Finding the right address to log into your router settings is often the first step when setting up your home network, but users of Xiaomi devices may face a non-standard situation. Unlike many other manufacturers where standard gateways often coincide, the Mi WiFi ecosystem has its own addressing features that must be considered when you first connect. Understanding exactly how your computer or smartphone interacts with your router is critical for safe and correct settings.
There are several proven methods to determine the current IP-The gateway address, even if the standard options don't work or have been changed by the previous owner, will cover both software methods through the operating system and physical methods, including the use of a mobile application. This knowledge will not only allow you to log into the control panel, but also diagnose problems with your Internet connection.
In this article, we will discuss each of the available options in detail, paying special attention to the specifics of Windows and Android operating systems. You will learn to quickly find the right address and avoid the typical mistakes that beginners often make when trying to log in to the router interface.
Standard. IP-address and domain name
The fastest way to try to get into settings is to use the factory values that are prescribed by the manufacturer by default. For most Xiaomi router models, including the popular Mi Router 3G series, Mi Router 4A and the newer Mi WiFi 6, the main gateway address is the classic combination. However, it is worth remembering that depending on the delivery region and the firmware version, these values can vary.
In addition to numerical designation, engineers have introduced support for an alphabetic domain name, which makes it much easier to access from mobile devices. Instead of remembering numbers, you can simply type a special address into the browser address bar. This method is especially convenient if you are in the range of a Wi-Fi network, but do not remember the exact one. IP-lock-house.
Below is a table with the most common addresses for the different generations of the Chinese giant’s equipment:
| Model router | Standard. IP-address | Domain name | Note |
|---|---|---|---|
| Mi Router 3 / 3G / 3C | 192.168.31.1 | miwifi.com | The most common option |
| Mi Router 4 / 4A / 4C | 192.168.31.1 | miwifi.com | Support for Wi-Fi 5 |
| Mi WiFi 6 (AX3600) | 192.168.31.1 | miwifi.com | An application is required to set up |
| Redmi Router AC2100 | 192.168.31.1 | miwifi.com | Identical to the main Mi series |
⚠️ Note: If the page does not load when you enter 192.168.31.1, do not rush to reset the device.Perhaps your computer is on a different subnet or the address was manually changed when you set up the previous one.
It is important to note that the domain name miwifi.com only works if your device is already connected to or connected to the router’s Wi-Fi network. LAN-Otherwise, the browser will try to find this site on the global network, which will lead to an error or redirection to the official website of the company.
Definition of IP through Windows
If standard addresses don't fit, Windows provides powerful built-in tools for network diagnostics. The most reliable way to find out the current address of the gateway is to use the command line, which displays the actual configuration of the network adapter at a given time, which eliminates any guesswork and shows actual data.
To get the information, you need to start the command console. Press Win + R, enter cmd and press Enter. In the black window that opens, type ipconfig and press Enter again. The system will list all the network connections you need to find active (usually called "Ethernet" or "Wireless Network").
ipconfigIn the list of parameters, find the main gateway line (or Default Gateway in English). The digital code listed opposite this line is the desired one. IP-The address of your Xiaomi router is the address you need to enter in the browser address bar to access the control panel.
An alternative, more visual way is to use the GUI of network connections. Right-click on the network icon in the tray (near the clock), select Network and Internet settings, then go to Adapter Settings. Double-click on active connection will open the status window where you need to press the Information button. In the list that opens, look for the default gateway IPv4.
☑️ Checking Connection in Windows
Sometimes users are faced with a situation where the gateway field displays an address other than the standard 192.168.31.1, which means that the router’s settings previously changed the range of the local network, in which case use the address that the system displays, as it is relevant for the current configuration.
Search for an address on Android and iOS
Mobile devices also allow you to quickly learn IP-The router's address, often even easier to do than on a computer. In Android, network information is hidden deep in the settings of your current connection. Connect to your Xiaomi router's Wi-Fi network, then go to Settings. → Wi-Fi.
