How to go to the settings of the Xiaomi modem: all the ways for Mi Router, AX3600, AX6000 and other models

Log in to the web interface of the Xiaomi modem is the first task that a user faces after buying or resetting a router. Without access to the control panel, it is impossible to configure Wi-Fi, change the password, update the firmware or optimize the network for gaming and streaming. However, many users are lost in the authorization stage: IP-address is not opened, then the standard login / password is not suitable, then the browser gives a connection error.

In this article, we will discuss all the current ways to log into Xiaomi modems (including Mi Router models). 4A/4C/AC2100, AX3600, AX6000 And others, explain why you might be blocked, and show you how to reset if you forget your login details. IP-addresses DNS Xiaomi routers are used, and how to get around typical errors ERR_CONNECTION_REFUSED or endless page loading.

1. Standard data for entering the Xiaomi modem

Most Xiaomi routers use the same factory credentials, but there are nuances depending on the model and firmware version.

• 🔹 IP-address: 192.168.31.1 (main) or miwifi.com (alternative domain)
• 🔑 Login: Admin (for older models) or binding to a Mi Account (for newer models)
• 🔐 Password: Admin (default) or Wi-Fi password (if changed)

Important: Starting with the MiWiFi ROM 2.0+ firmware (2021 and later), many Xiaomi models require authorization through Mi Account – the same account used in Redmi or POCO smartphones. If you did not link the router to an account, try standard data.

💡

If the miwifi.com domain does not open, try entering IP-address directly to the browser address bar. Some providers block domain name transitions on the local network.

If your router requires SMS-confirmation at login, but you didn't tie your phone number, the only way to reset is to have a physical Reset button on the case.

2. Step-by-step instructions: how to enter the modem through the browser

The most reliable way is to connect by cable. Here's a step-by-step algorithm.

1. Connect to the router: 🔌 Ethernet cable (recommended for first setup). 📶 Wi-Fi (if the network is already configured) The network name is usually indicated on the sticker at the bottom of the router (for example, Xiaomi_XXXX).

Check the network settings:

On a computer or smartphone, make sure that IP-address is automatically (DHCP). On Windows: Start → Parameters → Network and Internet → Ethernet/Wi-Fi → Adjustment of adapter parameters → Properties IPv4.

Open the browser:

Better use Google Chrome, Mozilla Firefox or Microsoft Edge. type in the address bar 192.168.31.1 or miwifi.com and click Enter.

Sign in:

Enter your username/password (see table above). If you request a Mi Account, use the data from the Xiaomi account associated with the router.

Connect to the router via cable or Wi-Fi|Check the settings IP (automatic DHCP)|Open the browser in incognito mode|Enter 192.168.31.1 into the address bar|Use data to enter from the table above-->

If the page does not open, check:

• 🔌 Cable: It must be connected to the port LAN (not WAN!).
• 🌐 Browser: Clear the cache or try another (e.g. Opera).
• 🔄 Reboot: Turn off the router for 30 seconds and turn it on again.

By Ethernet cable | By Wi-Fi | Through the Mi WiFi | Mobile app I don't know how to connect-->

3. Sign in via the Mi WiFi mobile application

For the Xiaomi AX3600, AX6000 and newer Mi Router versions, it is officially recommended to use the Mi WiFi app (available for Android and iOS).This is more convenient than the browser, especially if you change your settings often.

How to log in via the application:

1. Download Mi WiFi from the App Store or Google Play.
2. Sign in to your Mi Account (the same as on your Xiaomi smartphone).
3. Connect to the router network via Wi-Fi.
4. The application will automatically find your router on the local network.

Advantages of the annex:

• 📱 Convenient interface with Russian language.
• 🔔 Notifications of new firmware.
• 📊 Visualization of traffic and connected devices.

Disadvantages:

• 🚫 No access to advanced settings (for example, DDNS or VPN-server).
• 📵 Requires a stable Internet connection for authorization.

4. Solving Entry Problems: Errors and Their Causes

If you follow the instructions but you can’t log in to Xiaomi’s modem, chances are the problem is one of the following:

The most common mistake is trying to log in from a device that is not connected to the router. For example, if you are connected to the mobile Internet (4G/5G) and not to the Wi-Fi network Xiaomi, the browser will not be able to open 192.168.31.1.

💡

If the router requires SMS-code, but you did not tie the number, the only way out is a complete reset with the Reset button (hold 10)+ seconds).

Another common problem is conflict. IP-If you have another router on your network (e.g., from a provider), it can use the same range of addresses. 192.168.31.x. In this case:

1. Turn off the second router.
2. Or change it. IP-Xiaomi address at 192.168.0.1 (after reset).

5. Reset the Xiaomi modem settings (if you forgot the password)

If you can't log in to a modem because of a lost password or a Mi Account tied, you'll have to reset to factory settings, which will delete all personal data, including Wi-Fi name, passwords and firewall rules.

How to reset your settings:

1. Find the Reset button on the back of the router (usually in the recess).
2. Take a paperclip or toothpick, press and hold the button for 10-15 seconds until the indicators start flashing.
3. Release the button and wait for the reboot (1-2 minutes).

After discharge:

• 🔄 The router is assigned to the factory IP-address (192.168.31.1).
• 🔐 Login/password reset to admin/admin (old-model).
• 📡 Wi-Fi Name Becoming Standard (Xiaomi_XXXX).

💡

If after resetting the router does not distribute Wi-Fi, connect to it via cable and configure the network again through the browser.

Attention! On newer models (AX3600, AX6000), the reset does not untie the Mi Account. If the router was linked to an account, you will need to log in to the same account after the reset or contact Xiaomi support to unlock it.

6. Alternative ways of entering (for experienced users)

If standard methods don't work, you can try alternatives, which require technical knowledge, but sometimes help in difficult situations.

Method 1: Connecting to Telnet/SSH

Some Xiaomi firmware allows you to connect over SSH to control via the command line.

1. Install PuTTY (Windows) or use a terminal (Linux/macOS).
2. Enter the command: ssh admin@192.168.31.1
3. The default password is the same as for the web interface (admin or password from Wi-Fi).

Warning! SSH can break the warranty and open up security vulnerabilities, and only use this method if you are confident in your actions.

Method 2: Change IP-hand-mail

If the router does not respond to 192.168.31.1, try:

1. On the computer, set a static IP-range 192.168.31.x (for example, 192.168.31.100).
2. Enter alternative addresses in your browser: 192.168.0.1 10.0.0.1 mifi.xiaomi.com

Method 3: Firmware through TFTP (for recovery)

If the router is not loading or constantly restarting, you can try to reflash it through TFTP. This is an extreme measure that requires special software and firmware.

7. Frequent Questions and Answers (FAQ)

8 Conclusion: Which way to enter?

The choice of method depends on the router model and your tasks:

• 🖥️ For the first setup: use the browser and Ethernet cable.
• 📱 For regular management: more convenient mobile application Mi WiFi.
• 🔧 For advanced settings: web interface via 192.168.31.1.
• 🔄 If you forget your password: Reset button (but remember about binding to Mi Account).

If you encounter an error that is not described in the article, check:

• 📡 Status of indicators on the router (whether they are burning, flashing or fading).
• 🔌 Correct cable connection (especially if you use optical input).
• 📋 Router Logs (in the web interface in the System section) → Magazines).

Setting up a Xiaomi router can seem complicated only at first glance, and following this instruction will not only allow you to log into the control panel, but also optimize the network for your needs - whether it is gaming, streaming or working with a smart home.