How to Reset the Xiaomi Router Administrator Password: The Complete Guide

It is quite common for users to change standard data for security or simply forget it after the initial installation of the hardware. Xiaomi and Redmi routers have their own login features that can be confusing for the inexperienced user.

Restoring access is not a complicated process, but it requires careful understanding of the difference between resetting a Wi-Fi password and fully returning the device to factory settings. Full Reset deletes all user data, including provider settings, network name and password from the web interface, which is why you need to make sure that all data is available before you start the procedure to reconfigure the Internet.

In this article, we will discuss in detail all available methods to regain control of your router. We will look at hardware reset via a button, software methods and typical errors that occur when you try to log in to 192.168.31.1.

Differences between Administrator Password and Wi-Fi Key

Many users confuse the two different types of security used in network hardware: the first is the wireless security key you type into your phone or laptop to connect to the Internet; the second is the administrator password you need to log into the router's web interface, where DNS settings, ports, and filters change.

When you first set up, Xiaomi Mi Router routers often offer to set the administrator password separately or use the default Wi-Fi password. If you changed this data yourself and forgot it, the default default login (often empty or "admin") will not work.

💡

If you’ve never changed your administrator password manually, try entering your Wi-Fi network password – in many Xiaomi models, they’re synced by default.

It is important to understand that without knowing the administrator password, you will not be able to change the connection type (PPPoE, L2TP, Dynamic IP) or adjust the static IP-The only way out of this situation is to force the reset to factory state, which will return the device to its original security parameters.

Preparation for the resetting procedure

Before you press the reset button, you need to prepare to not be left without the Internet for several hours. You will need a contract with the provider, which indicates the login and password for the connection (if PPPoE or L2TP is used), as well as data for IPTV, if such a service is charged separately.

Also, check the physical connection. Make sure you have an Ethernet cable (LAN) or laptop with a network card, as after a Wi-Fi reset, the network will become open or change its name to standard.This can temporarily interrupt the connection if you control the process wirelessly.

In Russia and CIS, the most common dynamic IP (automatic receipt of an address) and PPPoE (requires authorization) are not superfluous. If you do not know this data, it is better to call the technical support of the provider before you start manipulating the equipment.

Hardware reset via Reset button

The most reliable and versatile way to regain access to Xiaomi router is to use a physical reset button.It is usually located on the back of the device, next to LAN ports and power connector. In some compact models, the reset hole can be recessed into the housing to avoid accidental pressing.

To perform the procedure, you will need a thin object, such as an unbended clip, toothpick or a special needle for SIM-The process is as follows:

• 🔌 Turn the router on the network and wait for the loading to be completed (the indicator should be on even light or flash in normal mode).
• 📍 Find a hole with the Reset label on the back or bottom of the device.
• 🖱️ Press and hold the button inside the hole for 5-10 seconds.
• 💡 Watch the indicator: it should start flashing orange or change the mode of operation, which signals the beginning of the reset process.

⚠️ Warning: Do not release the button immediately after the indicator lights up. Hold it until the router starts to restart, otherwise the reset may not activate and the settings will remain the same.

Once you release the button, the device will automatically restart, which can take 1 to 3 minutes, and it is strongly advised not to turn off the power at this time, as interrupting the recording of the configuration can lead to a software failure.

Entrance to the control panel after reset

Once the reset procedure is successfully completed, the router will return to factory settings, which means that the wireless network name is the same as the router (SSID) will change to a standard, usually containing model of the device, for example, Xiaomi_XXXX. The Wi-Fi password will either disappear (the network will be open) or return to the value indicated on the sticker below the case.

To enter the control panel, you need to connect to this network. Open the browser and enter the standard IP-For most Xiaomi and Redmi models, it’s 192.168.31.1 or the domain name miwifi.com. If the page doesn’t load, check the network adapter settings – they should be in automatic receiving mode. IP (DHCP).

When you first log in, the welcome system will prompt you to reconfigure the router.

1. Select a time zone.
2. Create a new administrator password (remember it!).
3. Set up the parameters of the Internet connection.

It is during the process of creating a new administrator password that you should be careful, and the system may suggest using a Wi-Fi password or creating a unique one, and it is recommended to write the code you have created in a secure place or use a password manager to prevent the situation from happening again.

Resetting the Internet connection again

Once reset, the router forgets all the provider's settings. If your ISP uses Dynamic IP (DHCP), the Internet can start automatically as soon as the WAN cable is connected.

In the configuration interface, select your city or provider name from the list. Xiaomi routers have an extensive base of CIS and European providers. If your provider is not listed, select "Not found on the list" or "Other".

In the window that opens, enter the data from the contract:

• 📝 Connection Type: Select PPPoE if you need a login and password.
• 🔑 Login and password: enter authorization data (not to be confused with a password from Wi-Fi).
• 📡 Cloning MAC-Addresses: if the provider links the Internet to a particular device, cloning may be required MAC-address of an old router or computer.

⚠️ Note: When entering the PPPoE login and password, keep an eye out for the letter register and no unnecessary spaces. An error in one character will result in no network access, although Wi-Fi will work.

After saving the settings, the router will try to establish a connection.The Internet indicator on the case should light up in white or blue (depending on the model), which signals a successful access to the global network.

Common Errors and How to Resolve Them

In the process of access restoration, users often face various technical problems, one of the most common is the inability to open the page 192.168.31.1. IP-Network address or address conflict.

Another common problem is that the router is reset, but the Internet does not appear, in which case you need to check the status of the WAN cable. The WAN indicator should burn. If it flashes or does not burn, check the integrity of the cable coming from the provider and the density of its connection to the blue port (usually).

The table below will help quickly diagnose the status of indicators on the front panel of the Xiaomi router:

💡

If the Internet indicator is yellow after resetting and setting up, the problem almost always lies in the wrong PPPoE login/password or cable break from the provider.

Also worth mentioning is the problem of “cyclical reboot”: If the router is constantly turned off and turned on after reset, the firmware may be damaged or the power supply does not give the desired voltage, in such cases, the software reset will not help, and you will need to flash it through UART or repair the service.

Frequently Asked Questions (FAQ)