How to log into the web interface of the Xiaomi router: all ways and solutions to errors

Logging into the control panel of the Xiaomi router is the first step to set up Wi-Fi, change password, update firmware or optimize the network. IP-The address doesn't open, the factory login doesn't work, the browser gives an error. In this article, we'll discuss all the current ways of entering for Mi Router models. 4A, 4C, 5, AX3000, AX6000 and other, and solve typical problems that hinder access.

Xiaomi routers have the flexibility to set up via the web interface or the Mi Wi-Fi mobile application. But if the application is unstable (for example, due to blocking in Russia), the web version remains a reliable option. We will describe the step-by-step steps in detail, provide a table with the default login data and explain how to restore access if you forget your password or the router is “not visible” on the network.

1.Preparation for the entrance: what to check before the beginning

Before you try to enter the settings, make sure that the basic conditions are met, and ignoring them is the cause of 70% of login errors.

• 🔌 The router is on and the power indicator is on steady (no flashing). AX6000 and AX3000 Check that the switch on the back is in the position ON.
• 📡 Connect to your router: use an Ethernet cable (recommended for the first setup) or connect to the router's Wi-Fi network!
• 🖥️ Sign-in device: PC, laptop, tablet or smartphone with the current version of the browser (Chrome, Firefox, Edge). Avoid Safari - it can block scripts of the control panel.

If you connect over Wi-Fi, make sure your device receives IP-address (DHCP). On Windows, check this out in the Control Panel → Network control centre → Change of adapter parameters → Properties (of your connection) → IPv4. There's gotta be a checkmark on getting it. IP-Address automatically and get the address DNS-server.

💡

If Xiaomi's router is new and not yet configured, try connecting to its factory Wi-Fi network. Xiaomi_XXXX or MiRouter_XXXX, a the password is shown on the sticker from the bottom of the device.

2. Standard IP-Addresses and login data for Xiaomi routers

Most Xiaomi models use one of three models IP-Addresses to access the web interface. Try typing them in turn into the browser address bar:

• 🌐 192.168.31.1 – the main address for most Mi Router routers (4A, 4C, 5, AX3000, AX6000).
• 🌐 192.168.0.1 – Alternative address, can be used in some regional firmware.
• 🌐 miwifi.com – a domain name that redirects to a local IP. It only works when connected to the router network.

If none of the addresses open, check your network settings or use the ipconfig (Windows)/ifconfig (macOS/Linux) command to determine the default gateway.

C:\Users\YourName> ipconfig


...




Wireless Wi-Fi Adapter:




Main gateway.......... 192.168.31.1

This address (the main gateway) is your router’s IP.

3. Step-by-step instructions: how to go to the settings of the Xiaomi router

Consider a universal login algorithm via a web interface. If you have a model that is linked to a Xiaomi account (such as the AX6000), skip the steps with the login / password input - the system will redirect you to the authorization page via Mi Account.

Connect to the router via Wi-Fi or cable|Open the browser (Chrome/Firefox/Edge)|Clear the browser cache (Ctrl)+Shift+Del)|Shut down. VPN/Proxies (if you use them)|Try an alternative browser for errors-->

1. Open your browser and type in the address bar 192.168.31.1 (or the alternate address from the table above).
2. If an unsafe connection warning appears (due to a self-signed certificate), click Additional → Go to the site (in Chrome) or a similar button in another browser.
3. Enter the login and password: For older models (4A, 4C): login is admin, password is admin or blank (AX3000, AX6000): Sign in through your Xiaomi account (email/phone + password).

Once you're signed in, you'll see the main page with network information, and you can set up Wi-Fi, guest network, parental controls, and other settings.

Through the Web Interface (192.168.31.1)|Through the Mi Wi-Fi app|Through miwifi.com|Another way.-->

Attention! On Xiaomi routers with firmware for the Chinese market (for example, the model with the CN suffix), the web interface can be blocked, in which case the configuration is possible only through the Mi Wi-Fi mobile application (Chinese Mi Account is required).

4. Problem Solving: What to do if you can not go

If the login page does not open or gives an error, use this troubleshooting instruction.

