When you first set up your home Internet or move to a new apartment, users often have to change the parameters of your wireless network. A key step in this process is to log into the device’s web interface, where all the basic functions are controlled. However, to get inside the system, you need to know the exact address where your router lives on the local network. For Xiaomi equipment and the Redmi sub-brand, this parameter can vary depending on the model and firmware version.
The standard solution for most modern network devices is to use reserved domain names instead of digital values. In the Chinese manufacturer’s ecosystem, the main address is miwifi.com, which automatically redirects the browser to the desired one. IP. However, if the domain name doesn’t work or the network configuration has been changed manually, you will need accurate digital data. IP-The address remains the most reliable way to access the administrative panel, especially when DNS-The servers are not working properly.
In this article, we will detail which addresses are used by default, how to find them through the operating system and what to do if standard login methods do not work. Understanding these nuances will help you quickly configure Wi-Fi security, change your password or update your router software without contacting technical support.
Standard default addresses for different models
Xiaomi has a certain standardization in its network products, which makes life easier for users. For the vast majority of routers, including the popular Mi Router 3, 4, 4A, 4C, AX3600 and newer models with Wi-Fi 6 support, the main address is 192.168.31.1. This distinguishes them from many other manufacturers who more often use 192.168.0.1 or 192.168.1.1.
However, there are exceptions and specific configurations: some older models or devices released for certain regional markets may have different settings than the standard. IP-The address can be dynamically assigned by the main router. The table below shows the most common addresses for current models.
| Model router | IP-default | Domain name | Note |
|---|---|---|---|
| Mi Router 4 / 4A / 4C | 192.168.31.1 | miwifi.com | Standard for most models |
| Mi Router AX3600 / AX1800 | 192.168.31.1 | miwifi.com | Support for Wi-Fi 6 |
| Redmi Router AC2100 | 192.168.31.1 | miwifi.com | Game series |
| Older models (R1D, R1C) | 192.168.31.1 | miwifi.com | May require updates |
| Repeat mode | Dynamic | No. | Depends on the main router. |
It is important to note that 192.168.31.1 is a unique identifier for Xiaomi’s local network, which reduces the likelihood of conflicts if you already have another appliance in your home with 192.168.1.1. If you just bought a device and unpacked it, the probability that it will respond to this request is more than 95%.
How to find out IP-router address via Windows and macOS
If standard addresses don’t work or you’re not sure if your settings haven’t changed before, the most reliable way to find out the current address is to get a new one. IP-The gateway address is the request for information from the operating system itself. A computer or laptop connected to the router already knows where to send data, and stores this information in network settings. This method is universal and suitable for any version of Windows or macOS.
For Windows users, the fastest way is to use the command line. You need to press the Win + R key combination, type in the cmd command and press Enter. In the black window that opens, you need to enter the ipconfig command and press Enter again. Among the many lines, you need to find the partition corresponding to your connection (for example, "Wireless Network" or "Ethernet"), and see the value of the main gateway string. This set of numbers is the address you want.
Owners of macOS or MacBook laptops will also have no difficulty finding this information, go to System Settings, select the Network section, then click on an active connection (Wi-Fi or Ethernet) and click the Additional button. In the window that opens, you need to go to the tab TCP/IP, where the router will be specified in the field IP-address.
☑️ Checking the connection before entering
There's another visual way that doesn't require commands. In Windows, you can right-click on the network icon in the tray (near the clock), select Network and Internet settings, then go to Adapter Settings. Double-click on Active Connection will open the status window where you need to press the Detail button. In the list of parameters, find the IPv4 default gateway.
Entering through the Mi Wi-Fi mobile application
Modern users are increasingly choosing to manage the network from a smartphone, and Xiaomi for this convenient application Mi Wi-Fi (or Xiaomi Home).This method is especially relevant, as it allows you not only to enter the settings, but also to conduct the initial configuration of the router without using a computer.
To get started, you need to download the official app from Google Play or the App Store. Once you install and register your account, the app will ask for permission to access the geolocation and local network — these are mandatory requirements for detecting the router. If the router is already configured and connected to the phone, it will appear in the list of devices. Clicking on the router icon will open the control panel where you can change the password, see the list of connected customers and update the firmware.
⚠️ Attention: To control the router through the application, your smartphone must be connected to the Wi-Fi network of this router (3G/4G) It is possible only after pre-binding the device and configuring remote access, which requires additional actions.
Within the application, technical information is often hidden that is not immediately visible. Once you go to the router settings through the application, you can find the Status section or Network Information, where you will specify the current status. IP-address WAN and LAN. This is useful if you plan to skip ports or set up static IP game console.
💡
If the application does not see the router, try temporarily turning off mobile Internet on the phone, leaving only Wi-Fi. This will help the application correctly identify the local device.
Access problems and their solution
Even if you know the correct address, you sometimes have a situation where the settings page is not loading. The browser can give an error "Can't access the site" or endlessly rotate the load indicator. Most often the problem is that the computer and the router are in different subnets. For example, if your PC has the address 192.168.1.5 and the router is waiting to connect to 192.168.31.1, direct access through the browser can be blocked by OS security settings or no route.
In this case, you must manually prescribe IP-Network card address. Windows does this through the Control Panel. → Network control centre → Change the adapter settings. Right-click on the connection, select Properties, then IP version 4 (TCP/IPv4) → Properties. Here you need to select the "Use the following" option. IP-address and to specify a static address, for example, 192.168.31.100, mask 255.255.255.0 gateway 192.168.31.1.
Another common reason is browser cache or use of a secure protocol. Try opening incognito mode or using another browser. It's also worth checking if you have a VPN or proxy enabled - they can forward local requests to an external network, making it impossible to log in to the router. Be sure to turn off the VPN before entering local settings.
⚠️ Note: Do not try to enter an address in the search bar of a search engine (for example, Google or Yandex). IP-The address or domain name of the router should be entered exclusively in the address bar of the browser, where it is usually displayed. URL website.
What if a page requires a password you don’t remember?
Static IP and DHCP Server Configurement
Once you successfully log in to 192.168.31.1, you will have a control panel open in front of you. One of the important features available here is the setup. DHCP-It gives out addresses to all your devices (phones, laptops, TVs) and the default address pool starts at 192.168.31.2 and ends at 192.168.31.254.
If you are planning to set up a home server or you need a permanent address for video surveillance, it makes sense to reserve a home server. IP-In the menu of Xiaomi routers, this feature is often called static distribution or Address Reservation. You choose a device from a list of connected customers. MAC-address) and assign it a fixed IP, which will not change after the router restarts.
You can also change the router address in this section. If for some reason the standard 192.168.31.1 does not suit you or conflicts with the provider's equipment, you can change it to any other one within the subnet, for example, 192.168.31.254. After applying the settings, the router will restart, and you will have to use a new address to log in.
💡
Change of change IP-The router's address requires all devices to be reconnected, because the old gateway will no longer respond.