Entrance to the admin panel of the Xiaomi router: all ways and solutions of errors

Owning a Xiaomi router gives you access to advanced network settings, from prioritizing traffic to creating guest networks. However, many users face difficulties already at the stage of logging into the admin panel: the router does not respond to the standard 192.168.31.1, forgotten password, the browser gives a connection error. This article will examine all the current ways to log into the Mi Router, AX3600, AX6000 and other models, including solutions to typical problems.

We have analyzed official instructions of Xiaomi, user reviews on forums (including: 4PDA Mi Community and tests on firmware devices from 2023 to 2026, with special attention to hidden features that the manufacturer does not advertise: for example, alternative ones. IP-Addresses to access or bypass locks through the Mi Wi-Fi app. If you've tried unsuccessfully to go into settings before, here's a system solution.

1. Standard method of entry: IP-address and authorization data

Most Xiaomi routers use a web-based management interface accessible via local IP-Basic parameters for entry:

• 🌐 Panel address: 192.168.31.1 (main) or miwifi.com (alternative domain).
• 🔑 Login: Admin (default).
• 🔒 Password: Indicated on a sticker under the router (usually 8 characters, such as 12345678).

If the sticker is erased or the password has changed, try the combinations in the table below. Note: on newer models (such as the AX6000), the default password may match the network SSID (the Wi-Fi name).

Important: If the router is connected to the Internet via PPPoE (for example, the provider Rostelecom or Beeline), the password to log in to the admin may differ from the password to connect to Wi-Fi. In this case, use the data from the sticker.

⚠️ Note: On models with MiWiFi firmware ROM (Chinese version) the default password can be in Chinese. Try entering 12345678 or copy characters from the sticker without converting.

2. Alternative ways of entering: application and SSH

If the web interface is not available, use the official Mi Wi-Fi app (available for Android and iOS) that allows you to control the router without input. IP-address, but requires:

• 📱 Connecting a smartphone to the router network (via Wi-Fi or cable).
• 🔄 Xiaomi account (unless previously linked device).
• 🔄 Access to the cloud (for remote management).

Instructions for entry through the application:

1. Download Mi Wi-Fi from Google Play or App Store.
2. Connect to the router network.
3. Open the app and select your Mi Router from the device list.
4. Enter the password from the sticker (if requested).

For advanced users, SSH is available (only on supported firmware).

ssh root@192.168.31.1

The default password for SSH often matches the password for the web interface. Chinese firmware may require a password or 12345678.

3. Solving Access Issues: The Router Does Not Open the Page

If, on input, 192.168.31.1 browser issues an error (ERR_CONNECTION_REFUSED, The site is not available, check the following points:

Check your router connection (Wi-Fi/cable)| Disable VPN or proxy in your browser | Clear the DNS cache (ipconfig/flushdns in CMD) | Try another browser (Chrome, Firefox, Edge) |Reboot the router (Reset button for 10 seconds)

-->

Typical causes and solutions:

• 🔌 Incorrect connection: Make sure your device is connected to the router directly (not through a repeater or Mesh system.
• 🔄 Conflict IP: If the router has a 192.168.31.1 address and your computer — 192.168.31.X, change IP Automatic Receipt PC (in Connection Properties).
• 🛡️ Firewall Block: Temporarily disable the antivirus or Windows firewall (Control Panel) → Firewall Windows Defender).

If the router previously worked but now does not open the panel, the settings may have gone wrong after updating the firmware, in which case the factory reset will help (see section 5).

⚠️ Note: Some Xiaomi firmwares block access to the web interface if the router is connected to the cloud through the Mi Account. To unlock, untie the device in the Mi Wi-Fi application (Device Management section).

4. Password reset and access restoration

If you forget the password from the admin panel, there are two ways to reset it:

1. Software reset (if you know the current Wi-Fi password):
2. Hardware reset (if the password is unknown):

Important: Hardware reset will return the router to factory settings, including:

• 📡 Wi-Fi name and password.
• 🔌 PPPoE settings (if used).
• 📱 Tied devices in Mi Home.

After the reset, we recommend:

1. Update the router firmware through Settings → Software update.
2. Change the password of the admin panel to a complex one (at least 8 characters, with numbers and letters).
3. Create a backup of settings in Settings → Backup.

5. Set up the router after the first login

After successfully entering the admin panel, we recommend you to perform the basic setting for optimal operation:

1. Change the Admin Panel password: Go to Settings → Device Management → Password. Set a new password (example: Xiaomi@2026!).
2. Update the firmware: In Settings → Software Update, check the version’s relevance. If an update is available, install it (the router will restart automatically).
3. Set up Wi-Fi: In Settings → Wi-Fi Change Network Name (SSID) and Password. Select 802.11ax (Wi-Fi 6) mode for compatibility with new devices.

Additional options are available for advanced users:

• 📊 Traffic Prioritization (QoS): Set up in Settings → QoS to speed up online games or video calls.
• 🔒 Guest Network: Create a separate network for guests in Settings → Guest network.
• 🌍 VPN-server: On models AX3600/AX6000 You can also deploy WireGuard or OpenVPN.

💡

If you have a Xiaomi AX6000, activate OFDMA in your Wi-Fi settings, which will improve network performance when connecting multiple devices (especially in a smart home).

6. Frequent errors and their elimination

Let’s analyze the typical mistakes that users face when logging into the admin Xiaomi:

If the router gives an error, "The device is linked to another account," it means that it was previously configured through Mi Account.

1. Open the Mi Wi-Fi app.
2. Go to Profile. → My devices.
3. Find the router and press Untie.
4. Connect to the router again (password from the sticker).

Tip: If you bought a router with your hands, ask the previous owner to untie it from your Xiaomi account, otherwise some features (such as cloud management) will not be available.

💡

On Xiaomi routers with MiWiFi ROM firmware (Chinese version), the web interface can be blocked without linking to the account, in which case you need firmware for the global version of the software.

7.Security: How to protect the admin panel from hacking

Xiaomi routers are often targeted for hacker attacks due to standard passwords and firmware vulnerabilities.

• 🔐 Change the password to a complex one (example: X!a0m1R@ut3r2026).
• 🌐 Disable remote access to Settings → Device control → Remote access.
• 🔄 Update your firmware regularly (enable automatic update checks).
• 🛡️ Set up a firewall in Settings → Security → Firewall.

Additional measures for advanced users:

• 📡 Turn it off. WPS (vulnerable to brute force attacks).
• 🔒 Use it. VPN to access the control panel from the outside.
• 📊 Include event log in Settings → Systemic tools → Log to track suspicious connections.

If you suspect that the router has already been hacked (for example, unknown devices appear on the network or change settings), do:

1. Reset to factory settings.
2. Update the firmware to the latest version.
3. Change passwords for Wi-Fi and admin panel.

Frequently Asked Questions (FAQ)