⚠️ Note: If the Xiaomi router was previously configured via the Mi Wi-Fi app, the web interface can be disabled for security reasons. → Additionally. → Web administration).

4.1 The page does not open (the error "Site is not available")

• 🔄 Restart the router: turn off the power to 30 Then turn it on again. 1-2 minutes until the indicators stabilize.
• 📡 Check Connection: If you use Wi-Fi, try connecting via cable (and vice versa).
• 🛡️ Disable Firewall/Antivirus: They Can Block Access to Local IP. Temporarily deactivate them.
• 🔧 Reset network settings on your device: Windows: Settings → Network and Internet → Network reset. Android: Settings → System system → Reset → Resetting Wi-Fi, Mobile Network and Bluetooth.

Inappropriate login or password

If you have changed the factory data for entry and forgot it, there are two options:

1. Reset to factory settings: Press and hold the Reset button (usually located on the back) for 10-15 seconds until the indicators start flashing. Release the button and wait for the reboot (2-3 minutes). Connect to the router network and log in with the factory data (admin/admin or see the table above).
2. Recovery via Mi Account (for new models): Open the Mi Wi-Fi app. Select your router from the list of devices. Click Forgot the password? and follow the instructions to reset via the linked email/phone.

💡

Reset will return all settings to factory settings, including Wi-Fi name and password, port settings and parental controls. You can back up the configuration under Settings → Backup (if available).

Error "Incorrect certificate" or safety warning

This problem arises from the self-signed certificate that the router uses to HTTPS-Connections. Solutions:

• 🔒 In the browser, click Additional → Go to the site (not safe) (Chrome) or Accept risk and proceed (Firefox).
• 🌐 Try using it. HTTP instead HTTPS: enter http://192.168.31.1 (without s after http).
• 📱 Use a different browser (e.g. Edge instead of Chrome).

5. Alternative login methods: mobile application and Telnet/SSH

If the web interface is not available, try these methods.

5.1 Entry via Mi Wi-Fi app

The app offers more features than the web version, but requires a Xiaomi account:

1. Download Mi Wi-Fi from the App Store/Google Play (or from the official Xiaomi website if the app is blocked in your region).
2. Sign in to your Mi Account.
3. Click Add Device and select your router from the list.
4. Follow the instructions on the screen to connect.

⚠️ Note: In some regions (e.g. Russia) the Mi Wi-Fi app may require VPN Use reliable services (e.g. ProtonVPN) and connect to servers in Hong Kong or Singapore.

5.2. Access through Telnet/SSH (power-user)

This method is suitable for advanced configuration or access recovery if the web interface is blocked.

• 🖥️ Computer with Windows/Linux/macOS.
• 🛠️ Client: PuTTY (Windows) or embedded terminal (Linux/macOS).
• 🔑 Login/password for Telnet (default: root and password from sticker or admin).

Instructions for Windows:

1. Download and install PuTTY from the official website.
2. Run the program and enter 192.168.31.1 (or another IP router) in the Host Name field.
3. Select the Telnet connection type (port 23) or SSH (port 22 if enabled in the settings).
4. Press Open and enter the login/password when requested.

Once you log in, you'll have access to the router's command line.

# View current Wi-Fi settings


nvram show | grep ssid




Router reboot



reboot




Reset to factory settings



firstboot




y

6. Set up remote access to the router (for experienced)

If you need to control a Xiaomi router from anywhere in the world (for example, to monitor the network or reboot), you can configure remote access. Careful: this reduces the security of the device!

Instructions:

1. Go to the router's web interface (192.168.31.1).
2. Go to Settings → Additional → Remote access.
3. Enable the option Remote Control.
4. Specify the port to connect (by default 8080 for HTTP or 8443 for HTTPS).
5. Save the settings and restart the router.

Now you can connect to the router on the external IP-address (can be found on the website) 2ip.ru) port-specification, for example: http://yours_ip:8080.

⚠️ Attention: For security: Use a complex password for the web interface. HTTPS instead HTTP. Restrict access by IP in the settings of the firewall (Settings) → Security → Filtration IP).

7. Frequent errors and their solutions

Collected typical user problems and ways to fix them.

FAQ: Answers to popular questions