follow the instructions.

The utility will help:

• 🔹 Firmware repair.
• 🔹 Reset the settings.
• 🔹 Find out the current one. IP-address.

🔧 Telnet/SSH (power-user)

Advanced users can connect to the router via Telnet or SSH (if the function is on:

1. Find out. IP-router address (any of the described methods).
2. Use the command: telnet 192.168.31.1 or SSH: ssh admin@192.168.31.1
3. Enter the administrator password.

⚠️ Attention: By default Telnet/SSH disabled on most Xiaomi routers. their activation requires preconfiguration through the web interface or firmware custom software (for example, OpenWRT).

💡

If you can't determine IP-Xiaomi router address, the most reliable way is to reset it to factory settings, then return to the standard address (192.168.31.1), and access to the control panel will be restored.

FAQ: Frequent questions about IP-Xiaomi router addresses