Logging into the control panel of the Xiaomi router is the first step to set up Wi-Fi, change password or optimize the network. IP-The address doesn't open, the factory login doesn't work, the router doesn't respond to the connection at all. In this article, we'll look at all the current ways to log in to the settings for Mi Router models. 4A, AX3000, AX6000 and other problems, and solve typical problems.
It is important to understand that the process may vary depending on the firmware and year of release of the device, for example, new Xiaomi routers with MiWiFi firmware. ROM The old models (until 2020) often use a classic login/password.We will look at both options, as well as alternative methods of access via mobile application and Telnet for advanced users.
1.Preparation for the entrance: what to check before the beginning
Before you try to go into settings, make sure that the basic conditions are met, most often access problems arise from improper connection or incorrect network settings on the computer.
Mandatory conditions for entry:
- 🔌 Xiaomi router should be connected to the network and fully loaded (power indicator burns smoothly, without blinking).
- 💻 The device (PC, laptop, smartphone) is connected to the router via cable (recommended) or Wi-Fi.
- 🌐 The device is offline. VPN, proxy and additional network filters (e.g. AdGuard or Avast SecureLine).
- 🔄 The browser has cleared the cache or uses incognito mode (especially if there were previously attempts to log in).
If you're connected to Wi-Fi, make sure you're on the same network as the router, for example, if your Mi Router is giving away a network with a name. Xiaomi_1234, And you're connected to the neighbor's. TP-Link_Guest — You can't log in to the settings, and you also have to temporarily disable the Windows firewall or the antivirus, which sometimes block access to local devices. IP-address.
💡
If the router is new and not yet configured, connect to its Wi-Fi network with the default name (usually a new router). Xiaomi_XXXX or MiWiFi_XXXX). The password is on the sticker at the bottom of the device.
2. Standard method: entrance through IP-address 192.168.31.1
The primary address for accessing the settings of most Xiaomi routers is 192.168.31.1. IP It's written in the default firmware, and it should open in any browser:
Step-by-step:
- Open your browser (Chrome, Edge, Firefox – it doesn’t matter).
- In the address bar, type http://192.168.31.1 and press Enter.
- If an unsafe connection warning appears, ignore it (click More). → Go to the website).
- Enter your login and password (see table below).
| Model router | Login by default | Password default | Notes |
|---|---|---|---|
| Mi Router 4A, 4C, 3G/3 | admin | admin or empty field | New firmware requires binding to Mi Account |
| AX3000, AX6000, AX9000 | — | — | Authorization only through Mi Account (login / password from Xiaomi) |
| Mi Router Pro, HD | admin | Password from the sticker (8 characters) | You may need to reset at the first entrance. |
| Any model after reset | admin | admin or empty | If not, reset the settings with the Reset button. |
If the page does not open, check:
- 🔗 Correctness of the input IP (Sometimes users confuse 192.168.31.1 with 192.168.0.1 or 192.168.1.1).
- 🖧 Network card settings on PC: IP It should be automatically (DHCP). You can check it in the control panel. → Network connections → Properties → IPv4.
- 🔄 Try another browser or device (such as a smartphone).
3. Alternatives IP-address and domain entry
If 192.168.31.1 does not work, the Xiaomi router may use a different address.
- 📦 Devices with custom firmware (for example, Padavan or OpenWRT).
- 🔄 Routers after resetting settings or software updates.
- 🏠 Networks with multiple routers (e.g., if Xiaomi is connected to another router).
List of possible addresses:
- http://192.168.0.1 — alternative IP for some.
- http://miwifi.com — domain name, redirects to local IP.
- http://192.168.1.1 — Used in rare cases (for example, after manual subnet change).
- http://router.asus.com — Sometimes it works on firmware based on Asuswrt-Merlin.
To know exactly. IP your router:
- On Windows: Open the Command Prompt (Win) + R → cmd) and type: ipconfig Search for the main gateway line - that's what it is. IP router.
- Nana MacOS/Linux: In the terminal, perform: netstat -rn | grep default
- On Android: Use the WiFi Analyzer app or check in the Wi-Fi settings (Router section).
How do you know? IP router via the Xiaomi mobile application?
