How to go to the settings of the router Xiaomi 4: 3 proven ways

The Xiaomi Router 4 (or Mi Router 4) is a popular networking device with extensive customization options, but many users have difficulty connecting to its control panel for the first time. AX3600, The fourth version does not automatically redirect to the login page via the Mi Wi-Fi app, which causes confusion.This article will help you figure out how to properly log into the router's web interface, even if you forgot IP-address, login or password.

We’ll look at all the current ways to access the device – through a browser, a mobile app, and alternative methods for cases where standard instructions don’t work. We’ll focus on common errors, such as when the login page doesn’t open or the router doesn’t respond to 192.168.31.1. If you just bought the device or reset it to factory settings, here you’ll find step-by-step steps based on the latest firmware updates from 2026.

1. Standard browser input: step-by-step instructions

The most versatile way to go into the settings of Xiaomi Router 4 is to use the web interface through any browser (Chrome, Firefox, Edge). IP-router address and authorization data.

Follow these steps:

1. Connect to the router network – connect your computer or smartphone to a Wi-Fi network Xiaomi_XXXX (where XXXX — unique symbols of your device or connect to one of the cables LAN-port.
2. Open the browser and enter one of the IP: 🔹 192.168.31.1 – the main address for most Xiaomi routers; 🔹 miwifi.com – an alternative domain (works if you want to use it) DNS rightly); 🔹 192.168.1.1 - Backup (sometimes used after discharge).
3. Enter your login and password: 🔐 Login: admin; 🔐 Password: Admin or the one listed on the sticker under the router.

If the page does not open, check:

• 🔌 Network connection (wi-fi indicator or LAN burn);
• 🌐 Correctness of the introduced IP (Misprints are a common cause of error);
• 🔄 Turn it off. VPN or proxy in the browser – they can block access.

⚠️ Warning: If you have previously changed your password and forgotten it, the only way to restore access is to reset the router to the factory settings. To do this, press the Reset button for 10 seconds (before the indicator flashes!

2. Entry through the Mi Wi-Fi application: pros and cons

The official Mi Wi-Fi app (available for Android and iOS) offers a convenient way to manage the router, but has limitations, such as not always working correctly with the Xiaomi Router 4 on older firmware versions or after manually changing network settings.

How to log in via the application:

1. Download Mi Wi-Fi from Google Play or App Store.
2. Connect your smartphone to the router’s Wi-Fi network.
3. Run the app and wait for the device to automatically detect if the router is not found: 🔍 Click Add Add Manually; 🔐 Enter the Wi-Fi password (default is indicated on the sticker).

Advantages of the annex:

• 📱 Convenient interface for a smartphone;
• 🔄 Quick switching between basic settings;
• 📊 Visualization of traffic and connected devices.

Disadvantages:

• ❌ No access to advanced settings (e.g. Port Forwarding or DDNS);
• ❌ Frequent synchronization errors on old firmware;
• ❌ Requires Xiaomi account registration for some features.

💡

If the app doesn’t see the router, try disabling mobile data on your smartphone – sometimes a network conflict prevents the device from being detected.

3. Alternative ways of entering: if nothing works

If standard methods don’t work, try these options:

Critical detail: if the router was purchased used, the previous owner could have linked it to his Xiaomi account, in which case the reset will not help - you will need to contact support with proof of purchase.

For advanced users, there is another way to connect via Telnet/SSH. However, this method requires technical knowledge and can disrupt the device.

4.Typical mistakes and how to avoid them

Even experienced users sometimes make mistakes when logging into a router.

• 🔌 Connect to another network: Make sure your device is connected to Wi-Fi or LAN-Xiaomi Router 4 port, not another router or mobile Internet.
• 🔒 Antivirus Block: Some antiviruses (such as Kaspersky or Avast) may block access to the control panel. temporarily disable protection.
• 📱 Browser cache: If the login page doesn't load, clear the cache or try another browser (e.g. Firefox instead of Chrome).
• ⚡ Unstable power: The router can "glut" if connected to a poor-quality power supply.Try another adapter with parameters 12V/1A.

Another common problem is conflict. IP-If you have another device on your network with 192.168.31.1 (such as a second router), access to Xiaomi Router 4 will be blocked:

1. Disable all network devices except the Xiaomi Router 4.
2. Change the IP of the second router in its settings (for example, to 192.168.31.2).

💡

If the router flashes orange, it is a sign of hardware malfunction or firmware failure, in which case you cannot log in until the problem is fixed.

5. Set up the router after the first login

After successfully entering the control panel, we recommend you to perform basic settings for security and stable operation:

1. Change the administrator password: Go to Settings → System → Password; Come up with a complex password (at least 8 characters with numbers and letters).
2. Update the firmware: In Settings → Firmware, check the version’s relevance; if an update is available, install it (don’t turn off the router during the process!).
3. Set up Wi-Fi: Change Network Name (SSID) and Password to Settings → Wi-Fi; Select 802.11ac mode for maximum speed; Disable WPS is a vulnerable protocol.

To improve safety, we also recommend:

• 🔐 Activate Filtration MAC-Addresses (Settings section) → Security);
• 🌐 Disable remote control (Settings) → Remote access);
• 📡 Set up a guest network for visitors (separate password, limited access).

6. Frequent Questions About Xiaomi Router 4