Click on the network name or the gear/arrow icon next to it to open up details. Depending on the Android version and shell (MIUI, HyperOS, you may need to deploy Additional or Advanced. Look for the Gateway field or the router listed there. IP-address and there is an address for entering the settings.
Owners of iOS devices (iPhone, iPad) also have access to this functionality. → Wi-Fi. Click on the blue information icon (i) next to the name of the connected network. scroll down to the partition IPv4-The router field contains the necessary IP-address.
⚠️ Note: On some versions of iOS field with IP-The router’s address may be hidden if the phone has not received a full response from the DHCP-Make sure the connection status is active and data is being exchanged.
It is worth noting that on mobile devices with dual-band routers (2.4 GHz and 5 GHz), the gateway address will be the same for both frequencies, since the router acts as a single entry point to the local network regardless of the range.
Why can't there be a Gateway field on the phone?
Use of the Mi WiFi application
Modern Xiaomi routers are sharpened to control through the mobile application Mi WiFi (or Mi Home for some regions), this method is preferred for initial configuration, since the application itself finds the device on the network, even if the standard device is not installed. IP-The address has been changed or unknown to the user.
After installing the application and logging in to the Mi Account, the program will automatically scan the local network. If the router is in setup mode (flashing orange) or is already configured and connected to the phone, it will appear in the list of available devices. Clicking on the router icon, you will be taken to the control panel, where the technical IP-The address for the browser can be specified in the Settings section → Status.
The main advantage of using the application is the ability to remotely control. You do not need to remember or search. IP-address whenever you need to check speed, lock your neighbor, or update your firmware, all features are available through a user-friendly interface linked to the company's cloud service.
💡
Mi WiFi app can find router even if changed IP-Subnet address, as it uses broadcast requests within the local network to detect manufacturers' devices.
However, if your goal is to access advanced settings through a web interface (for example, to skim ports or set up static routes that may be hidden in the app), you’ll still need to use the app. IP-In this case, the application can serve as an auxiliary tool: see the section About the router or Current Network Status LAN IP.
What to do if the IP is changed or unknown
When no standard address is working and the command line is unclear, it often occurs when you buy used equipment or after other users' actions. If the Xiaomi router has been reconfigured and you do not know the new gateway address, the most effective solution is to completely reset the settings to the factory.
To do this, look for the Reset button on the device body. It can be highlighted in a separate color or be signed RST. In some models, such as the Mi Router 3G, this button is combined with an indicator and requires the use of a stationery clip. Press the button on the router on for 5-10 seconds until the indicator starts flashing orange.
Once reset, the router will return to factory settings and its address will again become 192.168.31.1 or miwifi.com. All user settings, including Wi-Fi passwords and ISP data, will be deleted, so be ready to configure the Internet again.
| Action. | The result | Data retention |
|---|---|---|
| Reset button reset | Return to factory settings | No (all removed) |
| Power outage | Temporary disconnection | Yes (settings retained) |
| Reboot through software | System restart | Yes (settings retained) |
⚠️ Warning: Before performing a hardware reset, make sure you have an ISP contract on hand, as a login and password may be required to connect (PPPoE, L2TP).
💡
Hardware reset is a guaranteed way to return access to the router if IP-The address has been changed and forgotten, but it requires a complete reconfiguration of the network.
Typical problems when entering settings
Even if you know the right thing IP-The address, users may encounter errors when trying to log in, and one of the most common problems is the message that the page is unavailable or the timeout of the connection has expired. This often happens if the computer is connected simultaneously to the Wi-Fi router Xiaomi and, for example, to the mobile Internet or other network adapter.
It is also worth checking the settings. DNS. Sometimes handwritten DNS-servers (e.g. Google) DNS 8.8.8.8) may conflict with local name resolution if you are trying to log in via miwifi.com. IP-address.
Firewall or antivirus software on your computer can also block access to the router authorization page, considering it potentially insecure (since the connection is on HTTP, not HTTPS).
If you use VPN-Customer, be sure to turn it off before entering the settings. VPN Redirects all traffic through a remote server, making local addresses like 192.168.x.x inaccessible to your device.