The web interface of the Xiaomi router is a control panel where you configure your Wi-Fi network, security, guest access and other settings. However, many users face difficulties when you first log in. IP-The address won't open, the username with the password doesn't fit, the router doesn't respond to the connection at all. In this article, we'll discuss all the current ways to log into Mi Router settings (including models). 4A, 4C, 5, 6, AX3000 Pro and solve typical problems – from resetting a password to restoring access after a crash.
It is important to understand that the login process may vary depending on the firmware version and router model, for example, in new devices (e.g. Xiaomi Router). AX6000) By default, cloud login is used through the Mi Account, and in old ones (like Mi Router). 3G) — Classical Authorization IP. We will look at both options, as well as alternative methods for cases where the standard method does not work.
1.Preparation for the entrance: what to check before the beginning
Before you try to go into your router settings, make sure that the basic conditions are met, and ignoring them is the most common cause of errors.
- 🔌 Connect to a router: use an Ethernet cable (port) LAN) Or connect to the router's Wi-Fi network. Don't try to access the mobile Internet or someone else's network.
- 💻 Device: laptop, PC or smartphone with a current browser (Chrome, Firefox, Edge) Avoid outdated versions (e.g. Internet Explorer).
- 📡 Router status: Power indicator should be blue or green (depending on model) Blinking orange/red means error.
- 🔄 Turn it off. VPN/Proxies: They can block access to the router’s local network.
If you're connected to Wi-Fi, but the settings page doesn't open, try reconnecting to the network or using a cable, and 90 percent of the time, it's by changing the type of connection from wireless to wired.
2. Standard method of entry: through IP-address
The most universal method is input IP-The router addresses in the browser address bar. Xiaomi uses one of three addresses by default:
- 🌐 192.168.31.1 – the main address for most models (Mi Router) 4A, 4C, AX1800 etc.).
- 🌐 192.168.0.1 – Alternate address, may be used after reset or in some regional firmware.
- 🌐 miwifi.com – a domain name that redirects to a local IP (doesn't work).
Step-by-step:
- Open your browser and enter one of the addresses above (e.g. 192.168.31.1).
- If a warning about an “unsafe connection” appears, click More → Go to the site (this is normal for local addresses).
- Enter the login and password (by default, see the table below).
- Press Enter or Login.
| Model router | Login by default | Password default |
|---|---|---|
| Mi Router 4A, 4C, Mini | admin | admin or empty field |
| Mi Router 5, 6, AX1800 | admin | Password from the sticker on the bottom of the router |
| Mi Router Pro, AX3000, AX6000 | Mi Account Account (email/phone) | Password from Xiaomi account |
If the address does not open, check:
- ✅ Correctness of input IP (spaceless, dots instead of commas).
- ✅ Disable Antivirus/Firewall – They Can Block Access.
- ✅ Try another browser or device.
☑️ Checking before entering
3. Sign in via Xiaomi account (for new models)
Starting with the Mi Router AX3000 Xiaomi has implemented authorization through Mi Account, which means that instead of a local login/password, you will need to use the username:
- 📧 Email or phone linked to Xiaomi account.
- 🔑 Password from this account.
- 📱 Confirmation of SMS or through the Mi Home app (if two-factor authentication is enabled).
How to get in:
- Enter 192.168.31.1 or miwifi.com.
- Select Sign in via Mi Account (or similar).
- Enter your email/phone and password.
- Confirm the entrance through SMS Notification to Mi Home (if requested).
If you have forgotten your account data, restore it to the official account.xiaomi.com. Without access to Mi Account, you will not be able to manage new series routers - this is a security measure from Xiaomi.
💡
If the router has requested a confirmation code, but SMS Check the Mi Home app – sometimes the code comes in the form of a push notification.
4. Alternative methods of entry
If the standard methods don’t work, try one of these options:
Method 1: Using the Mi WiFi (Mi Home) app
The official Mi Home app (formerly Mi WiFi) lets you control your router without input IP-Suitable for all models, including old ones.
- 📱 Download Mi Home from Google Play or App Store.
- 🔍 Select your router from the main menu (it should show up automatically if you are connected to its network).
- ⚙️ Click on the gear icon (Settings) to access the interface.
