How to log into the settings of the Xiaomi router from your computer: all ways and solutions to problems

Logging into the web interface of the Xiaomi router from a computer is the basic procedure that is required to configure Wi-Fi, change password, update firmware or optimize the network. The router does not open the authorization page, the login / password is forgotten or IP-The device address changed after the reset, and in this article we will discuss all the current ways to log in to the settings of the Mi Router, Xiaomi AIoT Router and other models, including solutions to typical problems.

Feature of Xiaomi routers – the use of non-standard IP-addresses (e.g. addresses, 192.168.31.1 opportunistic 192.168.1.1) And we'll be able to link to your Mi Account in new firmware, and we'll explain in detail how to connect to the control panel through the browser, what to do if the page doesn't open, and how to reset to factory settings if access is lost. 4A/4C/4Q, Xiaomi Router AX1800/AX3000/AX6000 others.

Before you start, make sure your computer is connected to the router via cable (recommended) or Wi-Fi. If the connection is missing, check the indicators on the device body: burning SYSTEM (blue/orange) means operability, flashing INTERNET - problems with the provider.

1. Standard method of entry through IP-address

The most reliable method is the use of IP-The default for most Xiaomi models is 192.168.31.1, but in some firmware it may be different:

1. Connect your computer to the router with a LAN cable (a port usually yellow) or via Wi-Fi.
2. Open any browser (Chrome, Firefox, Edge) and type in the address bar: http://192.168.31.1 Press Enter.
3. If the address is not suitable, try alternatives: 🔹 http://miwifi.com (official domain of Xiaomi) 🔹 192.168.1.1 (obsolete) 🔹 192.168.0.1 (rare but occurring)

login

• 🔑 Login: admin
• 🔑 Password: Admin or field is empty (depending on the model)

If you have previously changed login details, use your accounts. New firmware (such as the Xiaomi Router AX6000) may require authorization through Mi Account, as you can read in the next section.

2. Authorization through Mi Account (for new firmware)

Starting in 2021, Xiaomi has introduced mandatory routers binding to a Mi Account in some regions, which means that instead of a standard login / password, the system will ask for:

• 📧 Email or phone number linked to Mi Account.
• 🔐 Password from the account.
• 📱 Confirmation through SMS Mi Home app (if two-factor authentication is enabled).

If you do not remember your account information:

1. Go to account.xiaomi.com and restore access via email or phone.
2. Make sure the router is connected to the Internet (the INTERNET indicator is green/blue).
3. If the binding does not work, try resetting the router to the factory settings (button) RESET 10 seconds).

⚠️ Note: After resetting, all Wi-Fi settings, ports and guest networks will be deleted. save the configuration to a file in advance (System section). → Backup, if possible.

3. How to find out. IP-Router address if standard does not work

If neither 192.168.31.1 nor miwifi.com opens the control panel, it is possible to, IP-The address was changed manually or assigned DHCP-ISP server. Here's how to find it:

Method 1: Through the command line (Windows)

1. Press Win + R, enter cmd and press Enter.
2. Enter the command: ipconfig /all
3. Find the main gateway line - that's it. IP-router.

Method 2: Through the terminal (macOS/Linux)

1. Open the Terminal.
2. Enter: netstat -rn | grep default
3. IP-The address after the word default is the gateway.

Method 3: Through a mobile application

Install Fing (Android/iOS) or WiFi Analyzer, connect to the router network and check the Gateway section.

💡

If the router gives an error "Page is not available", try clearing the browser cache or using incognito mode. Sometimes changing the browser (for example, from Chrome to Firefox) helps.

4. Solving problems with access to the control panel

If, after input, IP-Browser addresses give an error (ERR_CONNECTION_TIMED_OUT, The site is not available, check the following points:

• 🔌 Router power: Make sure the cable is connected to the socket and the indicator POWER burn.
• 🔄 Reboot: Disconnect the router from the network for 30 seconds, then turn it on again.
• 🖧 PC network settings: Make sure IP-The computer address is automatically received (DHCP). For that:

1. On Windows: Start → Parameters → Network and Internet → Ethernet/Wi-Fi → Adjust the adapter settings. Right-click on the connection button. → Properties → IP version 4 (TCP/IPv4) → Choose Get Get. IP-address.
2. On macOS: System settings → Network → Additional → TCP/IP → install Use DHCP.

If the problem persists, check:

• 🛡️ Firewall/antivirus: temporarily disable them and try again.
• 🔧 Another device: Try accessing from your phone or tablet - if it works there, the problem is in the PC.
• 🔄 Router reset: Press the button RESET 10-15 seconds (before flashing indicators).

⚠️ Warning: After resetting, all settings, including Wi-Fi password, will return to factory. If the router was linked to Mi Account, you will need to re-authorize.

5. Alternative ways of entering (Telnet/SSH, mobile)

If the web interface is not available, you can try alternative management methods:

Method 1: Using Mi WiFi (Android/iOS)

1. Download the official Mi WiFi app from the App Store or Google Play.
2. Connect to the router network via Wi-Fi.
3. Open the app and follow the authorization instructions (Mi Account may be required).

Method 2: Telnet/SSH (for power users)

Some Xiaomi models (such as the Mi Router 3G) support remote control via the console.

1. Install PuTTY (Windows) or use the built-in terminal (macOS/Linux).
2. Connect to IP-router address SSH (port).
3. Enter the username/password (often root/admin by default).

Important: Using SSH can violate warranty and lead to unstable router operation.This method is recommended only for advanced users.

Method 3: Through Xiaomi's proprietary software

For some models (for example, Xiaomi Router AX6000) there is a desktop application Mi Router Manager. Download it from the official website and follow the instructions.

Make sure the router is online |Try another browser or device |Check your IP settings (DHCP) |Reset your router with the RESET button |Update your firmware via Mi Home (if possible)

-->

6. Update firmware and reset password

If you forgot the password from the router or the web interface is not working correctly, it will help to update the firmware or reset settings.

Firmware update

1. Download the latest firmware version for your model from the official Xiaomi website (support section).
2. Log in to the router control panel, go to System → Firmware Upgrade.
3. Download the firmware file and wait for the process to complete (don’t turn off the power!).

Password reset

If you have forgotten the entry data:

1. Press and hold the RESET button on the back of the router for 10-15 seconds (until the indicators flash).
2. After restarting, use the standard login/password (admin/admin).
3. If the router is linked to Mi Account, you will need to log in through your account.

⚠️ Note: On models with MiWiFi firmware ROM (Like Mi Router. 4A) After resetting, you may need to reconfigure the Internet connection (input data from the provider).

💡

Resetting your router to factory settings is a last resort, always try to restore access through Mi Account or Mi WiFi first.

7. Frequent errors and their solutions

Let’s look at the typical problems and ways to solve them:

If none of the methods worked, the router may have a hardware malfunction, in which case contact the Xiaomi service center or the seller (if the device is warranty).

FAQ: Answers to popular questions