How to enter the settings of the Xiaomi router in the Wi-Fi repeater mode: IP, login

Using Xiaomi router as a Wi-Fi repeater is a popular solution to expand network coverage without buying additional equipment. However, after switching the device to repeater mode, many users face the problem: The standard way to log into a web interface (via 192.168.31.1 or miwifi.com) stops working. IP-Address when activating Repeater Mode.

In this article, we will discuss all working methods for accessing the Xiaomi Mi Router settings (including the Mi Router models). 4A/4C/4Q/AC2100 In repeater mode, explain why standard addresses don't open, and show you how to avoid common errors. IP-The router’s address on the main router’s network and what to do if the web interface is not available even after a reset.

Why can’t you go to the Xiaomi router in repeater mode?

The main reason is a change in network configuration. In repeater mode, Xiaomi router:

• 🔄 Connects to the main router network as a client, rather than creating its own network (unless the mode is turned on) AP + Repeater).
• 📡 Get it. IP-address DHCP The main router, rather than using the standard 192.168.31.1.
• 🔒 Can block access to the web interface due to subnet conflict or security settings.

In addition, in some firmware (for example, on Mi Router). 4A Gigabit Edition: The repeater function is implemented through a simplified interface, where some of the settings are hidden, which makes it difficult to access advanced settings.

Ways to determine IP-Xiaomi router address in repeater mode

To go into the settings, you first need to find the relevant IP-The address of the device. Here are 4 working methods:

1. Through the web interface of the main router

The most reliable way is to check the list of connected devices on the main router:

1. Open the control panel of the main router (usually at 192.168.0.1 or 192.168.1.1).
2. Go to section. DHCP Clients List, Connected Devices or similar.
3. Find a device called Xiaomi or MAC-address of your router (specified on the sticker).
4. Copy. IP-The address in front of it is the actual address for the entrance.

2. Through the command line (Windows/macOS/Linux)

Use the arp command. -a ping + arp:

ping 192.168.x.255 # (where x is your subnet, such as 0 or 1)


arp -a | findstr "Xiaomi"

Nana macOS/Linux replace findstr with grep.

3. via the Mi Wi-Fi mobile app

If the router is linked to a Xiaomi account:

• 📱 Open the Mi Wi-Fi app (available for Android and iOS).
• 🔍 Go to the Devices section → Choose your router.
• 🌐 Press three points (⋮) → Settings → Local area network. This will show the current network. IP.

4. Through network scanning (advanced method)

Use tools like Advanced IP Scanner (Windows) or Fing (mobile devices) to scan the local network. Xiaomi router is usually displayed with manufacturer Xiaomi Communications Co Ltd.

Connection to the main router network (not to the repeater network)|Shutdown VPN/proxy on the device|Correctness of input IP-addresses (without typos)|Updating the router firmware to the latest version-->

Standard and alternative addresses for entry

If you found IP-router address, try the following access options:

⚠️ If you try to log in you see the control panel of the main router, and not Xiaomi – it means, IP-Address misidentified. Check the list of connected devices again.

Login and password for logging in repeater mode

After you found the right one. IP-The address, the system will request authorization:

• 🔑 Standard Password (if not changed): Admin + Password from the router sticker (usually 8 characters, such as 12345678).
• 📱 If the router is linked to a Xiaomi account, you may need to log in via Mi Account (login / password from Xiaomi). ID).
• 🔄 In repeater mode some models (Mi Router) 4A) Allows you to log in only through the Mi Wi-Fi app.

If you forgot your password:

1. Press the Reset button on the router (hold 5-10 seconds until the indicator blinks).
2. Connect to the router directly (via Wi-Fi or LAN).
3. Use the standard. IP 192.168.31.1 and login/password from the sticker.

Solving common errors at the entrance

If the page does not open or gives an error, check the following points:

⚠️ Attention: Mistake ERR_CONNECTION_TIMED_OUT This often means that Xiaomi’s router is not responding to requests due to conflict. IP or off-duty HTTP. Try connecting via cable. LAN instead of Wi-Fi.

If the Xiaomi router in repeater mode does not appear in the list of devices of the main router at all:

• 🔌 Restart both routers (main and Xiaomi).
• 📶 Check that the repeater function is activated (the indicator should be blue or green, not orange).
• 🔄 Try to turn on the repeater mode again via Mi Wi-Fi.

💡

If the Xiaomi router does not want to work in repeater mode with some router models (for example, TP-Link or other routers). ASUS), Try manually specifying a Wi-Fi channel on the main router (e.g., channel 6 instead of Auto) to solve the problem of unstable connection.

Set up Xiaomi router in repeater mode after login

Once you're successful, you'll see a simplified interface. Here's what you can configure:

• 📶 Repeater network name: by default the same as the main network, but you can specify your own (for example, MyWiFi_Ext).
• 🔒 Password: Must match the password of the main network (or you can set a separate one).
• 📡 Wi-Fi channel: If the signal is weak, select the channel manually (e.g. 1 or 11 for 2.4 GHz).
• 🔄 Mode of operation: on some models (Mi Router) AC2100) choose AP + Repeater for simultaneous operation as an access point and repeater.

⚠️ Note: In repeater mode, some functions are disabled, for example:

• 🚫 Guest network.
• 🚫 Parental control.
• 🚫 IPTV (firmware).

If you need these features, consider alternative ways to expand your network, such as:

• 🔗 Bridge mode (WDS) — if the main router supports.
• 📡 Mesh-network (for models Xiaomi AIoT Router) AX3600 newer).

💡

In repeater mode, the Xiaomi router loses some of the functions, but it provides stable signal amplification without additional wires. AP (access point) with cable connection.

Alternative ways to control the router in repeater mode

If the web interface is not available, try these methods:

1.Through the Mi Wi-Fi app

The app often works even when the web panel is not:

1. Open Mi Wi-Fi and select your router.
2. Go to Settings → Mode of work.
3. Here you can change the repeater settings or return the router to normal mode.

2. Through SSH (for advanced users)

On some firmware (for example, OpenWRT or Padavan) you can connect to the SSH:

ssh root@[IP_router

Password: Admin (or your current password)

Then use the commands:

nvram show | grep repeater # View repeater settings


uci show wireless # View Wi-Fi settings

3. via Telnet (if enabled)

On standard firmware, Xiaomi Telnet is usually disabled, but it can be activated via Mi Wi-Fi:

1. In the app, go to Advanced Settings → For developers.
2. Turn on Telnet.
3. Connect via the command: telnet 192.168.x.y.

FAQ: Frequent questions about accessing the Xiaomi router in repeater mode