4. Authorization through Mi Account: what to do if you require a login from Xiaomi
New models of Xiaomi routers (for example, AX3000 or AX6000) They require authorization through a Mi Account, which is for security, but often causes confusion. 192.168.31.1 You see the form of the entrance with the fields for email/Phone – Follow these instructions:
Step-by-step algorithm:
- Enter an email or phone linked to your Xiaomi account (the same as for your smartphone) Redmi/POCO).
- Enter your password. If you forgot, restore it at account.xiaomi.com.
- If the error “Device is not tied” appears, open the Mi WiFi mobile application and link the router to your account manually.
- After successful login, you will be redirected to the web interface settings.
Important: If the router was purchased by a used router, the previous owner could not untie it from his account, in which case you will need a full reset (press the Reset button for 10 seconds).
Make sure the router is connected to the internet|Check that the date and time on the device are correct|Shut down. VPN/proxy|Use the account to which the router is linked-->
5. Sign in via the Mi WiFi mobile application
If the web interface is not available, you can control the router through the official Mi WiFi app (formerly Mi Router), which is especially convenient for users of Xiaomi, Redmi or smartphones. POCO, The app is automatically synced to your Mi Account.
How to connect:
- Download the Mi WiFi app from Google Play or the App Store (for iOS).
- Sign in with the same Xiaomi account as you do on your router.
- In the main menu, select your router (if not, click Add Device and follow the instructions).
- Go to Settings – all the basic functions (Wi-Fi, guest access, parental control) are available here.
Advantages of this method:
- ✅ Don't remember. IP-address.
- ✅ Convenient interface with tips.
- ✅ Remote management capability (if Remote access is enabled).
However, there are limitations:
- ❌ Not all advanced settings are available (e.g. Port Forwarding or VLAN).
- ❌ Requires a stable Internet connection for synchronization.
💡
Mi WiFi mobile app is the easiest way to manage a router for beginners, but for fine-tuning (e.g. changing the router). DNS ortune IPTV) Better to use the web interface.
6.Tackling access problems: what to do if nothing works
If none of these things worked, there could be more to the cause, from firmware failure to hardware failure, and let's look at typical scenarios and their solutions.
Table of errors and decisions:
| Problem. | Possible cause | Decision |
|---|---|---|
| Page 192.168.31.1 does not open | Wrong. IP-router | Find out what's relevant. IP via ipconfig (see section 3) |
| Error "Incorrect login / password" | Router tied to another Mi Account | Reset the settings with the Reset button (10 seconds) |
| Website asks to update firmware before entering | Outdated version of the software | Connect the router to the Internet and wait for automatic update |
| After entering the password, a white page appears. | Web interface failure | Clear the browser cache or try another (like Firefox) |
| Router does not respond to ping (Request expires) | Hardware failure or firewall lock | Check power, cables, turn off firewall on PC |
Extreme measures:
- 🔄 Resetting: Press the Reset button on the back of the router on 10–15 After that, the router will return to the factory settings, and you can log in with a login / password. admin/admin.
- 🔧 Manual firmware update: if the router is turned on, but the web interface does not work, download the firmware from the official Xiaomi website and download it through the recovery mode (instruction for advanced users).
- 🛠️ Hardware check: If the router is not turned on or constantly restarts, there may be a malfunction of the power supply or memory chips.
💡
If the router still does not allow you to access the settings after reset, try connecting to it from another device (for example, from a smartphone via a mobile browser), sometimes the problem lies in the network settings of a particular PC.
7. Advanced methods: Telnet and SSH power-user
If the web interface is not available, but the router works, you can try connecting to it via Telnet or SSH. It's relevant to:
- 🔧 Recovery after a failed firmware update.
- 🛠️ Diagnostics of hardware problems.
- 🔒 Unlock additional features (e.g., enable OpenVPN).
Instructions for connecting via Telnet:
- Make sure that the PC has a Telnet client installed (on Windows, include it in the Control Panel). → Programmes and components → Including Windows components).
- Open the Command Prompt and enter: telnet 192.168.31.1
- Enter the username and password (by default - root and admin, but may differ).
- To reset the password of the web interface, execute the command: nvram set http_passwd="" nvram commit reboot
⚠️ Warning: Incorrect commands on Telnet can cause the router to break down. If you are not sure about your actions, you should consult a specialist or use official recovery methods.
For models with firmware Padavan or OpenWRT instead of Telnet is often used SSH. The connection is similar, but requires a PuTTY program or built-in terminal on the Linux/MacOS.