How to go to the settings of the Xiaomi modem: all ways and solutions to problems

Xiaomi modems and routers (Mi Router, Redmi Router, AIoT Router) offer great opportunities for fine-tuning the network, but many users face difficulties already at the stage of logging into the control panel. Without access to the web interface, you can not change the Wi-Fi name, change the password, configure the guest network or update the firmware. In this article, we will analyze all the current ways to log in to settings, including standard and alternative methods, and also solve typical authorization problems.

Xiaomi modems feature the Mi Wi-Fi (formerly Mi Router) app for management, but the web interface remains a more versatile solution. We will look at both options, and explain why sometimes the standard 192.168.1.1 does not work and what to do in such cases. If you just bought a device or encountered a login error, this guide will help you to figure out without contacting for support.

1. Standard method of entry through IP-address

The most common method is the use of IP-The default modems on most Xiaomi modems are 192.168.31.1 (for newer models) or 192.168.1.1 (for older versions.

To go into the settings:

• 🌐 Open any browser (Chrome, Edge, Firefox) on a device connected to the modem network (via Wi-Fi or cable).
• 🔍 Enter 192.168.31.1 or miwifi.com (alternative domain for Xiaomi devices).
• 🔑 On the authorization page, enter your login and password. By default, this is the admin and password on the back of the device (or admin, if you haven't changed it).

Critical detail: If you have previously changed your password in the Mi Wi-Fi app, it may not match the password for the web interface, in which case you will need to reset.

Alternatives IP-Addresses and domains for Xiaomi

If the standard address doesn't open, try alternatives. Xiaomi modems can use different IPs depending on the mode of operation (router/bridge) or firmware version. Here is a full list of possible addresses:

If none of the addresses are opened, check:

• 🔌 Connect to a modem (Wi-Fi or Ethernet cable must be connected directly).
• 📱 Absence VPN or proxy in the device settings.
• 🔄 Reboot the modem (press the power button for 10 seconds).

💡

If you are connected to the modem via a repeater, the web interface may not be available. Connect directly to the router's main network.

3. Sign in via Mi Wi-Fi app (formerly Mi Router)

The Mi Wi-Fi app (available for Android and iOS) offers a simplified interface for modem management, which is convenient for basic settings, but has limitations compared to the web version, for example, the application cannot change the DNS or configure the VLAN.

Instructions for entry:

1. Download the Mi Wi-Fi app from Google Play or the App Store.
2. Connect to the Xiaomi modem network.
3. Open the app and select your device from the list (if it doesn’t show, click “Add Device”).
4. Enter the administrator password (as the default is indicated on the device sticker).

The advantage of this method is that it automatically determines the model and version of the firmware, and it is also a user-friendly interface for beginners, but advanced settings (such as IPTV or Port Forwarding settings) will still require a web interface.

4. Solving Authorization Problems

One of the most common problems is the wrong login or password, and if you forget the login details, there are several ways to restore:

• 🔍 Look at the password on the sticker at the back or bottom of the modem (usually listed next to the SSID and MAC-address).
• 🔄 Try the standard combinations: Login: admin, password: admin Login: root, password: empty
• 📱 If you have previously used the Mi Wi-Fi app, try resetting your password through it (Device Management section" → "Password reset").

If nothing works, you'll need a hardware reset.

1. Find the Reset button on the back of the modem (usually recessed in the case).
2. Take a paperclip or toothpick and press the button for 10-15 seconds.
3. Wait for the reboot (the indicators should blink and light up in standard mode).

⚠️ Warning: Resetting will bring back all settings to factory, including the Wi-Fi name and password, and after the procedure, you'll have to reset the modem.

5. Sign in to settings via Telnet/SSH (for advanced users)

If the web interface and application are not available and reset does not help, you can try connecting to the modem via Telnet or SSH. This method is suitable for advanced users and requires knowledge of the command line.

Instructions for Windows:

1. Open the Command Prompt (Win + R → enter cmd).
2. Enter the command to connect: telnet 192.168.31.1 If the ports are changed, specify them explicitly: telnet 192.168.31.1 23
3. Enter the login and password (by default root and password from the sticker).

For Linux/macOS, use the terminal and command:

ssh admin@192.168.31.1

Telnet/SSH can be used to:

• 🔧 View the system logs (logread).
• 📦 Install packets (if you have access to opkg).
• 🔄 Manually restart the modem (reboot).

⚠️ Warning: Incorrect commands in Telnet/SSH It's not a good idea to use this method without experience with Linux.

6. Features of entry for different Xiaomi models

Some Xiaomi modems have unique nuances of entry to settings. Consider the most popular:

Mi Router 4A Gigabit Edition:

• 🔌 It uses 192.168.31.1 by default, but may conflict with some providers (e.g., Rostelecom).
• 🔒 Password by default - the last 8 characters MAC-address (indicated on the sticker).

Redmi Router AX6:

• 🌐 Supports login via router.xiaomi.com even without an internet connection.
• 🔄 After the firmware update may require re-authorization in the Mi Wi-Fi application.

AIoT Router AC2350:

• 📡 Has a separate interface for configuring IoT devices (available on the Internet) 192.168.31.1/iot).
• 🔐 Requires a link to a Xiaomi account when you first connect.

If your model is not specified, check the documentation on the official Xiaomi website or use the universal methods from the previous sections.

💡

For models with support for Mesh networks (for example, Redmi Router AX6000), you can only enter the settings through the main node.

7. Frequent errors and their solutions

Even after the right input IP-Users are facing errors. Let's look at the most common ones:

If none of the methods worked, check:

• 🔌 Is the modem powered by the network (indicators should burn).
• 📡 Is the computer not on the "Airplane" mode".
• 🛡️ Does not block access antivirus or firewall.

FAQ: Answers to popular questions