Method 2: Through Telnet/SSH (for advanced users)
If the web interface is not available, but the router responds to ping, you can try connecting via Telnet or SSH. It requires technical skills!
telnet 192.168.31.1
login
password: (empty or admin)Warning: This method may violate warranty and cause the router to run unstable. Use only if other methods are exhausted.
Method 3: Through another IP-address
Sometimes the router changes the local router. IP after resetting or updating to find the current address:
- 🖥️ On Windows: Open Command Prompt and type ipconfig.Look for the Primary Gateway line.
- 🍎 Nana macOS/Linux: In the terminal, perform netstat. -rn | grep default.
How to find out the IP router on Android?
5. Solving entry problems
If you followed the instructions but still cannot enter, we will analyze the typical errors and their solutions.
Problem. 1: Page won't open (ERR_CONNECTION_REFUSED)
Possible causes and solutions:
- 🔌 Router not on or faulty: check power, indicators, try another cable.
- 📡 Wrong. IP-Address: Find the current gateway (see section above).
- 🛡️ Firewall blocks access: temporarily disable antivirus (e.g. Kaspersky, Avast).
- 🔄 Conflict IP: hand-appoint IP from the router range (e.g. 192.168.31.100).
Problem 2: Inappropriate login/password
If you have not changed the login data, but the standard admin/admin not working:
- 🔍 Look at the sticker on the bottom of the router – sometimes the password is listed there.
- 🔄 Reset settings with the Reset button (hold 10-15 seconds until the indicator flashes).
- 📧 For new models: use Mi Account (see Section 3).
⚠️ Note: After reset, all user settings (wi-fi name, password, guest access) will be deleted. save them in advance or take a picture.
Problem 3: Router asks for firmware updates before entering
Some models (Mi Router) 4A, AX1800) They block access to the interface if there's a critical update:
- Connect to the router via cable.
- Download the latest firmware from the official Xiaomi Support website.
- Download it through the Update section in the Mi Home app.
| Mistake. | Reason. | Decision |
|---|---|---|
| 404 Not Found | Wrong. IP or the router is not responding | Check the connection, find the current one. IP |
| ERR_CONNECTION_TIMED_OUT | Network conflict or blockage | Turn off the firewall, change the browser |
| "Incorrect password" | Password changed or reset settings | Use the data from the sticker or reset the settings |
6. Reset router settings (if nothing helps)
If all login attempts fail, the last option is a hard reset, which will return the router to the factory settings, including the default login/password.
How to reset your settings:
- Find the Reset button on the back of the router (usually deepened into the case).
- Take a paperclip or toothpick, press and hold the button for 10-15 seconds.
- Release when the indicators start flashing orange/red (reset signal).
- Wait for the reboot (1-2 minutes).
After discharge:
- 🔄 Connect to the router network (name will be available) Xiaomi_XXXX or MiWiFi_XXXX).
- 🔐 Use the default login/password (see the table in Section 2).
- ⚙️ Set up your router again (wi-fi name, password, security type).
⚠️ Attention: On routers with MiWiFi firmware ROM (Like Mi Router. 3G) reset may result in loss of access to certain functions if custom firmware has been installed before. TFTP.
💡
Resetting is a last resort. Before you try all alternative ways of logging in (via app, other app, etc.) IP, Telnet).
7.Security after entry: what to do first
After successfully logging into the Xiaomi router interface, follow these steps to protect your network:
- 🔒 Change the Administrator Password: Go to Settings → Account and set a complex password (at least 8 characters, with numbers and letters).
- 📶 Set up Wi-Fi security: Select the type of encryption WPA2-PSK or WPA3 (in new models. Avoid WEP — It's outdated and unreliable.
- 🚫 Disable Remote Control: in the Settings section → Remote Access Deactivate the Option if You Don’t Use It.
- 🔄 Update the firmware: check for updates in Settings → Update of the PO.
- 👤 Set up a guest network: limit access to the main network in Wi-Fi → Guest access.
We also recommend:
- 📡 Shut down. WPS (hackable).
- 📊 Enable DDoS Protection (if any in the settings).
- 🔍 Check connected devices in Settings → Connected devices (remove unknown devices).