How to go to the settings of the Xiaomi router in repeater mode: full instructions with problem solving

Repeater mode (repeater Wi-Fi) on Xiaomi routers is a convenient feature for expanding the coverage area of the network, but it often causes confusion among users. IP-192.168.31.1 stops working and the web interface becomes unavailable through the usual methods. IP, Connecting to the cable and avoiding common errors.

Features of Xiaomi (models Mi Router) 3/4/4A/4C/AX1800/AX3600 etc.) in repeater mode - the device receives dynamic IP It's from the main router, so it can change its address. IP, What to use for authorization and what to do if the settings page does not open, and consider the hidden nuances that are not written in the official instructions, but save hours of time.

Why the standard method does not work in repeater mode

In normal router mode, Xiaomi is always available at 192.168.31.1 or via the domain miwifi.com.

• 🔌 The device is shutting down its own. DHCP-service and receive IP from the main router automatically.
• 🔒 Default login and password (admin/Password from the sticker may not fit.
• 🌐 The domain miwifi.com is no longer allowed on the local network.

This is not a failure, but normal behavior: the repeater becomes a “transparent” bridge, and its settings are hidden behind the background. IP The main router, to access, you first need to determine the current router. IP repeater.

Method 1: Definition IP repeater via main router

The most reliable method is to find IP The repeater in the list of connected devices of the main router:

1. Connect to the main Wi-Fi network (not the repeater network!).
2. Open the main router's web interface (usually 192.168.0.1 or 192.168.1.1).
3. Go to the Connected Devices section (or DHCP Clients, Local Network).
4. Find a device called Xiaomi or miwifi.com in the list – this will be the case. IP your repeater.

Typical. IP-Repetitor addresses on the main router network:

If Xiaomi is not listed, try connecting to a repeater network and using alternative methods (see next section).

💡

If the main router is offline DHCP, Xiaomi may not be able to get a copy IP. Turn it on. DHCP or assign a static IP manually.

Method 2: Connecting to a cable (if Wi-Fi is not working)

If you determine IP The repeater failed via the main router, use a direct connection via Ethernet:

1. Connect the computer to LAN-repetitorial.
2. On the computer, manually ask IP-subnet 192.168.31.x (for example, 192.168.31.2) with a mask of 255.255.255.0.
3. Try to open in your browser: 192.168.31.1 (standard address) miwifi.com (if you have a browser). DNS works) 192.168.31.254 (alternative address)

If the page does not open, check:

• 🔌 Cable connected to LAN-port of the repeater (not WAN!).
• 🖥️ Computer's offline. VPN proxy.
• 🔄 Reboot the repeater (reset button for 5 seconds).

Static set up IP PC-only|Cable in LAN-repetitive-port|Disabled. VPN/proxy|Reboot repeater-->

Method 3: Using the Mi Wi-Fi mobile application

The official Mi Wi-Fi app (available for Android and iOS) often copes where the web interface is not available.

1. Connect your smartphone to the repeater network (not the main router!).
2. Open the Mi Wi-Fi app and wait for the device to be automatically detected.
3. If the device is not found, click Add manually. → Repeat mode.
4. Enter the password from the repeater network (by default - from the sticker on the device).

Important: The application may not see the repeater if:

• 📱 You have an old version of Mi Wi-Fi (update in App) Store/Google Play).
• 🔒 The administrator password has been changed on the repeater.
• 🌍 The smartphone is connected to another network (for example, mobile data).

If the app gives an error "I couldn't connect", try:

1. Restart the app and repeater.
2. Remove the application cache (Settings) → Annexes → Mi Wi-Fi → Memory. → Clear the cache).
3. Use a different smartphone (on Android 10)+ iOS 14+).

Data for authorization: login and password

In repeater mode, Xiaomi can request different credentials depending on the firmware:

If you forgot your password:

• 🔑 On stock firmware, reset the settings with the Reset button (clamb for 5-10 seconds).
• 🔧 On custom firmware (Padavan, OpenWRT) restore access through SSH Telnet.

A critical nuance for the repeater: after resetting the settings, the device will automatically return to the router mode, and it will have to be reconfigured as a repeater.

💡

If you change your administrator password and forget it, resetting to factory settings is the only way to get access back, but it will turn off repeater mode!

Solving Typical Errors When Entering Settings

Even after the correct definition IP Users are faced with errors. Let's look at the most common ones:

1. Page won't open (ERR_CONNECTION_REFUSED)

Causes and solutions:

• 🔌 Repiter not connected to the network: check power and indicators (should be on blue/orange LED).
• 🔒 Firewall Blocking: Turn Off Antivirus or Add IP repeater-exclusive.
• 🌐 Wrong. IP: Use ipconfig (Windows) or ifconfig (Linux/macOS) connect.

2. Authentication error ("Incorrect login / password")

What to do:

• 📝 Check the keyboard layout (password is case sensitive!).
• 🔄 Reboot the repeater and try again in 2 minutes.
• 🔧 If your password has changed, reset your settings (see previous section).

3.Infinite page loading

Possible causes:

• 🖥️ Outdated browser: use Chrome, Firefox or Edge of the latest version.
• 📡 Weak Wi-Fi signal: connect via cable or approach the repeater.
• 🔄 Repetitor overload: disconnect all devices from its network and try again.

💡

If the settings page opens but “hangs” while saving the changes, try using another browser in incognito mode – this often solves the cache problem.

Additional Repetitor settings after entry

After successfully logging into the web interface, check the key parameters:

• 📶 Signal power: in the Wi-Fi section → Select the optimal channel (e.g. 6 or 11 for 2.4 GHz).
• 🔄 Auto-channel switching: Turn off this option if you notice a communication break.
• 🔒 Guest Network: Set up a separate network for guests in Wi-Fi → Guest network.
• 📊 Traffic statistics: Include monitoring in Tools → Statistics.

For stable operation of the repeater, we recommend:

1. Update the firmware to the latest version (System) → Update of the PO).
2. Shut down. IPv6, If the main router does not support it.
3. Set up static IP for the repeater in the settings of the main router (so that the address does not change).

Warning: If you change SSID or a repeater network password, all connected devices will be disabled and require re-entry of data.

FAQ: Frequent questions about setting up a Xiaomi repeater

If none of the methods helped to go into the settings, check:

• 🔌 Correctness of cable connection (LAN/WAN).
• 📡 Compatibility with Wi-Fi standards (e.g. repeater) AX3600 It will not work with an outdated router. 802.11g).
• 🔧 The presence of alternative firmware (for example, Padavan changes the IP 192.168.123.1).

In extreme cases, contact Xiaomi with the reference model of the repeater and the firmware version (you can find it on the sticker or in the web interface).